{"format":"radcom-hot-topics-library","version":1,"exportedAt":"2026-11-22T13:23:13.280Z","topics":[{"id":"hf-digital","name":"HF & Digital Modes","short":"HF & Digital","icon":"Radio","intro":"Start with your station and the kind of contact you want. SSB carries speech; FT8 exchanges short structured messages; JS8 and FreeDV explore different ways to communicate on HF.","tags":["SSB","FT8","JS8","FreeDV"]},{"id":"mesh-radio","name":"Mesh Radio","short":"Mesh Radio","icon":"Network","intro":"Mesh is a family of networks, not a shared protocol. Meshtastic and MeshCore use LoRa radios; AREDN targets broadband links. Match hardware, frequency plan and software before expecting devices to talk.","tags":["Meshtastic","MeshCore","AREDN","Reticulum"]},{"id":"maps-tracking","name":"Maps, Tracking & Direction Finding","short":"Maps & Tracking","icon":"Map","intro":"A map shows information supplied to it. ATAK, OsmAnd and APRS can organize position data; finding a transmitter requires actual radio measurements or bearings, plus a suitable antenna and receiver.","tags":["ATAK","OsmAnd","APRS","Direction finding"]},{"id":"sdr-discovery","name":"SDR & Signal Discovery","short":"SDR & Discovery","icon":"AudioLines","intro":"A software-defined radio turns received signals into data you can see and study. Begin with a known signal, appropriate antenna and gain setting; identify unfamiliar signals cautiously.","tags":["SDR","Waterfalls","Decoding","Shortwave"]},{"id":"portable-field","name":"Portable & Field Radio","short":"Portable & Field","icon":"Tent","intro":"A good field station balances antenna, power, weight and operating time. Start with a repeatable setup and a short outing, then keep notes on what actually improved contacts.","tags":["Field Day","POTA","SOTA","QRP"]},{"id":"cw-morse","name":"CW & Morse","short":"CW & Morse","icon":"KeyRound","intro":"Learn the sound of a character as a rhythm. Short sessions, comfortable spacing and a small character set help build recognition before faster exchanges and on-air practice.","tags":["Keys","Paddles","Trainers","Technique"]},{"id":"digital-voice","name":"Digital Voice & Connected Repeaters","short":"Digital Voice","icon":"Mic","intro":"DMR, D-STAR and C4FM are different digital voice systems. Repeaters and internet-linked hotspots may connect them in specific ways; support depends on the device, service and configuration.","tags":["DMR","D-STAR","C4FM","SharkRF"]},{"id":"remote-control","name":"Remote Stations & Radio Control","short":"Remote Control","icon":"Monitor","intro":"Remote operating combines radio control, audio and a dependable network. Plan receiver access, authentication, power recovery and a safe way to stop transmission before leaving a station unattended.","tags":["SmartLink","VPN","CAT","Networking"]},{"id":"space-radio","name":"Satellites & Space Radio","short":"Space Radio","icon":"Satellite","intro":"Satellite passes, equipment status and event windows change. Check current operator notices and pass predictions before a listening session; an archived event is still useful learning material.","tags":["ISS","SSTV","Satellites","Telemetry"]},{"id":"antennas-diy","name":"Antennas, DIY & Station Building","short":"Antennas & DIY","icon":"Wrench","intro":"Build, measure, adjust and record. Antenna measurements depend on the feed line, surroundings and calibration. A useful project report includes its limitations as well as its successful result.","tags":["Antennas","Analyzers","Projects","Station builds"]}],"resources":[{"id":"airspy-ranger-development-watch","title":"Airspy Ranger development watch: the 2025 prototype update","summary":"Airspy’s Ranger page describes an SDR receiver intended to extend its HF+ approach into wider coverage, with a listed target spanning 0.5 kHz to 2.6 GHz. Crucially, the page’s dated June 6, 2025 update discusses working samples and production optimization. That is evidence of development, not proof of current retail shipment. Keep Ranger on a watchlist until availability and final specifications are independently established.","canonicalUrl":"https://airspy.com/airspy-ranger/","topics":["sdr-discovery","hf-digital"],"tags":["Airspy","Ranger","receiver","development watch","prototype","product announcement"],"kind":"News","maturity":"Experimental","level":"Intermediate","sources":[{"label":"Airspy Ranger development and architecture page","url":"https://airspy.com/airspy-ranger/","type":"Manufacturer","checkedAt":"2026-10-27T02:40:23.000Z","note":"June 6, 2025 sample update, design goals and proposed coverage."}],"body":[{"heading":"Look beyond the tuning range","text":"Airspy emphasizes front-end filtering, automatic gain control and handling of strong signals. Those design goals address a different question from the headline tuning range: whether a weak desired signal remains usable around powerful unwanted signals. They remain manufacturer performance statements."},{"heading":"What would move this forward","text":"Before planning a station around Ranger, look for a dated shipping notice, a final manual, supported software and an actual seller listing. Keep the development update’s date visible rather than presenting an old prototype milestone as this week’s launch."}],"caveats":["Development status: the reviewed page did not establish current shipment.","No independent measurements or purchase availability were verified."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:40:23.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:48:26.772Z","updatedAt":"2026-10-27T02:48:26.772Z"},{"id":"amsat-satellite-primer","title":"Learn satellite tracking, Doppler, and operating basics","summary":"AMSAT links a freely downloadable compilation of Keith Baker's introductory satellite articles. It explains concepts such as finding a pass, interpreting orbital data, listening for beacons, and allowing for Doppler shift. Keep it as a foundation resource alongside current satellite-status and frequency information. AMSAT itself cautions that the articles' equipment, satellites, and links can age, so the library should preserve the historical context rather than present every example as current.","canonicalUrl":"https://www.amsat.org/introduction-to-working-amateur-satellites/","topics":["space-radio","portable-field"],"tags":["AMSAT","satellites","Doppler","tracking","PDF"],"kind":"Manual","maturity":"Historical","level":"Beginner","sources":[{"label":"AMSAT beginner resources","url":"https://www.amsat.org/introduction-to-working-amateur-satellites/","type":"Official documentation","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."},{"label":"For Beginners: An Amateur Radio Satellite Primer","url":"https://www.amsat.org/wordpress/wp-content/uploads/2023/06/For_Beginners_Compilation.pdf","type":"Official documentation","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."}],"body":[],"caveats":["The articles appeared during 2019–2021. Treat named satellite availability and equipment details as historical until checked."],"reactions":[],"media":{"src":"/hot-topics-media/iss2010.jpg","alt":"ISS photographed after STS-132 undocking (archival photograph, May 2010).","credit":"NASA / Crew of STS-132","license":"Public domain in the United States (NASA)","licenseUrl":"https://www.nasa.gov/nasa-brand-center/images-and-media/","sourceUrl":"https://commons.wikimedia.org/wiki/File:International_Space_Station_after_undocking_of_STS-132.jpg"},"attachments":[{"label":"AMSAT satellite primer (PDF)","url":"https://www.amsat.org/wordpress/wp-content/uploads/2023/06/For_Beginners_Compilation.pdf","hosted":false,"license":"Original source; no mirrored copy"},{"label":"Radcom field-session checklist (TXT, v2)","url":"/hot-topics-downloads/field-checklist.txt","hosted":true,"license":"Radcom original · CC BY 4.0"}],"checkedAt":"2026-10-27T00:18:03.810Z","sourcePublishedAt":null,"status":"published","revision":2,"createdAt":"2026-10-27T00:44:47.408Z","updatedAt":"2026-10-27T02:12:44.385Z"},{"id":"aprs-maps-messages-basics","title":"APRS: understand the packets behind the map","summary":"APRS carries positions, weather, objects, status information and messages; its original designer explicitly described a broader purpose than vehicle tracking. A map is one view of that information. For a club outing, understanding where a report came from matters as much as seeing its symbol. A position arriving through an internet service does not by itself demonstrate a working radio path from your station to the other operator.","canonicalUrl":"https://www.aprs.org/aprs.html","topics":["maps-tracking","portable-field","remote-control"],"tags":["APRS","APRS-IS","iGate","packet radio","maps","position privacy"],"kind":"Guide","maturity":"Reference","level":"Beginner","sources":[{"label":"Bob Bruninga APRS overview","url":"https://www.aprs.org/aprs.html","type":"Developer","checkedAt":"2026-10-27T02:36:30.000Z","note":"Original designer explains APRS information exchange beyond position tracking."},{"label":"aprs.fi iOS developer guide","url":"https://ios-guide.aprs.fi/","type":"Developer","checkedAt":"2026-10-27T02:36:30.000Z","note":"Documents RF versus network paths, acknowledgements, position history and public messaging."}],"body":[{"heading":"Separate radio reception from internet delivery","text":"The aprs.fi developer guide distinguishes reports received through a radio/TNC from network data. It also explains that a receive-only gateway can forward packets toward the internet without providing a return radio path. When testing a message, look for its actual acknowledgement and record how each end connected rather than assuming a visible map pin proves two-way service."},{"heading":"Plan what you are willing to publish","text":"APRS-IS positions and messages are public, and other services may retain them after local deletion. Agree on group privacy expectations before enabling position beacons. For ordinary map reading, inspect the report time and source: an old or estimated position should not be treated as a fresh observation of a person's whereabouts."}],"caveats":["The original APRS site contains historical material; this entry uses its foundational explanation, not old event notices.","This is not a private messenger or a guaranteed emergency-delivery service."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:36:30.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:50:52.798Z","updatedAt":"2026-10-27T02:50:52.798Z"},{"id":"aredn-october-2026-rc","title":"AREDN's October release candidate: a testing checklist","summary":"AREDN's October release-candidate page asks operators to test radio, tunnel and network changes before a stable release is selected. It covers multiple-radio operation, channel selection, migration behavior and a reboot issue affecting some MikroTik hardware. This is a useful checklist for a test node and for coordinating upgrades with neighboring stations on an existing broadband amateur-radio network.","canonicalUrl":"https://www.arednmesh.org/content/release-candidate-october-2026","topics":["mesh-radio","remote-control"],"tags":["AREDN","broadband mesh","release candidate","networking","MikroTik"],"kind":"News","maturity":"Experimental","level":"Intermediate","sources":[{"label":"AREDN release-candidate notes","url":"https://www.arednmesh.org/content/release-candidate-october-2026","type":"Official documentation","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."},{"label":"AREDN documentation","url":"https://docs.arednmesh.org/en/latest/index.html","type":"Official documentation","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."}],"body":[],"caveats":["Label this testing software, not a final stable release.","The project asks users to back up configuration and identify the precise build when reporting problems.","AREDN broadband networking and LoRa messaging have different hardware and network requirements."],"reactions":[],"media":null,"attachments":[{"label":"Radcom mesh field-test worksheet (TXT, v2)","url":"/hot-topics-downloads/mesh-field-test.txt","hosted":true,"license":"Radcom original · CC BY 4.0"}],"checkedAt":"2026-10-27T00:18:03.810Z","sourcePublishedAt":null,"status":"published","revision":2,"createdAt":"2026-10-27T00:44:50.569Z","updatedAt":"2026-10-27T02:11:17.631Z"},{"id":"ariss-school-contact-listening","title":"Listening to an ISS school contact","summary":"The school named in an ARISS announcement can be thousands of kilometres from the ground station speaking to the International Space Station. The contact type tells you where the radio link begins. Use the scheduled time and your own location to decide whether to try a receiver or follow a public stream.","canonicalUrl":"https://www.ariss.org/about-ariss-contacts.html","topics":["space-radio","remote-control"],"tags":["ARISS","ISS","telebridge","pass planning","school contacts"],"kind":"Guide","maturity":"Reference","level":"Beginner","sources":[{"label":"ARISS — About ARISS Contacts","url":"https://www.ariss.org/about-ariss-contacts.html","type":"Official documentation","checkedAt":"2026-11-07T13:06:00.000Z","note":"Describes direct, telebridge and virtual contacts and public listening options. Publication date unspecified."},{"label":"ARISS — Upcoming Educational Contacts","url":"https://www.ariss.org/upcoming-educational-contacts.html","type":"Official documentation","checkedAt":"2026-11-07T13:06:00.000Z","note":"November 5, 2026 schedule lists the two planned contacts. Event notices also explain reception within the ISS footprint."}],"body":[{"heading":"Find the ground station","text":"For a direct contact, the school hosts the radio station. For a telebridge, a separate ARISS station talks to the ISS and passes the audio to the school by telephone. To hear the astronaut over the air, your receiver must be within reach of the ISS downlink during that ground station’s pass. Check the event notice for the listening frequency and compare the UTC time with an ISS pass prediction for your location."},{"heading":"Read a dated schedule","text":"The November 5, 2026 schedule paired a school in Sparks, Nevada, with ground station IK1SLD for November 10 at 18:16 UTC. It paired a school in Halifax, Nova Scotia, with VK4ISS for November 13 at 18:07 UTC. These were scheduled starts, rounded to the minute. The Sparks listing also pointed listeners to a school livestream."}],"caveats":["Recheck the event notice shortly before listening. A published schedule alone cannot confirm that a contact took place.","If you follow an official stream, identify it as the source of your listening report. For over-the-air reception, log your own UTC time and what you could hear."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-11-07T13:06:00.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-11-07T13:06:49.254Z","updatedAt":"2026-11-07T13:06:49.254Z"},{"id":"ariss-sstv-receive-prepare","title":"Prepare for an ISS SSTV session without waiting for a live pass","summary":"SSTV sends pictures through an audio signal that software converts into an image. ARISS provides reception guidance, a gallery of dated submissions and a sample recording with a corresponding image for checking a receiving setup. These resources let you rehearse the audio-to-decoder path before a scheduled ISS event. An archived picture is evidence of a past reception, not evidence that a transmission is underway now.","canonicalUrl":"https://ariss-usa.org/ARISS_SSTV/faq.php","topics":["space-radio","sdr-discovery","portable-field"],"tags":["ISS","ARISS","SSTV","image decoding","receive only","practice"],"kind":"Guide","maturity":"Reference","level":"Beginner","sources":[{"label":"ARISS: SSTV frequently asked questions","url":"https://ariss-usa.org/ARISS_SSTV/faq.php","type":"Official documentation","checkedAt":"2026-10-27T02:36:31.000Z","note":"Reception workflow, event-specific mode/frequency guidance, SuitSat test audio and submission review."},{"label":"ARISS: SSTV gallery","url":"https://ariss-usa.org/ARISS_SSTV/","type":"Official documentation","checkedAt":"2026-10-27T02:36:31.000Z","note":"Received images are associated with missions and acquisition timestamps, including October 2026 submissions."}],"body":[{"heading":"Rehearse the audio path","text":"Use the official sample recording and compare your decoded result with its reference image. Check audio routing and level before adding the moving satellite to the problem. When an event is announced, verify its actual mode and downlink instructions rather than reusing settings from a different mission."},{"heading":"Read dates before chasing images","text":"Use the gallery’s mission and acquisition timestamps to understand what was received. ARISS reviews submissions, so appearing in a gallery is not instantaneous. Keep source images at their original page unless separate reuse terms permit copying. Check the current operations notice again before planning a pass."}],"caveats":["No SSTV event is represented as live, and no image was decoded during this research.","Mode and frequency details in an event FAQ can change between missions."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:36:31.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:50:35.947Z","updatedAt":"2026-10-27T02:50:35.947Z"},{"id":"ariss-station-status","title":"Check the ISS radio before planning a pass","summary":"ARISS's November 4, 2026 status notice schedules Columbus and Zvezda radio interruptions for spacewalk support on November 4–6. Check that notice alongside pass predictions before listening. The planned restart times do not confirm that either radio has returned to service.","canonicalUrl":"https://www.ariss.org/current-status-of-iss-stations.html","topics":["space-radio","maps-tracking"],"tags":["ISS","ARISS","SSTV","APRS","satellites","status"],"kind":"Guide","maturity":"Reference","level":"Beginner","sources":[{"label":"ARISS Current Status of ISS Stations","url":"https://www.ariss.org/current-status-of-iss-stations.html","type":"Official documentation","checkedAt":"2026-11-05T13:03:57.000Z","note":"November 4 status notice; separate Columbus and Zvezda planned EVA interruptions. Scheduled restarts are not verified reception."}],"body":[{"heading":"Planned interruption: November 4–6, 2026","text":"The notice schedules Columbus power-down for November 4 at 14:30 UTC and restart for November 6 at 10:15 UTC. Zvezda's corresponding times are 14:35 UTC and 10:20 UTC. All times are provisional; this entry does not independently confirm shutdown or restoration."},{"heading":"Match the station to the activity","text":"The notice lists Columbus in voice-repeater mode and Zvezda APRS active while troubleshooting continues. SSTV is a separately announced activity. Check the source's date and operating mode before choosing a pass; silence during a planned outage need not indicate a fault in your receiver."}],"caveats":["Status notice dated November 4, 2026; schedules and modes may change.","No live reception or restoration was verified. No SSTV event is claimed to be underway."],"reactions":[],"media":{"src":"/hot-topics-media/iss2010.jpg","alt":"ISS photographed after STS-132 undocking (archival photograph, May 2010).","credit":"NASA / Crew of STS-132","license":"Public domain in the United States (NASA)","licenseUrl":"https://www.nasa.gov/nasa-brand-center/images-and-media/","sourceUrl":"https://commons.wikimedia.org/wiki/File:International_Space_Station_after_undocking_of_STS-132.jpg"},"attachments":[],"checkedAt":"2026-11-05T13:03:57.000Z","sourcePublishedAt":null,"status":"published","revision":3,"createdAt":"2026-10-27T00:44:47.627Z","updatedAt":"2026-11-05T13:03:58.504Z"},{"id":"arrl-simple-antennas","title":"Start with the antenna system: wire, feed line, and placement","summary":"ARRL's simple-antenna resource hub connects introductions to feed lines, HF antennas, and VHF/UHF designs. It is a useful place to compare the choices behind a first station or a portable rebuild, from wire antennas to directional options. Use the linked explanations to frame what you want an antenna to do before buying parts, and keep the whole antenna system in view when judging results.","canonicalUrl":"https://www.arrl.org/building-simple-antennas","topics":["antennas-diy","hf-digital"],"tags":["antennas","feed line","HF","VHF","UHF","DIY"],"kind":"Guide","maturity":"Reference","level":"Beginner","sources":[{"label":"ARRL Building Simple Antennas","url":"https://www.arrl.org/building-simple-antennas","type":"Official documentation","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."}],"body":[],"caveats":["This is a reference hub, not a tested construction plan for a particular installation.","No publication date was supplied by the source page; do not mark it as a new October development."],"reactions":[],"media":{"src":"/hot-topics-media/nanovna.jpg","alt":"NanoVNA showing a Smith chart (illustrative equipment photograph).","credit":"Elgull / Wikimedia Commons","license":"CC BY-SA 4.0","licenseUrl":"https://creativecommons.org/licenses/by-sa/4.0/","sourceUrl":"https://commons.wikimedia.org/wiki/File:NanoVNA.jpg"},"attachments":[],"checkedAt":"2026-10-27T00:18:03.810Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T00:44:46.985Z","updatedAt":"2026-10-27T00:44:46.985Z"},{"id":"buckmaster-ocf-antenna-family","title":"Buckmaster OCF antennas: compare bands, span and installation","summary":"Buckmaster’s off-center-fed antenna family offers several wire lengths and band combinations. The manufacturer’s seven-band model uses a 135-foot wire span, while shorter and longer models trade space against coverage. This established product reference helps compare a specific Buckmaster installation with the space actually available. An off-center-fed antenna has unequal wire sections and should not be confused with a center-fed G5RV design.","canonicalUrl":"https://www.hamcall.net/7bandocf.html","topics":["antennas-diy"],"tags":["Buckmaster","OCF","off-center-fed","wire antennas","multiband","Buck master"],"kind":"Guide","maturity":"Reference","level":"Intermediate","sources":[{"label":"Buckmaster/HamCall OCF product reference","url":"https://www.hamcall.net/7bandocf.html","type":"Manufacturer","checkedAt":"2026-10-27T02:46:06.000Z","note":"Manufacturer models, dimensions and installation qualifications."}],"body":[{"heading":"Choose by physical space and bands","text":"List the bands you want before choosing the model. Buckmaster describes four-, seven- and eight-band variants with different spans and unequal leg lengths. Mark both end locations and the feedpoint on a site plan. The advertised overall length alone does not reveal where supports or the coax route must go."},{"heading":"Check the installation conditions","text":"The manufacturer’s guidance makes mounting geometry and surroundings part of achieving the intended match. Review those conditions before relying on a tuner-free claim. Power options also need their stated operating qualifications. Compare the exact model, intended mode and sustained use rather than treating the largest listed wattage as universal."}],"caveats":["No new launch claimed. Match and usable power depend on configuration and installation."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:46:06.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:49:42.453Z","updatedAt":"2026-10-27T02:49:42.453Z"},{"id":"buddipole-mini-buddihex-portable-beam","title":"Mini-BuddiHEX: a portable beam for 12, 10 and 6 meters","summary":"Buddipole’s Mini-BuddiHEX is a compact hexbeam covering 12, 10 and 6 meters. The manufacturer lists a weight of 5.6 pounds and a turning radius of about six feet four inches. Those dimensions make it an interesting portable-station reference, especially where a directional antenna is practical. Its three-band coverage also makes the tradeoff clear: this model does not replace a lower-HF antenna.","canonicalUrl":"https://www.buddipole.com/minibuddihex.html","topics":["antennas-diy","portable-field"],"tags":["Buddipole","Mini-BuddiHEX","hexbeam","portable antennas","6 meters"],"kind":"Guide","maturity":"Reference","level":"Intermediate","sources":[{"label":"Mini-BuddiHEX manufacturer listing","url":"https://www.buddipole.com/minibuddihex.html","type":"Manufacturer","checkedAt":"2026-10-27T02:46:06.000Z","note":"Coverage, dimensions and configuration options."}],"body":[{"heading":"Plan the whole footprint","text":"The antenna’s listed weight is only one part of the support problem. Account for mast capability, wind, guying and clear space around the full turning circle. Draw the proposed operating area before choosing a location, and check whether the antenna can rotate without approaching people, structures or electrical lines."},{"heading":"Choose the feedpoint and coverage","text":"The maker offers feedpoint connector options and supplies pre-tuned wires and transport accessories. Check the exact configuration’s instructions and ratings before ordering. Decide whether the available bands suit your intended contacts, then include mast, coax and packing requirements when comparing the complete station with a simpler wire antenna."}],"caveats":["No release date verified. Ordering and availability must be checked with the maker."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:46:06.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:49:13.019Z","updatedAt":"2026-10-27T02:49:13.019Z"},{"id":"buddipole-powerpro-field-power","title":"Buddipole PowerPro: solar charging and DC management for a field station","summary":"Buddipole PowerPro combines solar charging, battery monitoring and DC power management in one station accessory. The manufacturer specifies an MPPT solar charger and provides a display for tracking power flow. It is worth studying when a field setup has grown beyond a battery connected directly to a radio. The useful comparison is the complete power system, including battery chemistry, charging settings, connectors and actual operating load.","canonicalUrl":"https://www.buddipole.com/powerpro.html","topics":["portable-field"],"tags":["Buddipole","PowerPro","solar","MPPT","battery management","field power"],"kind":"Guide","maturity":"Reference","level":"Intermediate","sources":[{"label":"PowerPro manufacturer specifications","url":"https://www.buddipole.com/powerpro.html","type":"Manufacturer","checkedAt":"2026-10-27T02:46:06.000Z","note":"Integrated charging, monitoring and protection functions."}],"body":[{"heading":"Start with a power budget","text":"List receive, transmit and accessory loads and estimate how long each will run. Then compare battery capacity and charging opportunities with that demand. PowerPro can display battery and solar activity, but a controller cannot create energy when shading, weather or a small panel limits the available solar input."},{"heading":"Check the electrical combination","text":"Confirm the battery’s required charging profile, panel input limits and output requirements against the current documentation. Buddipole lists adjustable voltage protection and dual Powerpole outputs. Those features are useful only when configured for the connected equipment; a connector that physically fits does not establish compatible voltage, chemistry or current limits."}],"caveats":["Established product reference; no dated launch verified. Confirm battery and panel compatibility."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:46:06.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:49:10.156Z","updatedAt":"2026-10-27T02:49:10.156Z"},{"id":"chameleon-f-loop-4-magnetic-loop-preview","title":"Magnetic loops: Chameleon previews F-LOOP 4.0","summary":"Chameleon’s F-LOOP 4.0 page is a pre-production preview of a manually tuned magnetic loop for 40 through 10 meters. The manufacturer targets December 2026 but explicitly says that timing is not guaranteed and is not accepting orders or deposits. Alongside the product watch, this is a practical introduction to magnetic loops: compact dimensions come with narrow tuning bandwidth, installation sensitivity and operating limits.","canonicalUrl":"https://chameleonantenna.com/products/cha-f-loop-4-0","topics":["antennas-diy","portable-field"],"tags":["Chameleon","F-LOOP 4.0","magnetic loop","QRP","product preview","magloop","magloops"],"kind":"News","maturity":"Experimental","level":"Intermediate","sources":[{"label":"F-LOOP 4.0 manufacturer preview","url":"https://chameleonantenna.com/products/cha-f-loop-4-0","type":"Manufacturer","checkedAt":"2026-10-27T02:46:06.000Z","note":"Target December 2026, explicitly not guaranteed."},{"label":"Chameleon loop Q and bandwidth guide","url":"https://chameleonantenna.com/pages/ckb-f-loop-q-and-bandwidth","type":"Manufacturer","checkedAt":"2026-10-27T02:46:06.000Z","note":"Practical narrow-bandwidth explanation."},{"label":"F-LOOP 3.0 safety guidance","url":"https://chameleonantenna.com/pages/ckb-cha-f-loop-3-0-safety-inspection-and-maintenance","type":"Manufacturer","checkedAt":"2026-10-27T02:46:06.000Z","note":"Supports general loop hazards; old-model limits are not transferred."}],"body":[{"heading":"Understand the tuning tradeoff","text":"Chameleon’s loop guidance explains that high-Q operation produces a narrow usable bandwidth, so changing frequency or surroundings can require retuning. A broad SWR curve can also reflect loss. Treat a convenient match as one measurement, not proof of efficiency, and compare antenna behavior in the actual intended operating location."},{"heading":"Wait for final operating documentation","text":"The preview describes a new architecture and prototype ratings; older F-LOOP accessories and limits should not be assumed compatible. Small transmitting loops can develop significant RF voltage and current. Keep people clear and never touch a transmitting loop. Use the final model’s instructions for power, exposure and installation requirements."}],"caveats":["Pre-production target only. Published simulations and indoor traces are not independent field-performance evidence."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:46:06.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:49:39.102Z","updatedAt":"2026-10-27T02:49:39.102Z"},{"id":"cw-academy-learning","title":"Find a guided route into CW with CW Academy","summary":"CWops presents CW Academy for beginners, returning operators, and people who want to improve copying and sending. Its site links to course options, student resources, and practice opportunities. This is a useful route for someone who prefers guided learning and conversation with other operators alongside solo exercises. Check the current course options and student portal for timing and participation details before making plans.","canonicalUrl":"https://cwops.org/cw-academy/","topics":["cw-morse","portable-field"],"tags":["CW","Morse","CWops","mentoring","practice"],"kind":"Guide","maturity":"Reference","level":"Beginner","sources":[{"label":"CWops CW Academy","url":"https://cwops.org/cw-academy/","type":"Official documentation","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."},{"label":"CW Academy student resources","url":"https://cwops.org/cw-academy/cw-academy-student-resources/","type":"Official documentation","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."}],"body":[],"caveats":["No enrollment availability or schedule is promised in this entry.","The program description and resource pages were read; no course or portal account was tested."],"reactions":[],"media":{"src":"/hot-topics-media/morse-key.jpg","alt":"Wooden-based Morse key (illustrative equipment photograph).","credit":"Lauren.mcalary / Wikimedia Commons","license":"CC BY-SA 4.0","licenseUrl":"https://creativecommons.org/licenses/by-sa/4.0/","sourceUrl":"https://commons.wikimedia.org/wiki/File:Morse_Key.jpg"},"attachments":[{"label":"Radcom field-session checklist (TXT, v2)","url":"/hot-topics-downloads/field-checklist.txt","hosted":true,"license":"Radcom original · CC BY 4.0"}],"checkedAt":"2026-10-27T00:18:03.810Z","sourcePublishedAt":null,"status":"published","revision":2,"createdAt":"2026-10-27T00:44:47.838Z","updatedAt":"2026-10-27T02:12:41.132Z"},{"id":"dmr-hotspot-network-basics","title":"DMR hotspots: connect securely and understand linked talkgroups","summary":"A hotspot combines the local radio connection with a separately configured network connection. WPSD’s DMR guide walks through the operator ID, DMR mode and BrandMeister network settings, including the hotspot-security password created in SelfCare. SharkRF’s DMR documentation explains why talkgroup behavior can differ by network. Treat these as two layers to check: reaching your hotspot is not the same as reaching the intended conversation.","canonicalUrl":"https://manual.wpsd.radio/modes/dmr/","topics":["digital-voice","remote-control"],"tags":["DMR","hotspot","BrandMeister","WPSD","networking","static talkgroups"],"kind":"Guide","maturity":"Reference","level":"Beginner","sources":[{"label":"WPSD: DMR configuration","url":"https://manual.wpsd.radio/modes/dmr/","type":"Developer","checkedAt":"2026-10-27T02:36:31.000Z","note":"DMR identity, BrandMeister SelfCare hotspot-security password and network configuration."},{"label":"SharkRF: DMR talkgroup behavior","url":"https://manuals.sharkrf.com/m1ke/basic/dmrusage.html","type":"Manufacturer","checkedAt":"2026-10-27T02:36:31.000Z","note":"Distinguishes static, dynamic and auto-static linking and network-specific behavior."}],"body":[{"heading":"Start with one network","text":"Confirm your ID, selected network master and hotspot-security credential against the current project instructions. Keep the credential private. Prove one known configuration before adding gateways or cross-mode routing. If local reception works but network audio does not, inspect the connection status and authentication before changing radio hardware."},{"heading":"Know what remains linked","text":"Static talkgroups remain linked; dynamic links normally expire according to network settings. SharkRF documents a further BrandMeister auto-static behavior, so a simple timeout assumption can be wrong. Check the network’s own linking and unlinking instructions, and avoid carrying unwanted traffic by enabling many groups without understanding their behavior."}],"caveats":["Timing, linking and gateway behavior vary by server and configuration.","No hotspot account, credential or live RF connection was tested."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:36:31.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:50:04.143Z","updatedAt":"2026-10-27T02:50:04.143Z"},{"id":"dmr-id-first-codeplug","title":"DMR first setup: your radio ID and a small codeplug","summary":"A DMR codeplug is the radio configuration that connects your identity, contacts, channels and zones. WPSD’s AnyTone walkthrough shows how those pieces depend on one another. Begin with a backup and a small working configuration before importing a large channel collection. BridgeCom directs US amateurs to RadioID for registration; BrandMeister’s June 2026 notice also makes ongoing ID verification part of keeping an existing setup usable.","canonicalUrl":"https://manual.wpsd.radio/zero_hero/anytone_878/","topics":["digital-voice"],"tags":["DMR","radio ID","RadioID","codeplug","AnyTone","CPS"],"kind":"Guide","maturity":"Reference","level":"Beginner","sources":[{"label":"WPSD: AnyTone codeplug walkthrough","url":"https://manual.wpsd.radio/zero_hero/anytone_878/","type":"Developer","checkedAt":"2026-10-27T02:36:31.000Z","note":"Radio ID, contacts, channels, zones, backup and firmware-matched programming example."},{"label":"BridgeCom: obtaining a DMR ID","url":"https://support.bridgecomsystems.com/obtaining-your-dmr-id","type":"Manufacturer","checkedAt":"2026-10-27T02:36:31.000Z","note":"US-oriented registration and license-document guidance; directs service questions to RadioID."},{"label":"BrandMeister: annual RadioID verification","url":"https://news.brandmeister.network/new-annual-verification-process-by-radioid-net/","type":"Official documentation","checkedAt":"2026-10-27T02:36:31.000Z","note":"June 15, 2026 network notice describes annual verification beginning July 1."}],"body":[{"heading":"Build one understandable setup","text":"Use programming software matched to the radio model and firmware. Read and save the radio’s current configuration first. Add your assigned ID and a contact, then a channel that references them, then a zone containing that channel. WPSD’s sequence is an example to understand, not a universal file for every radio."},{"heading":"Keep identity maintenance separate","text":"BrandMeister says annual RadioID verification began July 1, 2026. Keep account details current and check the official service directly when a verification request arrives. A downloaded contact database identifies other operators; it does not replace your own assigned ID or establish that a radio is configured correctly."}],"caveats":["The programming walkthrough is model-specific; no radio was programmed or factory-reset for this entry.","Direct RadioID FAQ content could not be inspected; registration guidance here is attributed to BridgeCom and BrandMeister."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:36:31.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:49:49.260Z","updatedAt":"2026-10-27T02:49:49.260Z"},{"id":"dmr-talkgroups-slots-colorcodes","title":"DMR channels explained: talkgroups, time slots and color codes","summary":"Getting a DMR channel right involves more than entering a frequency. A talkgroup selects the group being addressed; a time slot selects one of the two shared channels in conventional two-slot DMR operation; a color code must match the intended system. DMR-MARC explains these distinctions. The repeater operator’s current information supplies the actual settings, which can differ between nearby networks.","canonicalUrl":"https://dmr-marc.net/media/DMR-FAQs.pdf","topics":["digital-voice"],"tags":["DMR","talkgroups","time slots","color codes","repeaters","DMRVA"],"kind":"Guide","maturity":"Reference","level":"Beginner","sources":[{"label":"DMR-MARC: DMR FAQs","url":"https://dmr-marc.net/media/DMR-FAQs.pdf","type":"Official documentation","checkedAt":"2026-10-27T02:36:31.000Z","note":"Explains color codes, two time slots and talkgroups; older product/network examples are not treated as current."},{"label":"DMRVA: network talkgroup matrix","url":"https://www.dmrva.org/talkgroups/","type":"Official documentation","checkedAt":"2026-10-27T02:36:31.000Z","note":"Operator page identifies a July 25, 2026 matrix and its DMRVA/N4HRS-only scope."}],"body":[{"heading":"Separate access from destination","text":"Read the operator’s receive/transmit frequencies, color code, slot and permitted talkgroup together. Two talkgroups on one slot still share that slot’s airtime; changing a group number does not create another independent radio channel. When troubleshooting, compare each field individually instead of repeatedly replacing the entire codeplug."},{"heading":"Use a network-specific reference","text":"DMRVA publishes a matrix covering its own and N4HRS repeaters, with a July 2026 update. Its page explicitly excludes other networks, including BrandMeister. Use it as an example of authoritative local documentation, then consult the operator of the repeater you actually intend to use."}],"caveats":["The DMR-MARC FAQ contains older equipment/network examples; this guide uses its basic terminology only.","No particular repeater, frequency or talkgroup is claimed available at your location."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:36:31.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:49:52.000Z","updatedAt":"2026-10-27T02:49:52.000Z"},{"id":"dx-launcher-one-shot-antenna-line-tool","title":"DX Launcher One-Shot: getting an antenna line into position","summary":"The DX Launcher One-Shot is a line-launching accessory intended to help place a lightweight line for an antenna support. Its maker’s listing combines the launcher with a reel, line weights and replaceable rubber components. This product reference addresses an easily overlooked part of portable operating: how to put the antenna where it belongs while keeping the surrounding area clear and the setup controlled.","canonicalUrl":"https://www.hamradio247.com/shop/p/the-one-shot-slingshot","topics":["portable-field","antennas-diy"],"tags":["DX Launcher","One-Shot","antenna support","field accessories"],"kind":"Guide","maturity":"Reference","level":"Beginner","sources":[{"label":"One-Shot maker listing","url":"https://www.hamradio247.com/shop/p/the-one-shot-slingshot","type":"Manufacturer","checkedAt":"2026-10-27T02:46:06.000Z","note":"Maker-branded product page; no availability promise."}],"body":[{"heading":"Evaluate the site before the tool","text":"Choose a location with permission and a clear path, well away from overhead electrical conductors, people, animals and vehicles. Consider where the weight and line could land if the attempt misses. Eye protection, component inspection and the maker’s operating instructions belong in the setup routine before any launch."},{"heading":"Include retrieval in the plan","text":"A successful placement still needs a practical way to retrieve the line and leave the site clean. Compare the tool’s packed size, replacement components and support-line workflow with your available space. A launcher does not assess tree condition, attachment strength or whether a particular public site permits its use."}],"caveats":["No global launch date was verified. The checked listing offered an in-stock notification."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:46:06.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:49:03.565Z","updatedAt":"2026-10-27T02:49:03.565Z"},{"id":"dxengineering-portable-station-package-announcement","title":"Portable station packages: compare the complete equipment list","summary":"DX Engineering's OnAllBands post dated November 2, 2026 highlights its HF portable-station packages. This is a retailer's announcement about its own offerings, not an independent review or a launch date for every included product. The packages combine radios with different antenna, power and support arrangements.","canonicalUrl":"https://www.onallbands.com/new-products-spotlight-for-november-2026-pota-packages-satellite-friendly-antennas-more/","topics":["portable-field","antennas-diy"],"tags":["DX Engineering","portable station","POTA","field power","FTX-1 Field","accessories","retailer announcement"],"kind":"News","maturity":"Reference","level":"Beginner","sources":[{"label":"DX Engineering / OnAllBands — November product spotlight","url":"https://www.onallbands.com/new-products-spotlight-for-november-2026-pota-packages-satellite-friendly-antennas-more/","type":"Manufacturer","checkedAt":"2026-11-04T12:58:19.000Z","note":"Primary commercial source from the package supplier and retailer; November 2 publication date, not individual component launch dates."},{"label":"DX Engineering — DXE-POTA-10 package contents","url":"https://www.dxengineering.com/part/dx-engineering/dxe-pota-10/8611041","type":"Manufacturer","checkedAt":"2026-11-04T12:58:19.000Z","note":"Supplier's itemized package list; used for included equipment, not current shipping or independent performance."}],"body":[{"heading":"Use one package as a planning example","text":"The DXE-POTA-10 listing combines an FTX-1 Field, a 40–10 metre end-fed wire antenna, battery and charger, mast, feedline choke, cables, rope and backpack. The radio's wider frequency coverage does not establish that the supplied HF antenna covers those additional bands."},{"heading":"Check the limits before choosing","text":"Compare each component's bands, connectors, mode-specific power ratings and supply requirements with your intended outing. Plan battery runtime from your own operating load. Review the current itemized list and original manuals; a bundle description alone does not verify suitability for your site."}],"caveats":["Commercial-source disclosure: OnAllBands is DX Engineering's blog, and DX Engineering sells these packages. This entry is informational coverage, not a tested recommendation.","No equipment was tested. Stock, delivery dates and package substitutions were not verified; the retrieved listing displayed an already-past shipping estimate."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-11-04T12:58:19.000Z","sourcePublishedAt":"2026-11-02T00:00:00.000Z","status":"published","revision":1,"createdAt":"2026-11-04T12:58:41.253Z","updatedAt":"2026-11-04T12:58:41.253Z"},{"id":"flex-8600-receiver-architecture","title":"FLEX-8600: when four receivers and two capture units matter","summary":"FlexRadio’s FLEX-8600 is a 100 W HF/6m SDR designed for external control from compatible clients. The manufacturer lists four independent receivers, two spectral capture units, diversity reception and cross-band full-duplex capability. Its comparison chart helps distinguish those capabilities from the two-receiver FLEX-8400 and from M models with a built-in display. This reference focuses on station architecture rather than a performance ranking.","canonicalUrl":"https://www.flexradio.com/products/flex-8600-signature-series-sdr-transceiver/","topics":["hf-digital","sdr-discovery","remote-control"],"tags":["FlexRadio","FLEX-8600","FLEX-8400","diversity","receiver slices","product spotlight"],"kind":"Guide","maturity":"Reference","level":"Intermediate","sources":[{"label":"FlexRadio FLEX-8600 product page","url":"https://www.flexradio.com/products/flex-8600-signature-series-sdr-transceiver/","type":"Manufacturer","checkedAt":"2026-10-27T02:40:23.000Z","note":"100 W operation, receiver count, diversity, client and cross-band features."},{"label":"FlexRadio Signature series comparison","url":"https://www.flexradio.com/comparison/","type":"Manufacturer","checkedAt":"2026-10-27T02:40:23.000Z","note":"8400/8600 receiver and capture-unit differences; M-model displays."}],"body":[{"heading":"Choose the useful capacity","text":"Receiver slices are independently tuned receiving views; they are not extra transmitter chains. Think through a real session: a digital-mode frequency, a voice contact and another band to monitor. More simultaneous receivers are useful only if the antennas, software and workflow support that plan."},{"heading":"Compare the whole system","text":"The 8600’s manufacturer comparison lists two capture units and diversity support, while the 8400 lists one capture unit. Also compare front-panel preference, antenna ports and client software. FlexRadio identifies the Mac and iOS clients as third-party products, so verify their separate requirements."}],"caveats":["Cross-band operation still requires careful antenna isolation and a suitable station design.","Manufacturer specifications were checked; no receiver comparison or contest test was performed."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:40:23.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:48:15.880Z","updatedAt":"2026-10-27T02:48:15.880Z"},{"id":"flex-aurora-integrated-station","title":"FlexRadio Aurora: an SDR station with the amplifier built in","summary":"FlexRadio positions the Aurora AU-510 as an integrated HF/6m station: SDR transceiver, amplifier, automatic tuner and power supply share one chassis. Its product specifications distinguish up to 500 W on HF from up to 200 W on 6m. The headless model uses a SmartSDR client or Maestro for control. This is a current product reference, not a claim that Aurora launched this month.","canonicalUrl":"https://www.flexradio.com/products/aurora-au-510-signature-series/","topics":["hf-digital","sdr-discovery","remote-control"],"tags":["FlexRadio","Aurora","AU-510","SDR","product spotlight","integrated amplifier"],"kind":"Guide","maturity":"Reference","level":"Intermediate","sources":[{"label":"FlexRadio AU-510 product specifications","url":"https://www.flexradio.com/products/aurora-au-510-signature-series/","type":"Manufacturer","checkedAt":"2026-10-27T02:40:23.000Z","note":"Integration, RF output limits, receiver count and tuner range."},{"label":"FlexRadio Aurora family","url":"https://www.flexradio.com/aurora/","type":"Manufacturer","checkedAt":"2026-10-27T02:40:23.000Z","note":"Manufacturer family and model links."}],"body":[{"heading":"Why it matters","text":"Combining the major station boxes can simplify a remote or rack installation. Start by comparing the control interface, receiver count and antenna connections against the station you actually want to run. Integration does not remove the need to plan antennas, cooling and power."},{"heading":"Read the model-specific limits","text":"The AU-510 page lists two slice receivers and a tuner matching range up to 3:1 SWR. Treat transmitter efficiency and signal-quality statements as manufacturer claims. Compare the other Aurora models separately rather than carrying these limits across the entire family."}],"caveats":["No independent RF or remote-operation test was performed.","Confirm present delivery estimates, software entitlements and local operating limits before purchase."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:40:23.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:47:58.052Z","updatedAt":"2026-10-27T02:47:58.052Z"},{"id":"flex-maestro-c-control-console","title":"Maestro C: physical radio controls away from the radio","summary":"Maestro is FlexRadio’s dedicated control console for compatible FLEX-6000, FLEX-8000 and Aurora radios. It combines tuning controls with an eight-inch touchscreen and spectrum display, allowing the radio hardware to sit elsewhere on the network. The current product page and Maestro C specification sheet describe external-monitor support and optional battery operation. This is an established control product, not a newly dated launch.","canonicalUrl":"https://www.flexradio.com/products/maestro-control-console-flex-6000/","topics":["remote-control","sdr-discovery","cw-morse"],"tags":["FlexRadio","Maestro C","control console","CW paddles","network radio","product spotlight"],"kind":"Guide","maturity":"Reference","level":"Intermediate","sources":[{"label":"FlexRadio Maestro product page","url":"https://www.flexradio.com/products/maestro-control-console-flex-6000/","type":"Manufacturer","checkedAt":"2026-10-27T02:40:23.000Z","note":"Supported radio families, display, controls and optional accessories."},{"label":"FlexRadio Maestro C specification sheet","url":"https://edge.flexradio.com/www/offload/20240507151335/FLEX-MaestroC-SpecSheet.pdf","type":"Manufacturer","checkedAt":"2026-10-27T02:40:23.000Z","note":"C-generation controls, external display and interfaces."}],"body":[{"heading":"Match the operating position","text":"A console suits operators who want knobs, a display and a key connection without dedicating a conventional computer to the desk. Compare the cost and portability of that arrangement with the client devices you already own, including the radio hardware required behind the console."},{"heading":"Check the exact generation","text":"Use the Maestro C documents for power, headset and accessory details. Different Maestro generations have different connections, and a combined product page may discuss older accessories too. Confirm microphone wiring and the supplied power accessories before ordering adapters."}],"caveats":["A Maestro console is not a standalone RF transceiver.","Network reliability and compatible radio/software remain necessary; no hands-on evaluation is claimed."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:40:23.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:48:11.996Z","updatedAt":"2026-10-27T02:48:11.996Z"},{"id":"flex-smartlink-reference","title":"SmartLink: the remote-radio connection workflow","summary":"FlexRadio's SmartLink quick-start document walks through software setup, radio registration, connection testing and remote access. It is a useful archived explanation of the SmartLink workflow for the FLEX-6000 generation. The manufacturer still links this guide, but its screenshots and licensing steps belong to an older SmartSDR version, so use it with the current documentation for the radio and software you actually run.","canonicalUrl":"https://www.flexradio.com/documentation/smartlink-quick-start-guide-for-smartsdr-pdf/","topics":["remote-control","sdr-discovery"],"tags":["FlexRadio","SmartLink","SmartSDR","FLEX-6000","remote station","archive"],"kind":"Manual","maturity":"Historical","level":"Beginner","sources":[{"label":"FlexRadio SmartLink guide page","url":"https://www.flexradio.com/documentation/smartlink-quick-start-guide-for-smartsdr-pdf/","type":"Manufacturer","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."},{"label":"SmartLink quick-start PDF v1.4","url":"https://edge.flexradio.com/www/uploads/20200818184955/SmartLink-Quick-Start-Guide-for-SmartSDR.pdf","type":"Manufacturer","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."}],"body":[],"caveats":["The linked guide covers older SmartSDR setup; it is not a current purchasing or licensing guide.","Remote operation needs a configured station and working Internet connections.","No remote connection or radio control was exercised in this research."],"reactions":[],"media":null,"attachments":[{"label":"SmartLink quick-start v1.4 (PDF)","url":"https://edge.flexradio.com/www/uploads/20200818184955/SmartLink-Quick-Start-Guide-for-SmartSDR.pdf","hosted":false,"license":"Original source; no mirrored copy"},{"label":"Radcom signal observation worksheet (TXT, v2)","url":"/hot-topics-downloads/signal-observation.txt","hosted":true,"license":"Radcom original · CC BY 4.0"}],"checkedAt":"2026-10-27T00:18:03.810Z","sourcePublishedAt":null,"status":"published","revision":2,"createdAt":"2026-10-27T00:44:49.110Z","updatedAt":"2026-10-27T02:11:59.359Z"},{"id":"flex-smartsdr-4316-release-notes","title":"SmartSDR 4.3.16: dated release notes and upgrade caveats","summary":"FlexRadio's October 13, 2026 release notes describe SmartSDR 4.3.16 as an Early Access release for Aurora, FLEX-8000, FLEX-6000 and Maestro. CW profiles and revised PTT behaviour are practical changes to review before updating. Feature availability depends on the model and license; this record describes the dated release, not a newly verified change in licensing.","canonicalUrl":"https://www.flexradio.com/software/smartsdr-v4-3-16/","topics":["hf-digital","cw-morse","remote-control","sdr-discovery"],"tags":["FlexRadio","SmartSDR","4.3.16","Early Access","CW","firmware","upgrade"],"kind":"News","maturity":"Experimental","level":"Intermediate","sources":[{"label":"FlexRadio — SmartSDR 4.3.16 download page","url":"https://www.flexradio.com/software/smartsdr-v4-3-16/","type":"Manufacturer","checkedAt":"2026-10-30T12:00:13.000Z","note":"Version-specific installers and original release-note links; x64/arm64 distinction."},{"label":"FlexRadio — SmartSDR 4.3.16 release notes","url":"https://edge.flexradio.com/www/offload/20261012095049/SmartSDR-v4.3.16-Release-Notes.pdf","type":"Manufacturer","checkedAt":"2026-10-30T12:00:13.000Z","note":"Document gives October 13, 2026 release date, Early Access designation, feature matrix and upgrade warnings."}],"body":[{"heading":"Plan the update before leaving the station","text":"The notes recommend exporting profiles and flag extra driver-removal steps for installations at 4.1.5 or earlier. They also warn that upgrading deletes Maestro/M DVK function-key memories. Read the complete instructions for your starting version and hardware."},{"heading":"Review controls after upgrading","text":"CW profiles collect keyer and related settings. Hardware PTT now uses the selected audio source by default; the optional override restores the earlier analogue-microphone behaviour. Confirm the intended source before transmitting. Choose the Windows installer matching the computer's processor architecture."}],"caveats":["Early Access is the designation in the dated notes; no later feature-access transition is inferred.","No installation, RF test or performance comparison was conducted."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-30T12:00:13.000Z","sourcePublishedAt":"2026-10-13T00:00:00.000Z","status":"published","revision":1,"createdAt":"2026-10-30T12:01:08.495Z","updatedAt":"2026-10-30T12:01:08.495Z"},{"id":"fm-satellite-pass-etiquette","title":"Your first FM satellite contact: listen, keep it brief, share the pass","summary":"An FM satellite pass is a short shared opportunity, not a private repeater session. AMSAT’s operating guide emphasizes hearing the satellite, using full-duplex capability where possible and leaving room for other stations. A practical first goal is to follow the traffic and understand the exchange before joining it. Clear callsigns and considerate timing can matter more than trying to make the largest number of contacts.","canonicalUrl":"https://www.amsat.org/fm-satellites-good-operating-practices-for-beginning-and-experienced-operators/","topics":["space-radio","portable-field"],"tags":["satellites","FM","full duplex","operating","grid squares"],"kind":"Guide","maturity":"Reference","level":"Beginner","sources":[{"label":"AMSAT: FM satellite operating practices","url":"https://www.amsat.org/fm-satellites-good-operating-practices-for-beginning-and-experienced-operators/","type":"Official documentation","checkedAt":"2026-10-27T02:36:31.000Z","note":"Shared-pass etiquette, receiving your downlink, full duplex and concise exchanges."}],"body":[{"heading":"Listen before transmitting","text":"Establish that you can hear the satellite before attempting a contact. Hearing the downlink while transmitting helps reveal whether your signal is getting through or covering another caller. If repeated calls receive no response, pause and inspect the setup instead of occupying more of a limited pass."},{"heading":"Make room for other operators","text":"Let existing exchanges finish, use clear phonetics, and keep your own exchange concise. AMSAT discourages repeated contacts that block newcomers and asks operators to consider rare portable locations. You can gain useful experience by making one contact and listening to the remainder of the pass."}],"caveats":["This etiquette reference does not establish any satellite’s current operating status.","No satellite transmission or reception was attempted for this entry."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:36:31.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:50:18.071Z","updatedAt":"2026-10-27T02:50:18.071Z"},{"id":"freedv-241-maintenance-release","title":"FreeDV 2.4.1: audio, rig-control and integration fixes","summary":"FreeDV's October 31, 2026 announcement describes version 2.4.1 as a maintenance release addressing audio, rig-control and crash problems. Separate application and integration packages serve different station setups. This release is distinct from the continuing RADE V2 and FreeDV 3.0 beta work.","canonicalUrl":"https://freedv.org/freedv-2-4-1-released/","topics":["hf-digital","digital-voice","remote-control","sdr-discovery"],"tags":["FreeDV","2.4.1","RADE","FlexRadio","KA9Q","WebSDR","software update"],"kind":"News","maturity":"Stable","level":"Intermediate","sources":[{"label":"FreeDV — 2.4.1 release announcement","url":"https://freedv.org/freedv-2-4-1-released/","type":"Developer","checkedAt":"2026-11-03T13:04:43.000Z","note":"October 31, 2026 announcement; maintenance scope and platform choices."},{"label":"FreeDV application — v2.4.1 release notes","url":"https://github.com/freedv/freedv-gui/releases/tag/v2.4.1","type":"Developer","checkedAt":"2026-11-03T13:04:43.000Z","note":"Versioned application fixes including audio handling and receive muting until PTT-off confirmation."},{"label":"FreeDV integrations — v2.4.1 release notes","url":"https://github.com/freedv/freedv-integrations/releases/tag/v2.4.1","type":"Developer","checkedAt":"2026-11-03T13:04:43.000Z","note":"Integration-specific fixes, FlexRadio model/package distinctions and receive-only KA9Q/WebSDR client."},{"label":"FreeDV — November 2 development report","url":"https://freedv.org/mooneers-freeedv-update-october-2026/","type":"Developer","checkedAt":"2026-11-03T13:04:43.000Z","note":"Separates the released 2.4.1 maintenance work from upcoming 3.0 and subsequent experimental audio work."}],"body":[{"heading":"Choose the package for the station","text":"The integration notes distinguish PC or Raspberry Pi FlexRadio packages, supporting the 6000, 8000 and Aurora families, from the SmartSDR-uploaded container limited to 8000 and Aurora radios. The KA9Q/WebSDR client is receive-only. Match architecture and operating method before downloading."},{"heading":"Verify the behaviour you depend on","text":"Application notes describe keeping receive audio muted until the radio confirms PTT is off. Integration notes address connection handling and audio-buffer faults. After an update, check your own audio routing, radio control and return to receive; these developer fixes are not a guarantee for every station."}],"caveats":["No software was installed or station operated for this entry; fixes and compatibility are attributed to the developers.","The linked release pages supply original downloads. No binaries, manuals, audio samples or images are mirrored."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-11-03T13:04:43.000Z","sourcePublishedAt":"2026-10-31T00:00:00.000Z","status":"published","revision":1,"createdAt":"2026-11-03T13:04:44.157Z","updatedAt":"2026-11-03T13:04:44.157Z"},{"id":"freedv-rade-v2-beta","title":"FreeDV RADE V2: beta campaign and tuning caveats","summary":"FreeDV announced a RADE V2 test campaign using a beta of freedv-gui 3.0 for real-time push-to-talk tests over radio. This is a useful development to follow if you are curious about digital voice on HF and how it compares with SSB. The announcement describes a structured testing effort rather than a general-release recommendation. Its October update says the team already has enough testers. An October 30 developer report now adds campaign findings and unresolved tuning limitations; it does not announce a stable RADE V2 release.","canonicalUrl":"https://freedv.org/rade-v2-test-team/","topics":["hf-digital","digital-voice"],"tags":["FreeDV","RADE","digital voice","HF","beta"],"kind":"News","maturity":"Experimental","level":"Intermediate","sources":[{"label":"FreeDV RADE V2 Test Team","url":"https://freedv.org/rade-v2-test-team/","type":"Developer","checkedAt":"2026-11-03T13:04:43.000Z","note":"September 24 campaign announcement; October 2 recruitment closure remains present. Original operator comment retained."},{"label":"FreeDV — David's October 2026 beta report","url":"https://freedv.org/david-october-2026-v2-ptt-tests-and-improvements/","type":"Developer","checkedAt":"2026-11-03T13:04:43.000Z","note":"Published October 30; developer reports PTT beta results, tuning corner case and planned further testing."}],"body":[{"heading":"October 30 follow-up: check tuning and build status","text":"David Rowe reports that frequency offsets beyond about 32 Hz can cause an incorrect lock and garbled speech in the tested V2 beta. He describes corrective work targeted for further beta testing in mid-November; that target is not confirmation that a fix has shipped."},{"heading":"Keep the experimental boundary visible","text":"The report also describes retraining that could change compatibility with the beta waveform. Confirm the build and waveform used at both ends before an agreed test. These are developer findings from a limited campaign, not Radcom measurements or evidence of operator-wide consensus."}],"caveats":["Experimental beta work; do not label RADE V2 as a stable general release based on this announcement.","Recruitment was closed in the October 2 update; do not display a current 'join the test team' call to action.","Developer announcement and reader interest do not establish independent performance or hobby-wide popularity."],"reactions":[{"author":"Alexandros SV1RVP, comment on FreeDV's announcement","text":"Alexandros SV1RVP commented that he supports FreeDV in Greece and offered user-interface work and over-the-air testing. This shows an individual operator's interest, not a completed performance comparison.","url":"https://freedv.org/rade-v2-test-team/"}],"media":{"src":"/hot-topics-media/icom705.jpg","alt":"ICOM IC-705 (illustrative equipment photograph).","credit":"Batchman99 / Wikimedia Commons","license":"CC BY-SA 4.0","licenseUrl":"https://creativecommons.org/licenses/by-sa/4.0/","sourceUrl":"https://commons.wikimedia.org/wiki/File:ICOM_IC-705.jpg"},"attachments":[],"checkedAt":"2026-11-03T13:04:43.000Z","sourcePublishedAt":"2026-09-24T12:00:00.000Z","status":"published","revision":2,"createdAt":"2026-10-27T00:44:51.205Z","updatedAt":"2026-11-03T13:04:49.335Z"},{"id":"g5rv-louis-varney-history-design","title":"G5RV history: Louis Varney’s 1946 design and its matching section","summary":"Louis Varney, G5RV, developed the antenna bearing his callsign in 1946; its first RSGB Bulletin article appeared in July 1958. RSGB’s antenna reference and Varney’s own retrospective explain a design often reduced to a familiar wire length. The full-size G5RV combines a center-fed wire with a deliberately chosen transmission-line section. Understanding that section helps separate the original design from later variations and marketing shorthand.","canonicalUrl":"https://www.rsgbshop.org/acatalog/PDF/Successful_Wire%20Ant_sample.pdf","topics":["antennas-diy"],"tags":["G5RV","Louis Varney","antenna history","wire antennas","matching section"],"kind":"Guide","maturity":"Historical","level":"Intermediate","sources":[{"label":"RSGB Successful Wire Antennas sample","url":"https://www.rsgbshop.org/acatalog/PDF/Successful_Wire%20Ant_sample.pdf","type":"Official documentation","checkedAt":"2026-10-27T02:46:06.000Z","note":"RSGB 2012 publisher sample; verifies 1946 design and July 1958 publication."},{"label":"Varney retrospective in RSARS Mercury","url":"https://rsars.org.uk/wp-content/uploads/2013/10/mercury-51.pdf","type":"Official documentation","checkedAt":"2026-10-27T02:46:06.000Z","note":"Spring 1975 issue; author states summer 1946 origin."}],"body":[{"heading":"Follow the historical design","text":"The full-size design is commonly associated with a roughly 102-foot wire and an open-wire matching section, with particular attention to 20-meter operation. Later descriptions and practical versions changed feeder arrangements. Varney’s retrospective dates the invention to summer 1946 and distinguishes that origin from publication and subsequent explanatory articles."},{"heading":"Why the feed line matters","text":"The matching section is an electrical component, not simply a convenient drop from the antenna. Its electrical length depends on the line used. Changing that section, the remaining feeder or the operating band changes the impedance presented to the station. Multiband operation does not imply a universal 50-ohm match without matching equipment."}],"caveats":["Historical reference, not a complete construction plan. Published diagrams remain with their rights holders."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:46:06.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:49:45.994Z","updatedAt":"2026-10-27T02:49:45.994Z"},{"id":"gpredict-pass-planning","title":"Plan a satellite pass with Gpredict and current orbital elements","summary":"Gpredict displays satellite positions and predicts future passes for selected observer locations. Its developer documents maps, polar plots, pass detail and optional radio or rotator control. AMSAT-UK explains the orbital elements that tracking tools use. Together these references help turn a vague idea that a satellite is overhead into a plan for when to listen, where to aim and which settings to verify.","canonicalUrl":"https://oz9aec.dk/gpredict/features.php","topics":["space-radio","maps-tracking","remote-control"],"tags":["Gpredict","satellite tracking","Doppler","TLE","maps","rotator"],"kind":"Guide","maturity":"Reference","level":"Beginner","sources":[{"label":"Gpredict: features","url":"https://oz9aec.dk/gpredict/features.php","type":"Developer","checkedAt":"2026-10-27T02:36:31.000Z","note":"Pass prediction, observer modules, element updates and radio/rotator-control capability."},{"label":"AMSAT-UK: satellite tracking","url":"https://amsat-uk.org/beginners/satellite-tracking/","type":"Official documentation","checkedAt":"2026-10-27T02:36:31.000Z","note":"Keplerian elements, pass-prediction tools and Doppler-tuning references."}],"body":[{"heading":"Check location, time and orbit data","text":"Set the intended observing location and ensure the computer clock is correct. Refresh orbital elements and inspect the predicted pass rather than relying on an old screenshot. Note the pass times and direction changes, then compare them with the obstructions around your actual operating position."},{"heading":"Separate prediction from equipment control","text":"A plotted track does not prove the satellite is transmitting or that a radio/rotator is connected correctly. Start by following predictions while receiving. If you later enable equipment control, confirm supported interfaces and Doppler behavior with the specific radio and application documentation before relying on automation."}],"caveats":["Platform packages and hardware compatibility require separate checks; no installation or control connection was tested."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:36:31.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:50:21.073Z","updatedAt":"2026-10-27T02:50:21.073Z"},{"id":"hackrf-pro-release-and-support","title":"HackRF Pro: a shipped SDR platform with an important support note","summary":"Great Scott Gadgets reported on January 16, 2026 that its prepaid reseller preorders for HackRF Pro had shipped. The product page lists half-duplex transmission or reception across 100 kHz to 6 GHz, USB-C and compatibility with existing HackRF software. A later March support notice identifies a USB-C connector issue on some units. Read both the capabilities and that support history when considering the platform.","canonicalUrl":"https://greatscottgadgets.com/2026/01-16-hackrf-pro-shipping-update/","topics":["sdr-discovery","antennas-diy"],"tags":["HackRF Pro","Great Scott Gadgets","SDR","USB-C","RF experiments","product announcement"],"kind":"News","maturity":"Reference","level":"Advanced","sources":[{"label":"Great Scott Gadgets shipping update","url":"https://greatscottgadgets.com/2026/01-16-hackrf-pro-shipping-update/","type":"Manufacturer","checkedAt":"2026-10-27T02:40:23.000Z","note":"January 16, 2026 reseller-preorder shipment statement."},{"label":"Great Scott Gadgets HackRF Pro product page","url":"https://greatscottgadgets.com/hackrf/pro/","type":"Manufacturer","checkedAt":"2026-10-27T02:40:23.000Z","note":"Coverage, half-duplex operation, USB-C, compatibility and accessories."},{"label":"Great Scott Gadgets USB-C support notice","url":"https://greatscottgadgets.com/2026/03-15-self-repair-guide-for-hackrf-pro-usb-c-connector/","type":"Manufacturer","checkedAt":"2026-10-27T02:40:23.000Z","note":"March 15, 2026 connector-contact issue affecting some units."}],"body":[{"heading":"Match the tool to the experiment","text":"HackRF Pro is a programmable RF peripheral for test and development, not an automatic replacement for a purpose-built communications receiver. Choose a lawful receive or controlled laboratory task, suitable software and appropriate accessories before judging whether its wide coverage is useful for your project."},{"heading":"Read support history before buying","text":"The manufacturer’s March notice describes a connector-contact problem affecting some units and publishes guidance. Check the applicable support route and hardware condition rather than assuming every unit is affected or that a launch announcement proves fault-free operation. No repair was attempted here."}],"caveats":["The shipping statement describes January 2026 reseller orders, not today’s stock.","No bench test was performed; transmit capability does not itself grant operating permission."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:40:23.000Z","sourcePublishedAt":"2026-01-16T00:00:00.000Z","status":"published","revision":1,"createdAt":"2026-10-27T02:48:48.141Z","updatedAt":"2026-10-27T02:48:48.141Z"},{"id":"heltec-mesh-node-t096","title":"Heltec Mesh Node T096: a small board for mesh and location projects","summary":"Heltec's Mesh Node T096 puts an nRF52840 controller, an SX1262 LoRa radio and UC6580 satellite positioning on one development board. The manufacturer lists Meshtastic and MeshCore compatibility, Bluetooth and battery-management features. For a builder, the appeal is combining communications and location hardware in a compact starting point. Treat it as a board that needs a complete deployment plan, including suitable firmware, power, enclosure and antenna arrangements.","canonicalUrl":"https://heltec.org/project/t096/","topics":["mesh-radio","maps-tracking","antennas-diy","portable-field"],"tags":["Heltec","T096","nRF52840","GNSS","Meshtastic","MeshCore","Product guide"],"kind":"Guide","maturity":"Reference","level":"Intermediate","sources":[{"label":"Heltec T096 product and specification","url":"https://heltec.org/project/t096/","type":"Manufacturer","checkedAt":"2026-10-27T02:36:30.000Z","note":"Confirms named chips, interfaces and intended firmware ecosystems; performance language remains a manufacturer claim."},{"label":"Heltec T096 documentation","url":"https://wiki.heltec.org/docs/devices/open-source-hardware/nrf52840-series/t096/","type":"Manufacturer","checkedAt":"2026-10-27T02:36:30.000Z","note":"Confirms nRF52840 and GNSS; generic Wi-Fi bullet conflicts with other descriptions and is not repeated."}],"body":[{"heading":"Compare the complete node","text":"The product page identifies USB-C power, a lithium-battery connector, a solar connector and antenna connections. Check the actual package contents and board revision before buying accessories. A connection labeled solar is not a promise that an arbitrary panel is compatible; use the manufacturer's electrical specifications for the exact hardware."},{"heading":"Choose the intended network","text":"Manufacturer support for two firmware ecosystems does not mean two differently configured groups automatically communicate. Identify the firmware target and intended group first. For location use, verify a genuine outdoor position fix before evaluating reports received elsewhere. Published transmitter capability also does not establish the power allowed in your region."}],"caveats":["No release date, battery endurance or independent range result was established.","The documentation has inconsistent Wi-Fi wording; this entry relies only on the consistently documented Bluetooth, LoRa and GNSS functions."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:36:30.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:50:42.414Z","updatedAt":"2026-10-27T02:50:42.414Z"},{"id":"icom-ic7110-announcement","title":"Icom's IC-7110 announcement connects D-STAR, HF and digital modes","summary":"Icom's Ham Fair 2026 announcement presents the IC-7110 as an all-mode radio spanning HF and higher amateur bands. Its listed features include D-STAR, a spectrum scope and waterfall, a CW decoder and simplified FT8 configuration. The announcement shows how traditional operating, digital voice and software-assisted modes can meet in one station concept, while leaving delivery and final specification checks to later product updates.","canonicalUrl":"https://www.icomjapan.com/news/4741/","topics":["digital-voice","hf-digital","cw-morse","sdr-discovery"],"tags":["Icom","IC-7110","D-STAR","FT8","CW","transceiver"],"kind":"News","maturity":"Experimental","level":"Intermediate","sources":[{"label":"Icom IC-7110 announcement","url":"https://www.icomjapan.com/news/4741/","type":"Manufacturer","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."}],"body":[],"caveats":["This source is a pre-release announcement, not an availability or shipping confirmation.","Features are manufacturer statements; no independent performance test was reviewed.","Band coverage can differ by regional version."],"reactions":[],"media":null,"attachments":[{"label":"Radcom signal observation worksheet (TXT, v2)","url":"/hot-topics-downloads/signal-observation.txt","hosted":true,"license":"Radcom original · CC BY 4.0"}],"checkedAt":"2026-10-27T00:18:03.810Z","sourcePublishedAt":"2026-09-04T12:00:00.000Z","status":"published","revision":2,"createdAt":"2026-10-27T00:44:50.997Z","updatedAt":"2026-10-27T02:11:14.321Z"},{"id":"icom-id5200a-dstar-aprs-reference","title":"Icom ID-5200A: D-STAR features and the APRS firmware boundary","summary":"Icom listed the ID-5200A in its August 21, 2026 news index. Its product documentation describes a VHF/UHF D-STAR mobile with dual DV reception, a colour touchscreen and Wi-Fi connectivity. This is an established product reference; the announcement date is not evidence of stock or a new November launch.","canonicalUrl":"https://www.icomjapan.com/lineup/products/ID-5200A/","topics":["digital-voice","maps-tracking","remote-control"],"tags":["Icom","ID-5200A","D-STAR","APRS","KISS TNC","firmware","mobile radio"],"kind":"Guide","maturity":"Reference","level":"Intermediate","sources":[{"label":"Icom — ID-5200A product documentation","url":"https://www.icomjapan.com/lineup/products/ID-5200A/","type":"Manufacturer","checkedAt":"2026-11-06T13:03:17.000Z","note":"Documented D-STAR capabilities; distinguishes PC APRS via KISS TNC from future built-in APRS support."},{"label":"Icom — dated news index","url":"https://www.icomjapan.com/news/","type":"Manufacturer","checkedAt":"2026-11-06T13:03:17.000Z","note":"August 21, 2026 product announcement listing; not a shipping date."},{"label":"Icom — ID-5200A/E firmware 1.10","url":"https://www.icomjapan.com/support/firmware_driver/4752/","type":"Manufacturer","checkedAt":"2026-11-06T13:03:17.000Z","note":"September 18, 2026 update notes cover online updating, DV monitoring and KISS packet fixes; backup precautions."}],"body":[{"heading":"Separate current packet support from planned features","text":"Icom says the built-in KISS-mode TNC supports APRS operation from a PC from the first production run. The same page labels built-in APRS support as a future firmware feature. Do not treat those two operating paths as interchangeable."},{"heading":"Match firmware and network requirements","text":"Firmware 1.10's September 18 notes describe fixes for DV repeater-monitor audio and KISS-mode packet transmission. Follow the manufacturer's backup guidance before updating. D-STAR Terminal and Access Point modes use an internet connection; Icom does not guarantee reception of every call."}],"caveats":["Manufacturer descriptions and fixes are not independent Radcom tests. No radio was operated or firmware installed.","Check the exact regional model, firmware and original manuals. Future-feature wording is not a release commitment."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-11-06T13:03:17.000Z","sourcePublishedAt":"2026-08-21T00:00:00.000Z","status":"published","revision":1,"createdAt":"2026-11-06T13:03:17.968Z","updatedAt":"2026-11-06T13:03:17.968Z"},{"id":"js8call-keyboard-hf","title":"JS8Call: put a keyboard conversation on HF","summary":"JS8Call's project site describes keyboard messaging over HF, with directed messages, relaying, store-and-forward features, and station discovery. Its current site presents JS8Call-Improved as a community-developed continuation and links to downloads and discussion. It is a natural next resource for operators who enjoy weak-signal modes and want to exchange more conversational text. Use the project documentation to distinguish which functions are enabled and supported in your selected build.","canonicalUrl":"https://js8call.com/","topics":["hf-digital","portable-field"],"tags":["JS8","JS8Call","HF","text messaging","store and forward","off-grid"],"kind":"Project","maturity":"Reference","level":"Intermediate","sources":[{"label":"JS8Call project","url":"https://js8call.com/","type":"Developer","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."}],"body":[],"caveats":["The project's range, sensitivity, and interoperability descriptions are developer claims; they were not field-tested here.","HF propagation and available stations determine whether a message can travel; do not promise delivery or emergency-service reliability.","The site advertises a July 12, 2026 release; this entry avoids claiming it is the newest build without checking its release repository."],"reactions":[],"media":{"src":"/hot-topics-media/icom705.jpg","alt":"ICOM IC-705 (illustrative equipment photograph).","credit":"Batchman99 / Wikimedia Commons","license":"CC BY-SA 4.0","licenseUrl":"https://creativecommons.org/licenses/by-sa/4.0/","sourceUrl":"https://commons.wikimedia.org/wiki/File:ICOM_IC-705.jpg"},"attachments":[{"label":"Radcom field-session checklist (TXT, v2)","url":"/hot-topics-downloads/field-checklist.txt","hosted":true,"license":"Radcom original · CC BY 4.0"}],"checkedAt":"2026-10-27T00:18:03.810Z","sourcePublishedAt":null,"status":"published","revision":2,"createdAt":"2026-10-27T00:44:48.692Z","updatedAt":"2026-10-27T02:12:05.130Z"},{"id":"kenwood-thd75-dstar-aprs-paths","title":"Kenwood TH-D75: D-STAR, APRS and a separate gateway workflow","summary":"Kenwood’s TH-D75A/E manual brings together D-STAR voice, APRS and computer-connected packet functions. It also documents DV Gateway mode, which uses a Windows or Android device with a third-party application over USB or Bluetooth for an internet D-STAR path. That gateway arrangement is distinct from ordinary repeater operation. This is an established-radio reference grounded in the manual, not an announcement of a new model.","canonicalUrl":"https://kasc.kenwood.com/files/prod/3692/5/THD75E_User_manuals_English.pdf","topics":["digital-voice","maps-tracking","portable-field"],"tags":["Kenwood","TH-D75","D-STAR","APRS","Bluetooth","KISS","product spotlight"],"kind":"Guide","maturity":"Reference","level":"Intermediate","sources":[{"label":"Kenwood TH-D75A/E official user manual","url":"https://kasc.kenwood.com/files/prod/3692/5/THD75E_User_manuals_English.pdf","type":"Manufacturer","checkedAt":"2026-10-27T02:40:23.000Z","note":"APRS/packet sections, USB/Bluetooth interface limits and DV Gateway mode on manual pages 12-12 and 16-13."}],"body":[{"heading":"Choose one workflow first","text":"Start with the job: local voice, an APRS position/message workflow, or a D-STAR internet gateway. Read the corresponding manual section and its interface settings. The presence of Bluetooth does not mean every connected device or operating mode can use the same connection simultaneously."},{"heading":"Check companion software","text":"Kenwood says it does not supply the third-party application used for DV Gateway communication. Verify that application’s platform and registration requirements separately. Review location settings before enabling automatic position transmission, particularly when the radio is used around home or other private places."}],"caveats":["The manufacturer’s main product site was under maintenance; the official support-hosted manual was accessible.","No gateway, Bluetooth pairing or APRS transmission was tested."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:40:23.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:48:51.161Z","updatedAt":"2026-10-27T02:48:51.161Z"},{"id":"krakensdr-bearing-basics","title":"Direction finding needs bearings, an antenna array and a map","summary":"KrakenRF explains how a coherent SDR compares signals from an antenna array to estimate a transmitter's direction. Its overview separates the radio receiver and signal-processing hardware from the mapping application that plots bearings. It also lists the supporting equipment for a KrakenSDR setup, making the page a useful starting point for understanding why a phone map alone cannot perform radio direction finding.","canonicalUrl":"https://www.krakenrf.com/about-krakensdr","topics":["maps-tracking","sdr-discovery","antennas-diy"],"tags":["KrakenSDR","RDF","direction finding","coherent SDR","antenna array","fox hunting"],"kind":"Guide","maturity":"Reference","level":"Beginner","sources":[{"label":"KrakenRF technical overview","url":"https://www.krakenrf.com/about-krakensdr","type":"Manufacturer","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."}],"body":[],"caveats":["This is manufacturer documentation, not an independent accuracy test.","A bearing is a direction estimate; locating a transmitter requires additional observations and suitable geometry.","The manufacturer's cloud mapper is labeled alpha on the checked page."],"reactions":[],"media":null,"attachments":[{"label":"Radcom signal observation worksheet (TXT, v2)","url":"/hot-topics-downloads/signal-observation.txt","hosted":true,"license":"Radcom original · CC BY 4.0"}],"checkedAt":"2026-10-27T00:18:03.810Z","sourcePublishedAt":null,"status":"published","revision":2,"createdAt":"2026-10-27T00:44:49.955Z","updatedAt":"2026-10-27T02:11:49.025Z"},{"id":"lance-atak-over-mesh","title":"ATAK over LoRa: where LANCE fits","summary":"LANCE describes an ATAK plugin that connects directly to a Meshtastic or MeshCore radio and carries positions and other map objects over LoRa. It offers a practical example of mapping software meeting low-bandwidth radio links. Its documentation distinguishes Bluetooth and USB options and explains that a team must select one radio protocol for peers to exchange data over the air.","canonicalUrl":"https://lanceplugin.com/features-atak-over-mesh","topics":["maps-tracking","mesh-radio","portable-field"],"tags":["ATAK","LANCE","Meshtastic","MeshCore","LoRa","mapping"],"kind":"Project","maturity":"Experimental","level":"Intermediate","sources":[{"label":"LANCE ATAK-over-mesh documentation","url":"https://lanceplugin.com/features-atak-over-mesh","type":"Developer","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."}],"body":[],"caveats":["Meshtastic and MeshCore do not become one interoperable over-the-air mesh through this plugin.","These are developer-documented capabilities; this library has not performed a hardware field test.","The developer says USB hardware validation is ongoing and some connection options depend on edition.","The plugin can change radio configuration; read its setup behavior before using an established node."],"reactions":[],"media":null,"attachments":[{"label":"Radcom field-session checklist (TXT, v2)","url":"/hot-topics-downloads/field-checklist.txt","hosted":true,"license":"Radcom original · CC BY 4.0"}],"checkedAt":"2026-10-27T00:18:03.810Z","sourcePublishedAt":null,"status":"published","revision":2,"createdAt":"2026-10-27T00:44:50.365Z","updatedAt":"2026-10-27T02:11:21.623Z"},{"id":"lcwo-browser-cw","title":"Build a daily Morse habit with LCWO","summary":"Learn CW Online offers a browser-based Koch course plus callsign, word, plain-text, and code-group practice. The service also lists downloadable MP3 exercises and a text-to-CW tool. An account can keep practice settings and track progress, making it a useful companion to time spent listening on the bands. Begin with a manageable routine and choose exercises that match the kind of operating you want to do.","canonicalUrl":"https://lcwo.net/","topics":["cw-morse"],"tags":["CW","Morse","Koch","training","browser","audio"],"kind":"Guide","maturity":"Reference","level":"Beginner","sources":[{"label":"Learn CW Online","url":"https://lcwo.net/","type":"Developer","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."}],"body":[],"caveats":["An account is needed for saved personal progress; the text-to-CW tool is listed as usable without login.","This entry verifies advertised features, not a completed training session or learning outcome."],"reactions":[],"media":{"src":"/hot-topics-media/morse-key.jpg","alt":"Wooden-based Morse key (illustrative equipment photograph).","credit":"Lauren.mcalary / Wikimedia Commons","license":"CC BY-SA 4.0","licenseUrl":"https://creativecommons.org/licenses/by-sa/4.0/","sourceUrl":"https://commons.wikimedia.org/wiki/File:Morse_Key.jpg"},"attachments":[],"checkedAt":"2026-10-27T00:18:03.810Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T00:44:48.048Z","updatedAt":"2026-10-27T00:44:48.048Z"},{"id":"mat-80-tuner-family-preview","title":"mAT-80 tuner family: announced variants and remaining questions","summary":"The mAT-80 manufacturer page previews a family of automatic antenna tuners rather than documenting a universally shipping product. It marks the mAT-80R remote version and mAT-80M Icom version as coming soon, with a Yaesu version planned. The stated coverage is 1.8–54 MHz. This is a product-watch entry for operators evaluating a future tuner location, control connection and operating duty cycle.","canonicalUrl":"https://www.mat-tuner.com/mAT-80.php","topics":["antennas-diy","remote-control"],"tags":["mAT-TUNER","mAT-80","automatic tuner","product preview","remote tuner"],"kind":"News","maturity":"Experimental","level":"Intermediate","sources":[{"label":"mAT-80 manufacturer preview","url":"https://www.mat-tuner.com/mAT-80.php","type":"Manufacturer","checkedAt":"2026-10-27T02:46:06.000Z","note":"Coming-soon and planned labels checked."}],"body":[{"heading":"Follow the variant, not just the family","text":"The remote version is described as carrying RF and DC along the coax through a bias-tee arrangement. Radio-specific versions use different control approaches. Identify the exact model and supported radio before planning cables or automation; a family announcement does not establish that all variants share the same interface or release schedule."},{"heading":"Read mode ratings carefully","text":"The page distinguishes 200 watts for SSB from 100 watts for FT8, RTTY and FM. Keep operating mode and sustained duty cycle in the comparison. An advertised impedance range describes matching capability under stated conditions; it does not guarantee efficient radiation or successful matching for every wire and installation."}],"caveats":["Preview only: no firm release date verified. Specifications and availability may change."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:46:06.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:49:24.092Z","updatedAt":"2026-10-27T02:49:24.092Z"},{"id":"mat-sw600-hf-power-swr-meter","title":"mAT-SW600: an HF power and SWR meter with a charging caveat","summary":"The mAT-SW600 is an inline HF power and SWR meter that the manufacturer labels as a new arrival, without a dated launch notice on the checked page. Its listed range is 1.8–30 MHz, with automatic power ranges and a color display. This is a useful accessory reference for monitoring a station, provided its role is kept separate from antenna impedance analysis or receiver protection.","canonicalUrl":"https://www.mat-tuner.com/mAT-SW600.php","topics":["antennas-diy","hf-digital"],"tags":["mAT-TUNER","mAT-SW600","SWR meter","wattmeter","station accessories"],"kind":"Guide","maturity":"Reference","level":"Intermediate","sources":[{"label":"mAT-SW600 manufacturer specifications","url":"https://www.mat-tuner.com/mAT-SW600.php","type":"Manufacturer","checkedAt":"2026-10-27T02:46:06.000Z","note":"Includes explicit charging restriction."}],"body":[{"heading":"Use the display for the right question","text":"Forward-power and SWR readings help observe what happens as the station changes frequency or operating conditions. They do not identify every source of feed-line loss or explain the full antenna impedance. Follow the specified connection direction and limits, and interpret readings in the context of the meter’s position in the system."},{"heading":"Plan charging outside operating time","text":"The meter uses rechargeable cells and USB-C charging. The manufacturer specifically says it should not operate while charging because RF can affect the charging circuit. Make that restriction part of the station checklist, particularly when the display will be used during long sessions or installed among permanently connected accessories."}],"caveats":["No dated release verified. Accuracy claims are manufacturer specifications, not independent test results."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:46:06.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:49:27.058Z","updatedAt":"2026-10-27T02:49:27.058Z"},{"id":"meshcore-companion-repeat","title":"A temporary relay for a MeshCore field group","summary":"Seeed Studio describes using Companion Repeat Mode on three Wio Tracker L1 Pro devices during a field test. A middle device forwarded messages while retaining Companion firmware. Moving that relay to a higher, more open location improved message delivery in the reported test. The practical lesson is to plan matching radio settings and relay placement before heading beyond existing coverage.","canonicalUrl":"https://blog.meshcore.io/2026/10/23/repeat-mode-tracker-l1-pro","topics":["mesh-radio","portable-field"],"tags":["MeshCore","Wio Tracker L1 Pro","relay","off-grid","field test"],"kind":"Field report","maturity":"Reference","level":"Beginner","sources":[{"label":"MeshCore Blog / Seeed Studio","url":"https://blog.meshcore.io/2026/10/23/repeat-mode-tracker-l1-pro","type":"Manufacturer","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."}],"body":[],"caveats":["The article is a manufacturer-authored demonstration, not an independent review.","Repeat Mode is limited to supported off-grid configurations; it is not a blanket setting for every public mesh.","A mobile battery-powered relay is not a replacement for fixed repeater infrastructure."],"reactions":[],"media":{"src":"/hot-topics-media/wio-l1-pro-rooftop.jpg","alt":"Wio Tracker L1 Pro running mesh firmware on the DB0IL radio-site roof (illustrative photograph).","credit":"Fabian Horst / Wikimedia Commons","license":"CC BY 4.0","licenseUrl":"https://creativecommons.org/licenses/by/4.0/","sourceUrl":"https://commons.wikimedia.org/wiki/File:2026-03-15-Wio-Tracker-L1-Pro-MeshCore-at-DB0IL-0.jpg"},"attachments":[{"label":"Radcom field-session checklist (TXT, v2)","url":"/hot-topics-downloads/field-checklist.txt","hosted":true,"license":"Radcom original · CC BY 4.0"}],"checkedAt":"2026-10-27T00:18:03.810Z","sourcePublishedAt":"2026-10-23T12:00:00.000Z","status":"published","revision":2,"createdAt":"2026-10-27T00:44:51.623Z","updatedAt":"2026-10-27T02:11:07.692Z"},{"id":"meshcore-ripple-ui-123-maps","title":"Ripple UI 12.3: map downloads and device-specific compass support","summary":"MeshCore firmware developer Scott Powell's November 3, 2026 announcement describes Ripple UI 12.3, including Wi-Fi map downloads, additional device support and crash fixes. It also begins retiring the older Ripple network profile type. This is a firmware announcement, not a new hardware launch.","canonicalUrl":"https://blog.meshcore.io/2026/11/03/ripple-12.3","topics":["mesh-radio","maps-tracking","portable-field"],"tags":["MeshCore","Ripple UI","12.3","maps","Wio Tracker L2 Pro","MeshPager X2","firmware"],"kind":"News","maturity":"Reference","level":"Intermediate","sources":[{"label":"MeshCore — Ripple UI v12.3","url":"https://blog.meshcore.io/2026/11/03/ripple-12.3","type":"Developer","checkedAt":"2026-11-05T13:03:57.000Z","note":"November 3 developer release announcement; map-download limits, device support and profile deprecation."}],"body":[{"heading":"Prepare maps before leaving connectivity","text":"Tiles download as you pan or zoom and are saved to the SD card; bulk downloading is not supported. On ePaper devices, downloads work with the colour tile-set option. Check that the needed area is saved before an outing."},{"heading":"Match features to hardware and profiles","text":"The announcement adds MeshPager X2 and Wio Tracker L2 Pro support. A stationary direction arrow requires a supported digital compass and calibration. Version 12.3 still loads existing Ripple profiles but prevents creating new ones; removal of remaining support is planned for later versions."}],"caveats":["No firmware was installed or radio tested. Developer crash-fix claims do not establish independent reliability.","Verify the exact device and firmware before updating; announced support does not establish hardware stock or delivery."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-11-05T13:03:57.000Z","sourcePublishedAt":"2026-11-03T00:00:00.000Z","status":"published","revision":1,"createdAt":"2026-11-05T13:04:18.317Z","updatedAt":"2026-11-05T13:04:18.317Z"},{"id":"meshtastic-28-alpha","title":"Meshtastic 2.8: what changes before you upgrade","summary":"Meshtastic's 2.8 announcement introduces packet signing, location-privacy changes and support for larger networks. It also explains why the first 2.8.0 build was revoked and replaced by 2.8.1. The project explicitly describes 2.8.1 as alpha software for testing, with configuration and identity changes that matter when upgrading an existing mesh. Read the migration notes before changing an established station.","canonicalUrl":"https://meshtastic.org/blog/lets-talk-about-2-8/","topics":["mesh-radio","maps-tracking","portable-field"],"tags":["Meshtastic","LoRa","firmware","2.8","packet signing","privacy"],"kind":"News","maturity":"Experimental","level":"Intermediate","sources":[{"label":"Meshtastic release explanation","url":"https://meshtastic.org/blog/lets-talk-about-2-8/","type":"Official documentation","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."},{"label":"YYCMesh field report","url":"https://yycmesh.com/blog/500khz-field-report","type":"Operator report","checkedAt":"2026-10-27T00:18:03.810Z","note":"An individual community report."}],"body":[],"caveats":["This is an alpha announcement, not a recommendation to upgrade a working field station.","The project's notice says 2.8.0 is revoked; do not present it as a current download.","Release status must be checked again when this entry is updated."],"reactions":[{"author":"YYCMesh, a Calgary community network","text":"YYCMesh reports useful operation with a 500 kHz configuration after broader infrastructure and antenna improvements. The authors describe observational evidence and do not isolate bandwidth as the cause of improved performance.","url":"https://yycmesh.com/blog/500khz-field-report"}],"media":{"src":"/hot-topics-media/meshtastic-solar-node.jpg","alt":"Components of a solar-powered Meshtastic node at temporärhaus (illustrative photograph).","credit":"-stk / Wikimedia Commons","license":"CC BY-SA 4.0","licenseUrl":"https://creativecommons.org/licenses/by-sa/4.0/","sourceUrl":"https://commons.wikimedia.org/wiki/File:2025-10_Meshtastic_Node_temporaerhaus_P1090099.jpg"},"attachments":[{"label":"Radcom field-session checklist (TXT, v2)","url":"/hot-topics-downloads/field-checklist.txt","hosted":true,"license":"Radcom original · CC BY 4.0"}],"checkedAt":"2026-10-27T00:18:03.810Z","sourcePublishedAt":"2026-10-08T12:00:00.000Z","status":"published","revision":2,"createdAt":"2026-10-27T00:44:51.416Z","updatedAt":"2026-10-27T02:11:11.477Z"},{"id":"meshtastic-android-284-open-beta","title":"Meshtastic Android 2.8.4 open beta: map and connection changes","summary":"The Meshtastic Android project's October 31, 2026 pre-release, v2.8.4-open.1, adds AR mesh views, a radio-connection Quick Settings tile and a Node Tracker widget. Its notes also describe fixes for USB recognition and app database recovery. These are client-application changes; the version number does not identify the firmware running on a radio node.","canonicalUrl":"https://github.com/meshtastic/Meshtastic-Android/releases/tag/v2.8.4-open.1","topics":["mesh-radio","maps-tracking"],"tags":["Meshtastic","Android","open beta","2.8.4","maps","USB","app"],"kind":"News","maturity":"Experimental","level":"Intermediate","sources":[{"label":"Meshtastic Android — v2.8.4-open.1","url":"https://github.com/meshtastic/Meshtastic-Android/releases/tag/v2.8.4-open.1","type":"Developer","checkedAt":"2026-11-02T13:01:39.000Z","note":"October 31 pre-release notes; app features and fixes, not a firmware release."}],"body":[{"heading":"Check the feature requirements","text":"The notes limit device-model placement in AR to the Google build variant. Do not assume every build or phone supports every listed display feature. Confirm the app build and connected node's firmware separately when troubleshooting."},{"heading":"Test before relying on it in the field","text":"Treat this as beta software. Verify connection, messaging and map behaviour on your own setup before a planned outing. Developer fix descriptions are not an independent reliability test or proof that a particular user's fault is resolved."}],"caveats":["No app was installed or radio operated for this entry.","The separate rolling snapshot is a debug build; it is not this versioned open-beta release."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-11-02T13:01:39.000Z","sourcePublishedAt":"2026-10-31T00:00:00.000Z","status":"published","revision":1,"createdAt":"2026-11-02T13:02:14.508Z","updatedAt":"2026-11-02T13:02:14.508Z"},{"id":"meshtastic-environment-telemetry","title":"Meshtastic telemetry: what your node can measure, and what needs a sensor","summary":"Meshtastic can carry more than messages. Its documentation separates device information, such as battery and airtime, from environmental readings supplied by attached sensors. Temperature, humidity and pressure require appropriate hardware; enabling a menu cannot create a missing measurement. The supported-sensor list is the starting point for a field weather node or battery monitor, followed by checking the board's connections and the firmware and app versions actually in use.","canonicalUrl":"https://meshtastic.org/docs/configuration/module/telemetry/","topics":["mesh-radio","antennas-diy","portable-field"],"tags":["Meshtastic","telemetry","sensors","BME280","battery","temperature","humidity"],"kind":"Guide","maturity":"Reference","level":"Intermediate","sources":[{"label":"Meshtastic Telemetry Module Configuration","url":"https://meshtastic.org/docs/configuration/module/telemetry/","type":"Official documentation","checkedAt":"2026-10-27T02:36:30.000Z","note":"Distinguishes device/environment measurements, supported sensors and enable settings."},{"label":"Meshtastic Android Telemetry & Sensors","url":"https://meshtastic.org/docs/software/android/user/telemetry-and-sensors/","type":"Official documentation","checkedAt":"2026-10-27T02:36:30.000Z","note":"Explains telemetry display, empty rows and reporting behavior."}],"body":[{"heading":"Build one measurement at a time","text":"The official table lists a BME280 for temperature, humidity and pressure, and INA-family devices for voltage or current measurements. Our suggested workflow is to verify one supported sensor locally before sending its readings over the mesh. Keep the measurement units and observation time with the result, especially when comparing two locations."},{"heading":"Read an empty display carefully","text":"The Android guide explains that a telemetry row fills after that category of data arrives. An empty row is therefore not proof that a sensor is absent. Check whether the relevant telemetry group is enabled and whether any report arrived. Use an update interval suited to the task rather than generating needless traffic."}],"caveats":["Sensor support and controls vary with firmware, board and client versions.","No sensor accuracy, calibration or life-safety suitability was tested. Environmental displays are not a substitute for certified warning equipment."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:36:30.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:50:49.645Z","updatedAt":"2026-10-27T02:50:49.645Z"},{"id":"meshtastic-find-local-mesh","title":"Meshtastic: why a connected node may hear no local mesh","summary":"A phone connection proves that the app can reach your node, not that the node can reach other radios. Meshtastic's October 12, 2026 guide explains how mismatched LoRa presets and frequency settings can leave a working node silent. It also distinguishes stored node names from recent reception and explains the limits of public-mesh discovery.","canonicalUrl":"https://meshtastic.org/blog/finding-your-local-mesh/","topics":["mesh-radio","portable-field"],"tags":["Meshtastic","LoRa","discovery","presets","troubleshooting","node list"],"kind":"Guide","maturity":"Reference","level":"Beginner","sources":[{"label":"Meshtastic — Why your new node might not see your local mesh","url":"https://meshtastic.org/blog/finding-your-local-mesh/","type":"Developer","checkedAt":"2026-10-29T12:03:49.419Z","note":"October 12, 2026 guide: preset/frequency matching, stored node history, public discovery limits and recipient acknowledgments."}],"body":[{"heading":"Compare settings before replacing hardware","text":"Confirm your region and compare the modem preset and frequency slot with the local group's settings. A node list can retain devices heard before a configuration change; inspect last-heard information rather than treating every saved name as reachable."},{"heading":"Know what a successful check means","text":"The guide describes discovery scans of default public channels; custom channel settings can remain invisible. An empty result does not establish that no local mesh exists. For a consenting contact, a direct-message recipient acknowledgment is stronger evidence of delivery than a channel message merely being repeated nearby."}],"caveats":["Client and firmware support vary. This guide does not rule out antenna, power or hardware faults.","No scan or radio contact was performed."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-29T12:03:49.419Z","sourcePublishedAt":"2026-10-12T00:00:00.000Z","status":"published","revision":1,"createdAt":"2026-10-29T12:04:06.573Z","updatedAt":"2026-10-29T12:04:06.573Z"},{"id":"meshtastic-sdr-reception-project","title":"Study your mesh signals with an SDR receiver","summary":"The meshtastic-sniffer project documents passive reception of Meshtastic LoRa traffic using supported SDR hardware. Its receiver processes channels within the sampled bandwidth and can produce decoded records and a dashboard. For studying your own mesh, it connects familiar waterfall and receiver concepts with packet behavior. The README explains hardware bandwidth limits and distinguishes valid decoded records from RF diagnostic observations.","canonicalUrl":"https://github.com/alphafox02/meshtastic-sniffer","topics":["sdr-discovery","mesh-radio"],"tags":["Meshtastic","SDR","LoRa","HackRF","signal analysis","receive-only"],"kind":"Project","maturity":"Experimental","level":"Intermediate","sources":[{"label":"meshtastic-sniffer README","url":"https://github.com/alphafox02/meshtastic-sniffer","type":"Developer","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."}],"body":[],"caveats":["This is developer documentation; the library has not compiled or tested the software with hardware.","An SDR's available bandwidth limits simultaneous channel coverage.","Interpreting encrypted payloads requires the appropriate key; use captures and keys you are authorized to inspect.","A single receiver does not become a direction finder merely by showing signal strength."],"reactions":[],"media":{"src":"/hot-topics-media/hackrf-hackathon.jpg","alt":"Raspberry Pi, HackRF One and antenna at a hackathon (illustrative photograph).","credit":"Michaelgraaf / Wikimedia Commons","license":"CC0 1.0","licenseUrl":"https://creativecommons.org/publicdomain/zero/1.0/","sourceUrl":"https://commons.wikimedia.org/wiki/File:HackRF_One_etc.jpg"},"attachments":[{"label":"Project source and build instructions","url":"https://github.com/alphafox02/meshtastic-sniffer","hosted":false,"license":"Original source; no mirrored copy"},{"label":"Radcom signal observation worksheet (TXT, v2)","url":"/hot-topics-downloads/signal-observation.txt","hosted":true,"license":"Radcom original · CC BY 4.0"}],"checkedAt":"2026-10-27T00:18:03.810Z","sourcePublishedAt":null,"status":"published","revision":2,"createdAt":"2026-10-27T00:44:49.540Z","updatedAt":"2026-10-27T02:11:54.879Z"},{"id":"mobile-whip-receive-build","title":"Mobile-Whip: an experimental receive-only antenna build","summary":"Mobile-Whip is an open hardware adaptation of the Mini-Whip concept intended for low-voltage or battery-powered reception. The repository includes design and simulation files, while its issue tracker is essential reading before a build. The author lists noise and possible oscillation concerns and notes the absence of suitable protection against accidental transmit power. Treat this as an experiment for builders who want to inspect and improve a design.","canonicalUrl":"https://github.com/skuep/Mobile-Whip","topics":["antennas-diy","sdr-discovery","portable-field"],"tags":["Mobile-Whip","receive only","HF","SDR","KiCad","battery"],"kind":"Project","maturity":"Experimental","level":"Advanced","sources":[{"label":"Mobile-Whip repository","url":"https://github.com/skuep/Mobile-Whip","type":"Developer","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."},{"label":"Mobile-Whip known issues","url":"https://github.com/skuep/Mobile-Whip/issues/2","type":"Developer","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."}],"body":[],"caveats":["Receive only. Do not connect it where transmit power can reach the antenna output.","The author reports higher noise and possible self-oscillation; these are unresolved design cautions, not a turnkey product endorsement."],"reactions":[],"media":null,"attachments":[{"label":"Radcom field-session checklist (TXT, v2)","url":"/hot-topics-downloads/field-checklist.txt","hosted":true,"license":"Radcom original · CC BY 4.0"}],"checkedAt":"2026-10-27T00:18:03.810Z","sourcePublishedAt":null,"status":"published","revision":2,"createdAt":"2026-10-27T00:44:46.604Z","updatedAt":"2026-10-27T02:12:52.759Z"},{"id":"morserino-echo-keyer-practice","title":"Morserino and M32 Pocket: hear it, send it back, check it","summary":"Morserino combines a Morse trainer, keyer and decoder. The developer describes Koch lessons, generated groups and words, and an echo exercise in which you send back what you hear. The current site also distinguishes the M32 Pocket from earlier hardware. That makes it a useful device to investigate when you want practice that involves both recognition and sending, rather than listening to recordings alone.","canonicalUrl":"https://www.morserino.info/","topics":["cw-morse","portable-field"],"tags":["CW","Morse","Morserino","M32 Pocket","keyer","trainer","Products"],"kind":"Guide","maturity":"Reference","level":"Beginner","sources":[{"label":"Morserino developer: trainer and keyer features","url":"https://www.morserino.info/","type":"Developer","checkedAt":"2026-10-27T02:36:31.000Z","note":"M32 Pocket and earlier models, Koch/echo training, keyer modes and model-specific features."},{"label":"Morserino developer — M32 Pocket FAQ","url":"https://github.com/oe1wkl/Morserino-32/blob/master/Documentation/FAQ/Morserino-32%20Pocket%20FAQ.md","type":"Developer","checkedAt":"2026-10-30T12:00:13.000Z","note":"Model-specific audio-connection warning and spoken-menu Accessibility Edition; FAQ describes 9.x and may include beta documentation. No release date inferred."}],"body":[{"heading":"Match the exercise to the problem","text":"Use character lessons for recognition and echo practice to connect sound with paddle timing. The developer lists adjustable spacing, feedback and several keyer modes. Select a small exercise you can repeat consistently, then change one setting at a time so improvement is not confused with an easier configuration."},{"heading":"Check the exact model","text":"Pocket-specific controls and games do not imply the same hardware in an older Morserino. The site describes Wi-Fi communication across the family and LoRa on earlier editions. Verify your unit and firmware against the manual before choosing accessories, configuring connections or expecting a particular practice feature."},{"heading":"Check audio wiring and accessibility options","text":"The developer FAQ warns that the Pocket's audio socket differs from earlier Morserinos: do not reuse an older audio lead or connect a receiver with an ordinary audio cable. Follow the Pocket-specific splitter instructions before making that connection. It also documents a Pocket-only Accessibility Edition with spoken menus; its feature set differs from the standard edition."}],"caveats":["Developer feature descriptions are not an independent hardware test.","A launch date was not established; this is a current product reference, not a dated new-release announcement.","Match the manual to the hardware, firmware and edition. The FAQ's rolling manual links can include beta releases."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-30T12:00:13.000Z","sourcePublishedAt":null,"status":"published","revision":2,"createdAt":"2026-10-27T02:50:11.435Z","updatedAt":"2026-10-30T12:01:00.370Z"},{"id":"nanovna-calibration","title":"Make antenna measurements you can repeat","summary":"NanoVNA's documentation explains the calibration workflow behind useful antenna and network measurements. Its guide covers open, short, load, isolation, and through standards, with saving and loading calibration data. It also describes how a changed frequency range affects calibration information. Read this before comparing antenna adjustments so that a changed measurement setup does not masquerade as an improved antenna.","canonicalUrl":"https://nanovna.com/?page_id=2","topics":["antennas-diy","portable-field"],"tags":["NanoVNA","VNA","SWR","calibration","antenna analyzer"],"kind":"Guide","maturity":"Reference","level":"Intermediate","sources":[{"label":"NanoVNA calibration guide","url":"https://nanovna.com/?page_id=2","type":"Developer","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."},{"label":"NanoVNA project overview","url":"https://nanovna.com/","type":"Developer","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."}],"body":[],"caveats":["NanoVNA variants have different hardware and performance limits; use the instructions for your device.","This is a documentation reference, not a claim that any specific analyzer or antenna was measured here.","Keep transmitters disconnected from an analyzer during measurement."],"reactions":[],"media":{"src":"/hot-topics-media/nanovna.jpg","alt":"NanoVNA showing a Smith chart (illustrative equipment photograph).","credit":"Elgull / Wikimedia Commons","license":"CC BY-SA 4.0","licenseUrl":"https://creativecommons.org/licenses/by-sa/4.0/","sourceUrl":"https://commons.wikimedia.org/wiki/File:NanoVNA.jpg"},"attachments":[{"label":"Radcom field-session checklist (TXT, v2)","url":"/hot-topics-downloads/field-checklist.txt","hosted":true,"license":"Radcom original · CC BY 4.0"}],"checkedAt":"2026-10-27T00:18:03.810Z","sourcePublishedAt":null,"status":"published","revision":2,"createdAt":"2026-10-27T00:44:47.195Z","updatedAt":"2026-10-27T02:12:49.201Z"},{"id":"nvent-color-smart-ground-rod-system","title":"nVent Color Smart: a dated ground-rod system announcement","summary":"nVent announced its Color Smart Ground Rod System on September 30, 2026. The manufacturer uses color identification across copper-bonded rods, connectors and accessories to help installers select compatible parts. That makes this a useful station-building news item about component selection. It does not establish that a color-coded rod improves soil conductivity, replaces bonding design or makes a radio station immune to lightning.","canonicalUrl":"https://www.nvent.com/en-us/resources/news/nvent-introduces-color-smart-ground-rod-system-reduce-product-selection-time-and-installation-errors","topics":["antennas-diy"],"tags":["nVent","ground rods","grounding","lightning","product announcement"],"kind":"News","maturity":"Reference","level":"Intermediate","sources":[{"label":"nVent launch announcement","url":"https://www.nvent.com/en-us/resources/news/nvent-introduces-color-smart-ground-rod-system-reduce-product-selection-time-and-installation-errors","type":"Manufacturer","checkedAt":"2026-10-27T02:46:06.000Z","note":"Dated September 30, 2026; product identification system."},{"label":"ARRL grounding reference","url":"https://www.arrl.org/grounding","type":"Official documentation","checkedAt":"2026-10-27T02:46:06.000Z","note":"Distinguishes safety, lightning and RF grounding."}],"body":[{"heading":"What changed","text":"The announcement covers a coordinated grounding product family, including Hammerlock and Lay-In Hammerlock connections. Its stated benefit is reducing selection time and installation mistakes. When reviewing a specification or installer proposal, match the complete component family and documented application, rather than treating rod diameter or color as a universal compatibility rule."},{"heading":"Put the rod in context","text":"ARRL separates electrical safety grounding, lightning protection and control of unwanted RF currents. These purposes overlap but have different requirements. A station assessment should consider the building grounding system, bonding, cable entry and local conditions together. Have a qualified electrician or lightning-protection professional evaluate the site and applicable requirements."}],"caveats":["Manufacturer claims are attributed; no independent installation or lightning testing is reported here."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:46:06.000Z","sourcePublishedAt":"2026-09-30T00:00:00.000Z","status":"published","revision":1,"createdAt":"2026-10-27T02:48:53.917Z","updatedAt":"2026-10-27T02:48:53.917Z"},{"id":"osmand-offline-map-prep","title":"Prepare offline maps before your next field outing","summary":"OsmAnd's guide explains how to select and download regional maps for offline use. It recommends starting with vector maps, which support the app's navigation, search and map interactions without relying on a live connection for map data. For a portable radio outing, preparing the relevant region beforehand makes the map a useful companion to your station plan and field notes.","canonicalUrl":"https://www.osmand.net/docs/user/start-with/download-maps/","topics":["maps-tracking","portable-field"],"tags":["OsmAnd","offline maps","navigation","field planning"],"kind":"Guide","maturity":"Reference","level":"Beginner","sources":[{"label":"OsmAnd download-maps guide","url":"https://www.osmand.net/docs/user/start-with/download-maps/","type":"Official documentation","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."}],"body":[],"caveats":["Mapping software alone does not measure a radio bearing or locate a transmitter.","Download the needed regions before losing connectivity."],"reactions":[],"media":null,"attachments":[{"label":"Radcom field-session checklist (TXT, v2)","url":"/hot-topics-downloads/field-checklist.txt","hosted":true,"license":"Radcom original · CC BY 4.0"}],"checkedAt":"2026-10-27T00:18:03.810Z","sourcePublishedAt":null,"status":"published","revision":2,"createdAt":"2026-10-27T00:44:50.157Z","updatedAt":"2026-10-27T02:11:23.952Z"},{"id":"osmand-offline-search-55-preview","title":"OsmAnd previews rebuilt offline search for version 5.5","summary":"OsmAnd's October 26, 2026 developer article describes a rebuilt offline search engine planned for version 5.5 and already offered in nightly builds. Announced changes include more flexible address entry, typo handling and broader category matching. For a field outing, the practical question is whether your downloaded maps and installed build can find the locations you actually need.","canonicalUrl":"https://osmand.net/blog/offline-search-video/","topics":["maps-tracking","portable-field"],"tags":["OsmAnd","offline maps","search","5.5","nightly","field planning"],"kind":"News","maturity":"Experimental","level":"Beginner","sources":[{"label":"OsmAnd — Why Offline Search Is So Hard","url":"https://osmand.net/blog/offline-search-video/","type":"Developer","checkedAt":"2026-10-29T12:03:49.419Z","note":"October 26, 2026 announcement distinguishes planned 5.5 availability from nightly builds."}],"body":[{"heading":"Treat the announcement as a preview","text":"The article distinguishes nightly access from the planned general release. Check your installed version before expecting the new behaviour. Developer speed and accuracy figures are not independent measurements and are not reproduced here as guaranteed performance."},{"heading":"Rehearse the field search","text":"Before leaving connectivity, try the destination, nearby facilities and an alternative access point with the required maps downloaded. Inspect the selected location rather than accepting a familiar place name alone. This is suggested preparation, not a tested navigation result."}],"caveats":["Nightly software may contain defects. This entry does not confirm a general release of version 5.5.","No app build was installed or benchmarked; the article's publication date is not a release date."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-29T12:03:49.419Z","sourcePublishedAt":"2026-10-26T00:00:00.000Z","status":"published","revision":1,"createdAt":"2026-10-29T12:04:11.408Z","updatedAt":"2026-10-29T12:04:11.408Z"},{"id":"osmand-trip-recording-field-notes","title":"OsmAnd trip recording for field reports","summary":"OsmAnd's Trip Recording plugin saves a route that can later be displayed, reviewed and shared. For a field-radio outing, a track can provide context for written observations about stops and terrain. It complements a radio log without measuring radio coverage itself. Enable the plugin and check its settings before the outing, then verify a short saved recording on the device you intend to use in the field.","canonicalUrl":"https://osmand.net/docs/user/plugins/trip-recording/","topics":["maps-tracking","portable-field"],"tags":["OsmAnd","GPX","trip recording","field notes","offline planning"],"kind":"Guide","maturity":"Reference","level":"Beginner","sources":[{"label":"OsmAnd Trip Recording documentation","url":"https://osmand.net/docs/user/plugins/trip-recording/","type":"Developer","checkedAt":"2026-10-27T02:36:30.000Z","note":"Explains setup, recording intervals, saving tracks and platform limitations."}],"body":[{"heading":"Balance detail and battery use","text":"Shorter recording intervals provide more route detail but use more battery. Check location permissions and test with the screen locked: OsmAnd notes that background behavior differs across platforms. Choose settings for the outing rather than assuming the most frequent recording is best."},{"heading":"Review before sharing","text":"Save the track and inspect it for gaps. Our recommendation is to remove sensitive start or end points before sharing. Keep radio observations in your notes: a route line alone cannot establish where messages were delivered or where an antenna performed better."}],"caveats":["Android and iOS controls differ. No phone or background-recording test was performed here.","This is an established feature reference; no new-release date was established."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:36:30.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:51:07.774Z","updatedAt":"2026-10-27T02:51:07.774Z"},{"id":"pirate-radio-culture-and-boundaries","title":"Pirate radio: unusual programmes, elusive signals, real legal boundaries","summary":"Pirate-radio listening combines radio discovery with unconventional broadcasting: music themes, comedy, drama and stations that appear only occasionally. HFUnderground's community guide describes this shortwave listening culture and the receiver choices behind it. Treat a station name or forum report as a listening clue, not proof of its identity, location or licensing status. Amateur radio and broadcasting are different activities; a ham licence does not turn a music broadcast into an authorised amateur transmission.","canonicalUrl":"https://www.hfunderground.com/wiki/index.php/Pirate_Radio_New_Listener_Guide_and_FAQ","topics":["sdr-discovery","hf-digital"],"tags":["pirate radio","shortwave","listening","broadcasting","history"],"kind":"Guide","maturity":"Reference","level":"Beginner","sources":[{"label":"HFUnderground community listening guide","url":"https://www.hfunderground.com/wiki/index.php/Pirate_Radio_New_Listener_Guide_and_FAQ","type":"Operator report","checkedAt":"2026-10-27T02:40:22.472Z","note":"Community-authored descriptions of programme styles, receiver options and listening practice; not a regulator or current on-air confirmation."},{"label":"eCFR — 47 CFR 97.113","url":"https://www.ecfr.gov/current/title-47/chapter-I/subchapter-D/part-97/subpart-B/section-97.113","type":"Official documentation","checkedAt":"2026-10-27T02:40:22.472Z","note":"U.S. amateur-service restrictions on broadcasting, music and retransmission; read with the rule's exceptions."},{"label":"FCC dataset catalogue","url":"https://catalog.data.gov/dataset/pirate-radio-broadcasting-database","type":"Official documentation","checkedAt":"2026-10-27T02:40:22.472Z","note":"Scope of the FCC enforcement-action database; not a current station-status feed."}],"body":[{"heading":"Start with the programme and the evidence","text":"Listen for a spoken identification and note the UTC date, time, receive frequency and mode. Separate what you personally heard from another listener's report. A replay can repeat an old station name, and a distant internet receiver hears a different propagation path from the radio on your desk."},{"heading":"Understand the boundary","text":"For U.S. amateurs, section 97.113 restricts broadcasting, music transmissions and retransmission, with specific exceptions. The FCC's pirate-radio database records enforcement actions; it is not a live directory of every unauthorised station. This library covers history and reception, not instructions to operate an unlicensed broadcast transmitter."}],"caveats":["Historical frequency lists and old reports are not proof that a station is on air now.","Reception, recording and disclosure rules depend on jurisdiction and the type of communication. This is not individual legal advice."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:40:22.472Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:51:11.617Z","updatedAt":"2026-10-27T02:51:11.617Z"},{"id":"polyphaser-coax-surge-protector-selection","title":"Coax surge protectors: select for the station and the grounding system","summary":"PolyPhaser’s technical paper explains why a coaxial surge protector is only one part of a station protection system. It discusses center-conductor and shield behavior, grounding and different protector architectures. Read this as a manufacturer’s established technical reference, not a new-product announcement or a promise that equipment will survive every strike. Product selection must account for the radio path and the site together.","canonicalUrl":"https://www.polyphaser.com/News/DownloadFile?downloadGuid=52f23510-c294-40d8-889b-b63f1c6fdcb5","topics":["antennas-diy","remote-control"],"tags":["PolyPhaser","surge protection","lightning","grounding","coax"],"kind":"Guide","maturity":"Reference","level":"Intermediate","sources":[{"label":"PolyPhaser coax protection white paper","url":"https://www.polyphaser.com/News/DownloadFile?downloadGuid=52f23510-c294-40d8-889b-b63f1c6fdcb5","type":"Manufacturer","checkedAt":"2026-10-27T02:46:06.000Z","note":"Manufacturer paper; copyright 2017; no exact publication date."},{"label":"ARRL grounding reference","url":"https://www.arrl.org/grounding","type":"Official documentation","checkedAt":"2026-10-27T02:46:06.000Z","note":"Separate grounding purposes; no installation prescription."}],"body":[{"heading":"Check what must pass through","text":"Write down the frequency range, transmitter power, connector arrangement and whether the feed line also carries DC to an antenna accessory. DC-blocking and DC-passing designs are not interchangeable in every installation. Compare the exact model’s documentation and test conditions; a large surge-current headline alone does not explain equipment protection."},{"heading":"Review the complete entry system","text":"The paper emphasizes that a protector needs an appropriate grounding arrangement to function as intended. ARRL also distinguishes lightning protection from RF and electrical safety grounding. Have a qualified professional assess bonding, cable entry and the site’s applicable requirements. Adding an isolated rod or inline device is not a complete design."}],"caveats":["The paper is historical technical material; obtain current model specifications and site-specific advice."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:46:06.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:49:35.812Z","updatedAt":"2026-10-27T02:49:35.812Z"},{"id":"pota-activation-guide","title":"Take your station to a park: the POTA activator guide","summary":"The official POTA activator guide follows a trip from preparation through operating, packing up, and submitting logs. It brings together the practical details that make a portable station work: equipment checks, batteries, accurate clocks, operating aids, and consideration for park visitors. Use it as a starting point for your own field checklist, then follow the current program rules and the requirements of the park you plan to visit.","canonicalUrl":"https://docs.pota.app/docs/activator_reference/activator_guide-english.html","topics":["portable-field","antennas-diy"],"tags":["POTA","portable","field power","logging","antennas"],"kind":"Guide","maturity":"Reference","level":"Beginner","sources":[{"label":"Parks on the Air Activator Guide","url":"https://docs.pota.app/docs/activator_reference/activator_guide-english.html","type":"Official documentation","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."}],"body":[],"caveats":["POTA says its guide is not a complete checklist or procedure.","Its park maps indicate general proximity and should not be used as navigation maps.","Check current access and park-specific permission; tree attachments and stakes can be restricted."],"reactions":[],"media":{"src":"/hot-topics-media/icom705.jpg","alt":"ICOM IC-705 (illustrative equipment photograph).","credit":"Batchman99 / Wikimedia Commons","license":"CC BY-SA 4.0","licenseUrl":"https://creativecommons.org/licenses/by-sa/4.0/","sourceUrl":"https://commons.wikimedia.org/wiki/File:ICOM_IC-705.jpg"},"attachments":[{"label":"Radcom field-session checklist (TXT, v2)","url":"/hot-topics-downloads/field-checklist.txt","hosted":true,"license":"Radcom original · CC BY 4.0"}],"checkedAt":"2026-10-27T00:18:03.810Z","sourcePublishedAt":null,"status":"published","revision":2,"createdAt":"2026-10-27T00:44:48.481Z","updatedAt":"2026-10-27T02:12:33.471Z"},{"id":"pota-club-activation","title":"Plan a club activation without tangled logs","summary":"POTA's club guide explains how a shared callsign changes planning, spotting, and logging. It recommends coordinating operators and station footprints, and describes how the station callsign and individual operator are represented in the log. That makes it useful for clubs bringing experienced operators and newcomers together around one portable setup. Keep the official guide alongside your own operating plan so program-specific details stay easy to find.","canonicalUrl":"https://docs.pota.app/docs/activator_reference/activator_guide_clubs.html","topics":["portable-field","hf-digital"],"tags":["POTA","club","Field Day skills","ADIF","logging"],"kind":"Guide","maturity":"Reference","level":"Intermediate","sources":[{"label":"Parks on the Air Club Activation Guide","url":"https://docs.pota.app/docs/activator_reference/activator_guide_clubs.html","type":"Official documentation","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."}],"body":[],"caveats":["A club activation and several individual activations are different arrangements; do not mix their logging procedures.","The source was last modified October 4, 2026; follow it for current program details.","A shared location does not remove the need to coordinate interference between stations."],"reactions":[],"media":{"src":"/hot-topics-media/icom705.jpg","alt":"ICOM IC-705 (illustrative equipment photograph).","credit":"Batchman99 / Wikimedia Commons","license":"CC BY-SA 4.0","licenseUrl":"https://creativecommons.org/licenses/by-sa/4.0/","sourceUrl":"https://commons.wikimedia.org/wiki/File:ICOM_IC-705.jpg"},"attachments":[{"label":"Radcom field-session checklist (TXT, v2)","url":"/hot-topics-downloads/field-checklist.txt","hosted":true,"license":"Radcom original · CC BY 4.0"}],"checkedAt":"2026-10-27T00:18:03.810Z","sourcePublishedAt":null,"status":"published","revision":2,"createdAt":"2026-10-27T00:44:48.268Z","updatedAt":"2026-10-27T02:12:38.232Z"},{"id":"radio-caroline-offshore-history","title":"Radio Caroline: from offshore broadcasting to a licensed station","summary":"Radio Caroline began broadcasting from a ship in 1964. Its surviving vessel, Ross Revenge, is part of that offshore history. The UK community radio licence awarded in 2017 opens a later chapter in the story, when listeners could tune to 648 kHz for a signal from the Suffolk coast.","canonicalUrl":"https://www.radiocaroline.co.uk/pdf/Caroline_Publicity_6pp_2022.pdf","topics":["sdr-discovery","hf-digital"],"tags":["pirate radio","Radio Caroline","offshore radio","history","medium wave"],"kind":"Guide","maturity":"Historical","level":"Beginner","sources":[{"label":"Radio Caroline — historical publicity booklet","url":"https://www.radiocaroline.co.uk/pdf/Caroline_Publicity_6pp_2022.pdf","type":"Official documentation","checkedAt":"2026-11-07T13:06:00.000Z","note":"The station's own history, including 1964 origins, later vessels and modern services; promotional claims remain attributed."},{"label":"Radio Caroline — The History of 648","url":"https://www.radiocaroline.co.uk/history_of_648.html","type":"Official documentation","checkedAt":"2026-11-07T13:06:00.000Z","note":"Station-published historical account of the frequency and transmission sites."},{"label":"Radio Caroline official website","url":"https://www.radiocaroline.co.uk/","type":"Official documentation","checkedAt":"2026-11-07T13:06:00.000Z","note":"Official station homepage with listening options and links to station material."},{"label":"Ofcom — May 2017 AM community radio licence awards","url":"https://www.ofcom.org.uk/siteassets/resources/documents/manage-your-licence/community-radio/awards/five-am-community-radio-licence-awards-may-2017.pdf?v=322490","type":"Official documentation","checkedAt":"2026-11-07T13:06:00.000Z","note":"UK regulator identifies the original licensee and service area in its May 2017 award."},{"label":"Radio Caroline on 648 AM","url":"https://www.radiocaroline.co.uk/648_am.html","type":"Official documentation","checkedAt":"2026-11-07T13:06:00.000Z","note":"Station account dates the return to medium wave and explains how its engineering team uses reception reports."}],"body":[{"heading":"Read the story in stages","text":"The station's account describes the 1960s ships, the 1972 return, the loss of Mi Amigo in 1980, the Ross Revenge era beginning in 1983 and the later recovery of that ship. This is a participant's history; its political judgments and audience claims need independent corroboration before being treated as settled facts."},{"heading":"A frequency has a history too","text":"Caroline's separate history of 648 kHz follows earlier BBC uses and the development of the Orford Ness transmission site. It makes a useful companion to the ship story: studio location, transmitter location and programme identity need not be the same. Follow the station's own current listening information for today's services."},{"heading":"When did licensed AM broadcasting begin?","text":"In May 2017, Ofcom awarded Radio Caroline AM Broadcasting Ltd a community radio licence for Suffolk and northern Essex. The station dates its return to medium wave to the end of that year, using the land-based transmitter at Orford Ness. Its 648 AM page invites listeners to report what they heard, where they heard it and which receiver they used. The engineering volunteers read the reports and may be unable to answer each one."}],"caveats":["The linked publicity document is a historical source, not a current price, coverage or programme schedule.","This entry links to the originals; it does not reproduce the station's recordings, artwork or photographs."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-11-07T13:06:00.000Z","sourcePublishedAt":null,"status":"published","revision":2,"createdAt":"2026-10-27T02:51:21.004Z","updatedAt":"2026-11-07T13:06:28.100Z"},{"id":"radio-orienteering-first-hunt","title":"Radio orienteering: turn bearings into a cooperative field activity","summary":"Radio orienteering combines receiving, direction finding and map reading to locate purposefully placed transmitters. ARRL describes the organized sport, while Open ARDF offers a progression for teaching beginners. It is an approachable way for a club to connect antenna knowledge with outdoor skills. Start with a controlled exercise and known transmitters; the useful outcome is learning to interpret bearings, not guessing a location from a signal-strength number alone.","canonicalUrl":"https://openardf.org/teaching-ardf/teaching-ardf-101/","topics":["maps-tracking","portable-field","antennas-diy"],"tags":["radio orienteering","ARDF","fox hunting","bearings","club activity","Morse identifiers"],"kind":"Guide","maturity":"Reference","level":"Beginner","sources":[{"label":"Open ARDF Teaching ARDF 101","url":"https://openardf.org/teaching-ardf/teaching-ardf-101/","type":"Official documentation","checkedAt":"2026-10-27T02:36:30.000Z","note":"Instructor-authored sequence, equipment and beginner-course considerations."},{"label":"ARRL Radio Orienteering","url":"https://www.arrl.org/amateur-radio-direction-finding","type":"Official documentation","checkedAt":"2026-10-27T02:36:30.000Z","note":"Explains the organized sport and points to participation resources."}],"body":[{"heading":"Make the first course easy to understand","text":"Open ARDF recommends matching receivers to the transmitters, a manageable practice area and skills taught in sequence. Its beginner lessons avoid the extra complexity of timed transmitter cycles. Our suggested club session begins with a visible demonstration, then a short hidden-transmitter exercise, followed by comparing what each participant heard and plotted."},{"heading":"Prepare people as well as equipment","text":"Assign responsibility for the authorized transmitters and confirm permission to use the site. Explain course boundaries and the return plan before separating the group. A map holder and compass make it easier to keep a bearing while moving. Progress to more complex hunts only after participants can operate their receivers confidently."}],"caveats":["The guide concerns an agreed exercise with placed transmitters; it does not authorize entering private property or tracking people.","No course, receiver or antenna was tested here; event details must be checked with the organizer."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:36:30.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:50:56.177Z","updatedAt":"2026-10-27T02:50:56.177Z"},{"id":"remote-hf-station-planning","title":"A remote station needs a recovery plan","summary":"Michael Walker's introductory remote-HF guide looks beyond the radio connection to station power, modem recovery, a nearby computer and supporting hardware. Its planning questions remain useful: how will you restart equipment, diagnose a failure and recover access when you cannot visit the station? Read it as a collection of design considerations, then verify present-day equipment and requirements separately.","canonicalUrl":"https://www.flexradio.com/documentation/a-beginners-guide-to-remote-hf-station-components/","topics":["remote-control","antennas-diy","hf-digital"],"tags":["remote HF","station control","power","recovery","FlexRadio","planning"],"kind":"Guide","maturity":"Reference","level":"Beginner","sources":[{"label":"FlexRadio guide page","url":"https://www.flexradio.com/documentation/a-beginners-guide-to-remote-hf-station-components/","type":"Manufacturer","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."},{"label":"Remote HF Station Setup, May 2022","url":"https://edge.flexradio.com/www/offload/20221111132151/A-Beginners-Guide-to-Remote-HF-Station-Setup.pdf","type":"Manufacturer","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."}],"body":[],"caveats":["The document is dated May 2022; product names, prices and availability may have changed.","The author describes ideas rather than a warranted, fully tested system.","Do not repeat older claims about particular Internet technologies as universal current limitations."],"reactions":[],"media":null,"attachments":[{"label":"Remote HF station planning guide (PDF)","url":"https://edge.flexradio.com/www/offload/20221111132151/A-Beginners-Guide-to-Remote-HF-Station-Setup.pdf","hosted":false,"license":"Original source; no mirrored copy"}],"checkedAt":"2026-10-27T00:18:03.810Z","sourcePublishedAt":"2022-05-01T12:00:00.000Z","status":"published","revision":1,"createdAt":"2026-10-27T00:44:50.786Z","updatedAt":"2026-10-27T00:44:50.786Z"},{"id":"reticulum-sideband-start","title":"Reticulum and Sideband: build a messaging network around available links","summary":"Reticulum is a networking stack; Sideband is an application that uses it. The developer documents links carried over technologies including LoRa, packet radio and Wi-Fi, while Sideband provides messaging, telemetry and map features. This offers another route for people exploring communications beyond a single commercial service. Begin by understanding the application, network and hardware layers separately instead of assuming every device described as mesh belongs to the same network.","canonicalUrl":"https://reticulum.network/manual/gettingstartedfast.html","topics":["mesh-radio","remote-control","maps-tracking"],"tags":["Reticulum","Sideband","LXMF","off-grid","messaging","networking"],"kind":"Guide","maturity":"Reference","level":"Intermediate","sources":[{"label":"Reticulum Getting Started Fast","url":"https://reticulum.network/manual/gettingstartedfast.html","type":"Developer","checkedAt":"2026-10-27T02:36:30.000Z","note":"Describes platform-specific setup and available interfaces."},{"label":"Sideband developer repository and distribution notice","url":"https://github.com/markqvist/Sideband","type":"Developer","checkedAt":"2026-10-27T02:36:30.000Z","note":"Documents messaging, maps, telemetry and current distribution arrangements."}],"body":[{"heading":"Start with a small experiment","text":"Our recommended first exercise is two devices on a link you control, exchanging a short message and checking the result at both ends. Follow the platform-specific installation guide. Only then add another interface or relay. Record which path actually carried the message so an internet-assisted success is not mistaken for a radio-only result."},{"heading":"Keep capabilities and permission distinct","text":"Sideband's developer lists offline maps, authenticated telemetry queries and remote commands. Configure only features your group needs and protect its identities and credentials. The repository also says source development has moved to Reticulum-based distribution, while packages continue through documented channels; consult the current installation information rather than relying on an old checkout."}],"caveats":["Developer descriptions are not an independent security audit or a guarantee of delivery.","Check applicable radio rules before carrying encrypted traffic over a particular band; software capability does not supply transmission authorization."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:36:30.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:50:45.392Z","updatedAt":"2026-10-27T02:50:45.392Z"},{"id":"rez-scout-xform-modular-transformer","title":"REZ Scout XFORM: a modular 4:1 antenna accessory","summary":"REZ Antenna’s Scout XFORM adds a modular transformer option to its Scout antenna system. The manufacturer presents the 4:1 module for configurations such as Rybakov antennas and loops, with direct attachment to Scout XF and a jumper arrangement for older Scout bases. This is an accessory reference, useful for understanding which parts form a complete antenna before ordering or packing a field kit.","canonicalUrl":"https://www.rezantenna.com/xform","topics":["antennas-diy","portable-field"],"tags":["REZ Antenna","Scout","transformer","Rybakov","modular antennas"],"kind":"Guide","maturity":"Reference","level":"Intermediate","sources":[{"label":"Scout XFORM manufacturer reference","url":"https://www.rezantenna.com/xform","type":"Manufacturer","checkedAt":"2026-10-27T02:46:06.000Z","note":"Current module, compatibility and development status."}],"body":[{"heading":"Plan a complete configuration","text":"Write down the intended antenna configuration first, then check the base, transformer, radiator, return path and feed line against the manufacturer’s instructions. A transformer changes the impedance presented to the radio system; it does not supply the missing wire, support or matching range needed by every possible arrangement."},{"heading":"Separate available and planned parts","text":"The current page identifies additional 5:1 and 9:1 modules as being developed. Treat those as future options. It also gives different SSB and digital duty-cycle ratings, and conditions weather resistance on proper assembly. Verify the exact configuration and operating mode instead of applying the largest power figure universally."}],"caveats":["No dated launch was verified. Planned modules are not represented as available."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:46:06.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:49:00.852Z","updatedAt":"2026-10-27T02:49:00.852Z"},{"id":"rigexpert-match-upgradeable-analyzer","title":"RigExpert MATCH: choose analyzer features by license","summary":"RigExpert MATCH is an antenna and cable analyzer whose measurement range and features depend on its license. The current manufacturer page specifies a base range of 0.1–75 MHz, with upgrades to 230 or 500 MHz. Its October 2025 announcement positioned MATCH as the successor to AA-55 ZOOM. This reference helps distinguish frequency coverage from the additional measurement tools included in each package.","canonicalUrl":"https://rigexpert.com/antenna-analyzers/upgaradeable-antenna-analyzer-match/","topics":["antennas-diy","portable-field"],"tags":["RigExpert","MATCH","antenna analyzer","test equipment","VNA"],"kind":"Guide","maturity":"Reference","level":"Intermediate","sources":[{"label":"MATCH product and license specifications","url":"https://rigexpert.com/antenna-analyzers/upgaradeable-antenna-analyzer-match/","type":"Manufacturer","checkedAt":"2026-10-27T02:46:06.000Z","note":"Current page lists 75 MHz base coverage."},{"label":"AA-55 ZOOM transition announcement","url":"https://rigexpert.com/news/a-new-chapter-begins-match-takes-the-torch-from-aa-55-zoom/","type":"Manufacturer","checkedAt":"2026-10-27T02:46:06.000Z","note":"Dated October 17, 2025; not a 2026 launch."}],"body":[{"heading":"Match the license to the job","text":"Start with the measurement you need: checking an HF antenna, comparing cable loss, measuring electrical length or locating a cable fault. RigExpert places cable tools and user calibration in upgraded licenses, with time-domain reflectometry in RFE. Compare the current license table before assuming every advertised feature is included in the base unit."},{"heading":"Make measurements repeatable","text":"Record the analyzer firmware, licensed functions, adapters and measurement location alongside a saved trace. Moving from the antenna feedpoint to the shack changes what is being measured. AntScope support offers a way to retain results; consistent setup makes those records more useful than comparing isolated minimum-SWR numbers from different configurations."}],"caveats":["Published specifications and feature bundles can change; confirm the current license before purchase."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:46:06.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:48:57.569Z","updatedAt":"2026-10-27T02:48:57.569Z"},{"id":"rigexpert-wilkinson-divider-measurement-report","title":"Antenna dividers and combiners: look beyond the frequency label","summary":"In a September 25, 2026 report, RigExpert's Oleksandr Antonov describes measuring a low-cost Wilkinson divider for satellite reception. The useful lesson is to compare insertion loss, port isolation and matching at the intended frequency. This is a manufacturer-authored bench account, not independent Radcom testing or a recommendation to buy that board.","canonicalUrl":"https://rigexpert.com/news/a-few-dollar-wilkinson-divider-what-can-it-really-do/","topics":["antennas-diy","sdr-discovery","space-radio"],"tags":["Wilkinson","divider","combiner","RigExpert","VNA","receive chain","feed lines"],"kind":"Guide","maturity":"Reference","level":"Intermediate","sources":[{"label":"RigExpert — Wilkinson divider measurement report","url":"https://rigexpert.com/news/a-few-dollar-wilkinson-divider-what-can-it-really-do/","type":"Manufacturer","checkedAt":"2026-10-31T12:05:46.000Z","note":"Dated September 25, 2026; named RigExpert employee reports one board's measurements and limitations."}],"body":[{"heading":"Separate splitting from excess loss","text":"The report distinguishes the nominal 3 dB division into two equal paths from additional losses in the board. It reports increasing excess loss toward the upper end of its advertised range. Those results concern the tested sample, not every Wilkinson divider."},{"heading":"Keep the measurement setup with the result","text":"The author describes terminating unused ports with suitable 50-ohm loads and checking calibration. Record those conditions when comparing measurements. A receiving experiment does not establish transmitter power handling; the report identifies uncertainty about the board's rating."}],"caveats":["No measurements or reception were performed by Radcom. The source author works for RigExpert, whose equipment appears in the report.","This is an established technical reference, not a new product launch. Original graphs, photos and data files are linked, not copied."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-31T12:05:46.000Z","sourcePublishedAt":"2026-09-25T00:00:00.000Z","status":"published","revision":1,"createdAt":"2026-10-31T12:06:07.902Z","updatedAt":"2026-10-31T12:06:07.902Z"},{"id":"rtl-sdr-blog-v4l-launch","title":"RTL-SDR Blog V4L: the 2026 Lite successor needs the right driver","summary":"RTL-SDR Blog announced the V4L Lite on August 11, 2026 after the original V4’s tuner-chip supply ended. The manufacturer explains that V4L uses an R828S tuner and two-way input filtering rather than the V4’s three-way arrangement, while retaining the general V4 approach. This is a documented product release, but its launch-era stock and delivery statements should not be treated as today’s inventory.","canonicalUrl":"https://www.rtl-sdr.com/rtl-sdr-blog-v4l-lite-now-available-for-purchase/","topics":["sdr-discovery","hf-digital","antennas-diy"],"tags":["RTL-SDR","V4L","V4","USB receiver","drivers","product announcement"],"kind":"News","maturity":"Reference","level":"Intermediate","sources":[{"label":"RTL-SDR Blog V4L launch announcement","url":"https://www.rtl-sdr.com/rtl-sdr-blog-v4l-lite-now-available-for-purchase/","type":"Manufacturer","checkedAt":"2026-10-27T02:40:23.000Z","note":"Dated August 11, 2026 launch and tuner/filtering change."},{"label":"RTL-SDR Blog V4L user guide","url":"https://www.rtl-sdr.com/v4l/","type":"Manufacturer","checkedAt":"2026-10-27T02:40:23.000Z","note":"Required driver updates and application-specific setup."},{"label":"RTL-SDR Blog V4 end-of-line notice","url":"https://www.rtl-sdr.com/rtl-sdr-blog-v4-end-of-line/","type":"Manufacturer","checkedAt":"2026-10-27T02:40:23.000Z","note":"May 14, 2026 manufacturer supply and product-transition statement."}],"body":[{"heading":"The compatibility step that matters","text":"The V4L guide says updated drivers are necessary; an old installation can produce no useful reception even when the USB device is detected. Follow the instructions for your actual application and operating system rather than assuming an older V3 or V4 setup is sufficient."},{"heading":"Compare the tradeoff","text":"The change in front-end filtering is a design difference, not a universal better-or-worse verdict. Your local signal environment and antenna matter. Check current official documentation and authorized seller information, and keep the older V4’s end-of-line status distinct from V4L support."}],"caveats":["No price, current stock promise or independent sensitivity test is included.","The August announcement is dated historical evidence, not a live inventory feed."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:40:23.000Z","sourcePublishedAt":"2026-08-11T00:00:00.000Z","status":"published","revision":1,"createdAt":"2026-10-27T02:48:29.809Z","updatedAt":"2026-10-27T02:48:29.809Z"},{"id":"satnogs-observation-starter","title":"SatNOGS: explore satellite telemetry before building a ground station","summary":"SatNOGS connects an open ground-station project, an observation network and a searchable satellite database. It offers a way to study received spacecraft signals and dated observation records before designing your own receiving station. The project’s public pages explain the relationship between equipment, scheduled observations and shared results. Begin with a specific satellite and a question about its data, rather than assuming every listed object is currently audible.","canonicalUrl":"https://satnogs.org/","topics":["space-radio","sdr-discovery","remote-control","antennas-diy"],"tags":["SatNOGS","telemetry","ground station","SDR","open source","satellite database"],"kind":"Guide","maturity":"Reference","level":"Beginner","sources":[{"label":"SatNOGS: project overview","url":"https://satnogs.org/","type":"Developer","checkedAt":"2026-10-27T02:36:31.000Z","note":"Open ground-station network, satellite database and station documentation."},{"label":"SatNOGS: network overview","url":"https://network.satnogs.org/","type":"Developer","checkedAt":"2026-10-27T02:36:31.000Z","note":"Remote observation management, public observation results and documentation links."},{"label":"SatNOGS: satellite database","url":"https://db.satnogs.org/","type":"Developer","checkedAt":"2026-10-27T02:36:31.000Z","note":"Searchable satellite records and dated received-data entries; not a guarantee of current activity."}],"body":[{"heading":"Follow a record through the system","text":"Look up a satellite, check the dates associated with available data and compare observations where available. Distinguish a database listing from a successful recent reception. This is useful preparation for deciding which receiving band, antenna and decoder a future station would actually need."},{"heading":"Build from current project documentation","text":"The network links to construction and integration documentation for owners adding stations. Review the current supported setup before purchasing parts. Public observations also create publication responsibilities: use the project’s stated reuse terms and avoid treating a technical database as blanket permission to intercept or redistribute unrelated communications."}],"caveats":["Older FAQ hardware, cost and station-count examples were not adopted as current specifications.","No observation was scheduled and no ground station was operated."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:36:31.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:50:24.234Z","updatedAt":"2026-10-27T02:50:24.234Z"},{"id":"sdrconnect-1010-release","title":"SDRconnect 1.0.10: small-screen controls and scheduled recording","summary":"SDRplay’s release notes date SDRconnect 1.0.10 to August 14, 2026. Listed additions include a compact view for smaller touchscreens, more appearance themes, a recording scheduler with recurrence, and a revised remote-device editor. The notes also specify an nRSP-ST firmware minimum. This entry preserves what that particular release changed; it does not assume that the document will remain the newest software release.","canonicalUrl":"https://sdrplay.com/wp-content/uploads/2026/04/SDRconnect_Release_Notes.pdf","topics":["sdr-discovery","remote-control"],"tags":["SDRplay","SDRconnect","software release","scheduled recording","accessibility","touchscreen"],"kind":"News","maturity":"Reference","level":"Intermediate","sources":[{"label":"SDRplay SDRconnect release notes","url":"https://sdrplay.com/wp-content/uploads/2026/04/SDRconnect_Release_Notes.pdf","type":"Manufacturer","checkedAt":"2026-10-27T02:40:23.000Z","note":"Version 1.0.10 date, scheduler, compact view, themes, firmware minimum and headless-only features."},{"label":"SDRplay SDRconnect product page","url":"https://sdrplay.com/sdrconnect/","type":"Manufacturer","checkedAt":"2026-10-27T02:40:23.000Z","note":"Official software entry point and platform context."}],"body":[{"heading":"Match the update to a real need","text":"A compact view may suit a small display, while recurring recording can help with planned listening experiments. Try the workflow on a signal you are authorized to receive and record, and check storage space and time settings before depending on an unattended capture."},{"heading":"Keep the requirements attached","text":"The 1.0.10 notes require nRSP-ST firmware 1.0.15 or later. They also distinguish headless-only WebSocket access-control and secure-connection features. Do not assume every listed networking feature appears in the ordinary graphical interface or replaces a secure network design."}],"caveats":["Release date is August 14, 2026; check the current download before updating.","No installation, unattended recording or security configuration was tested."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:40:23.000Z","sourcePublishedAt":"2026-08-14T00:00:00.000Z","status":"published","revision":1,"createdAt":"2026-10-27T02:48:36.723Z","updatedAt":"2026-10-27T02:48:36.723Z"},{"id":"sdrplay-nrsp-st-network-receiver","title":"SDRplay nRSP-ST: put the receiver near the antenna","summary":"The nRSP-ST combines an SDR receiver and host computer in a networked unit. SDRplay lists continuous 1 kHz to 2 GHz reception through its SMA inputs, Ethernet and Wi-Fi connectivity, and operation with SDRconnect. The appeal is placement: the receiving hardware can sit closer to the antenna while the operator uses a networked device elsewhere. This is a current product reference, not a newly claimed launch.","canonicalUrl":"https://sdrplay.com/product/nrsp-st/","topics":["sdr-discovery","remote-control","hf-digital"],"tags":["SDRplay","nRSP-ST","network receiver","Ethernet","Wi-Fi","product spotlight"],"kind":"Guide","maturity":"Reference","level":"Intermediate","sources":[{"label":"SDRplay nRSP-ST product specifications","url":"https://sdrplay.com/product/nrsp-st/","type":"Manufacturer","checkedAt":"2026-10-27T02:40:23.000Z","note":"Receiver role, inputs, network interfaces and operating limits."},{"label":"SDRplay nRSP-ST datasheet","url":"https://sdrplay.com/wp-content/uploads/2026/06/nRSP-ST_Datasheet.pdf","type":"Manufacturer","checkedAt":"2026-10-27T02:40:23.000Z","note":"Integrated receiver/host design and spectrum capabilities."}],"body":[{"heading":"Plan the physical side first","text":"Choose a suitable location with power, networking and appropriate antenna protection. A shorter RF feed can be useful, but the receiver still needs an environment within its published limits. Moving the box does not automatically solve local electrical noise or make an outdoor installation weatherproof."},{"heading":"Use the supported access path","text":"SDRplay’s setup flow uses SDRconnect to discover and operate the receiver. Establish local operation before evaluating access from elsewhere. Compare input connectors and frequency limits, and keep software and device firmware requirements together when planning an update."}],"caveats":["The BNC input has a different upper frequency limit from the SMA inputs.","Remote usability, RF performance and network reliability were not tested here."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:40:23.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:48:32.791Z","updatedAt":"2026-10-27T02:48:32.791Z"},{"id":"sdrpp-receiver-guide","title":"Explore the waterfall with SDR++","summary":"SDR++ is an open-source receiver application with a spectrum display, waterfall and support for multiple receiver sources. Its official manual covers tuning, gain, filters, squelch, recording and using more than one VFO within available receiver bandwidth. It is a practical reference for moving from hearing a signal to understanding how the receiver's display and controls shape what you can hear.","canonicalUrl":"https://www.sdrpp.org/","topics":["sdr-discovery","hf-digital","remote-control"],"tags":["SDR++","waterfall","receiver","manual","recording","VFO"],"kind":"Manual","maturity":"Reference","level":"Beginner","sources":[{"label":"SDR++ project","url":"https://www.sdrpp.org/","type":"Official documentation","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."},{"label":"SDR++ User Guide, December 2022","url":"https://www.sdrpp.org/manual.pdf","type":"Official documentation","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."}],"body":[],"caveats":["The linked manual is marked December 2022 and covers SDR++ up to version 1.1; newer builds can differ.","The project homepage offers nightly builds, which should not be described as a guaranteed stable release.","Actual band coverage depends on the connected receiver and antenna."],"reactions":[],"media":{"src":"/hot-topics-media/hackrf-hackathon.jpg","alt":"Raspberry Pi, HackRF One and antenna at a hackathon (illustrative photograph).","credit":"Michaelgraaf / Wikimedia Commons","license":"CC0 1.0","licenseUrl":"https://creativecommons.org/publicdomain/zero/1.0/","sourceUrl":"https://commons.wikimedia.org/wiki/File:HackRF_One_etc.jpg"},"attachments":[{"label":"Official SDR++ manual (PDF)","url":"https://www.sdrpp.org/manual.pdf","hosted":false,"license":"Original source; no mirrored copy"},{"label":"Radcom signal observation worksheet (TXT, v2)","url":"/hot-topics-downloads/signal-observation.txt","hosted":true,"license":"Radcom original · CC BY 4.0"}],"checkedAt":"2026-10-27T00:18:03.810Z","sourcePublishedAt":null,"status":"published","revision":2,"createdAt":"2026-10-27T00:44:49.740Z","updatedAt":"2026-10-27T02:11:51.905Z"},{"id":"sharkrf-cross-mode-reference","title":"Which digital-voice networks can your hotspot connect?","summary":"SharkRF's cross-mode reference lists the supported radio-to-network combinations for openSPOT4 and openSPOT4 Pro. It explains the Pro model's hardware transcoding and D-STAR cross-mode support, alongside the software conversions available on the standard model. The compatibility table is useful when matching an existing DMR, D-STAR or C4FM radio to a network without assuming that every digital format converts to every other one.","canonicalUrl":"https://manuals.sharkrf.com/openspot4/en/cross-modes.html","topics":["digital-voice","remote-control"],"tags":["SharkRF","openSPOT4","DMR","D-STAR","C4FM","hotspot","cross-mode"],"kind":"Manual","maturity":"Reference","level":"Beginner","sources":[{"label":"SharkRF cross-mode manual","url":"https://manuals.sharkrf.com/openspot4/en/cross-modes.html","type":"Manufacturer","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."}],"body":[],"caveats":["Model differences matter; the standard openSPOT4 does not support every Pro conversion.","Manufacturer sound-quality claims are not independent listening-test results.","Network access, radio configuration and applicable registration remain separate setup tasks."],"reactions":[],"media":null,"attachments":[{"label":"Official openSPOT4 online manual","url":"https://manuals.sharkrf.com/openspot4/en/","hosted":false,"license":"Original source; no mirrored copy"}],"checkedAt":"2026-10-27T00:18:03.810Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T00:44:49.326Z","updatedAt":"2026-10-27T00:44:49.326Z"},{"id":"sharkrf-link-app-compatibility","title":"SharkRF Link: check which device can supply the voice connection","summary":"The SharkRF Link app provides a convenient route to the management interface of supported openSPOT devices. Its additional voice-transceiver function is specifically supported by openSPOT4 Pro. SharkRF says M1KE is not supported by the app because M1KE already provides its own transceiver and web interface. These distinctions matter when someone expects the same phone or computer workflow to work across every SharkRF model.","canonicalUrl":"https://www.sharkrf.com/products/sharkrf-link-app/","topics":["digital-voice","remote-control"],"tags":["SharkRF Link","openSPOT4 Pro","hotspot","computer audio","compatibility"],"kind":"Guide","maturity":"Reference","level":"Intermediate","sources":[{"label":"SharkRF Link application documentation","url":"https://www.sharkrf.com/products/sharkrf-link-app/","type":"Manufacturer","checkedAt":"2026-10-27T02:40:23.000Z","note":"Supported devices, Pro-only transceiver function, Apple caveats and discovery conditions."}],"body":[{"heading":"Management is not the same as voice","text":"Opening a supported device’s settings is one capability; sending and receiving call audio through the app is another. Identify your exact model before treating a successful connection to the interface as proof that the microphone and speaker workflow is supported."},{"heading":"Check the client as well","text":"The manufacturer lists beta status for some Apple builds and specific unsupported iPhone models. Local device discovery also depends on the network. Consult the current compatibility notes before relying on a particular phone, and keep management access protected."}],"caveats":["Apple beta support and device exclusions can change.","This is documentation-based guidance; no app, phone or remote connection was tested."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:40:23.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:48:23.660Z","updatedAt":"2026-10-27T02:48:23.660Z"},{"id":"sharkrf-m1ke-network-handheld","title":"SharkRF M1KE: digital voice without a separate handheld-and-hotspot pair","summary":"M1KE is SharkRF’s battery-powered WLAN/IP voice device with its own microphone and speaker. The manufacturer lists access to DMR, D-STAR, C4FM, NXDN and other compatible networks, alongside direct communication between M1KE devices. It should be understood as a network voice product, not a conventional VHF/UHF handheld that gains every listed radio mode over the air. Network access requirements remain separate.","canonicalUrl":"https://www.sharkrf.com/products/m1ke/","topics":["digital-voice","remote-control","portable-field"],"tags":["SharkRF","M1KE","DMR","D-STAR","C4FM","IP voice","product spotlight"],"kind":"Guide","maturity":"Reference","level":"Intermediate","sources":[{"label":"SharkRF M1KE product page","url":"https://www.sharkrf.com/products/m1ke/","type":"Manufacturer","checkedAt":"2026-10-27T02:40:23.000Z","note":"Device role, direct communication and supported network families."},{"label":"SharkRF M1KE stable firmware changelog","url":"https://www.sharkrf.com/products/m1ke/changelog/","type":"Manufacturer","checkedAt":"2026-10-27T02:40:23.000Z","note":"Current firmware feature and maintenance history; dates not supplied for each revision."}],"body":[{"heading":"Follow the actual signal path","text":"For an internet-linked conversation, the microphone audio travels through the selected network connection and service. That differs from a handheld talking by RF to a local repeater. Decide which kind of contact you want before choosing between a M1KE, a hotspot or an ordinary transceiver."},{"heading":"Keep firmware and network setup together","text":"The stable firmware history records additions and fixes for supported services. Read the current manual alongside the changelog when configuring a connector. A supported protocol name does not establish that a particular server will accept an unregistered user or every feature."}],"caveats":["This is a current product overview; no launch date or independent audio test is asserted.","Amateur-network registration and operating requirements still apply where relevant."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:40:23.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:48:20.875Z","updatedAt":"2026-10-27T02:48:20.875Z"},{"id":"sharkrf-openspot4-firmware-notes","title":"openSPOT4 firmware: distinguish stable updates from beta history","summary":"SharkRF publishes separate stable and combined stable/beta firmware histories for openSPOT4. Both checked lists identify v93 as stable and describe a fix to the BrandMeister Manager key check. This is an undated maintenance reference, not a claim that v93 launched today. Use the notes to match a reported problem to a documented change before planning an update.","canonicalUrl":"https://www.sharkrf.com/products/openspot4/changelog/","topics":["digital-voice","remote-control"],"tags":["SharkRF","openSPOT4","openSPOT4 Pro","firmware","BrandMeister","DMR","stable","beta"],"kind":"Guide","maturity":"Reference","level":"Intermediate","sources":[{"label":"SharkRF openSPOT4 stable firmware changelog","url":"https://www.sharkrf.com/products/openspot4/changelog/","type":"Manufacturer","checkedAt":"2026-10-28T12:06:01.365Z","note":"Stable list shows v93 and the BrandMeister Manager key-check fix; no release date shown."},{"label":"SharkRF openSPOT4 stable and beta history","url":"https://www.sharkrf.com/products/openspot4/changelog/beta/","type":"Manufacturer","checkedAt":"2026-10-28T12:06:01.365Z","note":"Separately labels v93 stable and distinguishes earlier beta entries."}],"body":[{"heading":"Read the status beside the version","text":"The combined history includes both beta and stable entries. A higher version number alone does not establish its release status. Start with the exact device model and installed version, then follow the manufacturer's current update instructions."},{"heading":"Keep troubleshooting evidence specific","text":"Record the symptom, firmware version and affected network feature before changing software. Afterwards, repeat the same check. A documented fix is a developer claim about a particular issue; it does not establish that every connection problem has the same cause."}],"caveats":["No publication date was established for v93; sourcePublishedAt is intentionally unset.","No firmware was installed, radio operated or independent performance test conducted."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-28T12:06:01.365Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-28T12:06:05.176Z","updatedAt":"2026-10-28T12:06:05.176Z"},{"id":"shortwave-reception-log-and-qsl","title":"Turn a shortwave catch into a useful reception log","summary":"A good reception report explains what reached your receiver, when it happened and how well you could understand it. HFUnderground describes the QSL tradition: a station may acknowledge a listener's report with a card or message. The useful part comes before the reply—an orderly record of frequency, mode, UTC time, identification and programme clues. Apply the same discipline to licensed shortwave broadcasts and historical pirate-radio listening.","canonicalUrl":"https://www.hfunderground.com/wiki/index.php/QSL","topics":["sdr-discovery","hf-digital","portable-field"],"tags":["pirate radio","QSL","SINPO","shortwave","reception log"],"kind":"Guide","maturity":"Reference","level":"Beginner","sources":[{"label":"HFUnderground — QSL","url":"https://www.hfunderground.com/wiki/index.php/QSL","type":"Operator report","checkedAt":"2026-10-27T02:40:22.472Z","note":"Community explanation of reception reports, QSL practice, required report details and obsolete relay contact information."},{"label":"Ofcom — radio spectrum and the law","url":"https://www.ofcom.org.uk/spectrum/radio-equipment/radio-spectrum-and-the-law","type":"Official documentation","checkedAt":"2026-10-27T02:40:22.472Z","note":"UK-specific explanation of general reception, unauthorised interception and disclosure; not a statement of U.S. law."}],"body":[{"heading":"A repeatable listening exercise","text":"Write one line for each reception: UTC date and start/end time, frequency and units, mode, receiver, antenna, approximate listening region, and the words actually heard in an identification. Mark uncertain identifications as tentative. Record whether reception was local or through a remote receiver, so later comparisons use the correct location."},{"heading":"Report quality and protect context","text":"SIO describes signal strength, interference and overall quality; SINPO adds noise and propagation disturbance. Short plain-language notes can be more useful than an unexplained score. QSL replies are voluntary, and an old contact address may be obsolete. Check applicable reception and disclosure rules before sharing; this guide does not authorise publishing private communications."}],"caveats":["No reception was attempted for this entry. It is a suggested logging workflow, not a current station report.","Share only necessary contact information. Do not assume a QSL image or recorded programme is free to republish."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:40:22.472Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:51:17.094Z","updatedAt":"2026-10-27T02:51:17.094Z"},{"id":"skcc-slow-speed-cw","title":"Take CW practice on air with the Slow Speed Saunter","summary":"SKCC’s Slow Speed Saunter offers a monthly setting for relaxed CW conversations, open to licensed amateurs. The event has different key requirements for members and nonmembers. It can help bridge solo practice and on-air exchanges while keeping the pace manageable.","canonicalUrl":"https://www.skccgroup.com/operating_activities/slowspeed/","topics":["cw-morse","hf-digital","portable-field"],"tags":["CW","Morse","straight key","SKCC","Slow Speed Saunter","operating"],"kind":"Guide","maturity":"Reference","level":"Beginner","sources":[{"label":"SKCC: Slow Speed Saunter","url":"https://www.skccgroup.com/operating_activities/slowspeed/","type":"Official documentation","checkedAt":"2026-11-04T12:58:19.000Z","note":"Schedule and beginner guidance; explicit distinction between member and nonmember key requirements."},{"label":"SKCC: key policy","url":"https://www.skccgroup.com/keypolicy.php","type":"Official documentation","checkedAt":"2026-11-04T12:58:19.000Z","note":"Mechanically generated Morse requirement for club activities and policy exceptions."}],"body":[{"heading":"Prepare for a conversation","text":"Read the event page and club guidance, listen before calling, and choose a speed you can copy. Keep a short note of your own exchange information nearby. Treat a difficult contact as feedback about what to practice next; the purpose is comfortable participation rather than a high contact total."},{"heading":"Check the clock and key policy","text":"The schedule runs from 0000 to 2359 UTC on the first day of each month, with 12 WPM or slower encouraged. Members use a straight key, side-swiper or bug under the club policy. The event explicitly allows nonmembers to use any available key, while encouraging mechanical keys. That event-specific allowance does not change the general member policy."}],"caveats":["Confirm the event page and applicable rules before participating; no live activity is promised."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-11-04T12:58:19.000Z","sourcePublishedAt":null,"status":"published","revision":2,"createdAt":"2026-10-27T02:50:14.812Z","updatedAt":"2026-11-04T12:58:20.459Z"},{"id":"times-lmr-400-uf-flexible-coax","title":"LMR-400-UF: choose coax for both RF loss and movement","summary":"Times Microwave’s LMR-400-UF is a 50-ohm coaxial cable intended for applications needing greater flexibility than a rigid feed-line arrangement. The manufacturer describes a stranded center conductor and a flexible outer jacket, including use where repeated movement matters. This established product reference is useful when comparing a mast jumper, portable cable or equipment interconnect: frequency, length, routing and mechanical demands all belong in the decision.","canonicalUrl":"https://timesmicrowave.com/cables/lmr-400-uf-coax-cables/","topics":["antennas-diy","portable-field"],"tags":["Times Microwave","LMR-400-UF","coax","feed line","connectors"],"kind":"Guide","maturity":"Reference","level":"Intermediate","sources":[{"label":"LMR-400-UF manufacturer page","url":"https://timesmicrowave.com/cables/lmr-400-uf-coax-cables/","type":"Manufacturer","checkedAt":"2026-10-27T02:46:06.000Z","note":"Construction, application and specification resources."}],"body":[{"heading":"Compare the actual cable run","text":"Use the manufacturer’s attenuation data for the operating frequency and total cable length. A short flexible jumper and a long permanent feeder solve different problems. Include adapters and connectors in the plan, and compare the full assembly rather than assuming every cable with a similar diameter has identical loss."},{"heading":"Treat flexibility as a specification","text":"Check the stated bend radius, suitable connectors and environmental requirements before routing the cable. Flexibility does not remove the need for strain relief or careful handling at connector joints. Keep a record of the exact cable type so future repairs use compatible parts rather than a visually similar replacement."}],"caveats":["Established reference; no new launch claimed. Verify assembly ratings for the intended installation."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:46:06.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:49:30.624Z","updatedAt":"2026-10-27T02:49:30.624Z"},{"id":"uhf-satcom-pirates-and-status-evidence","title":"UHF SATCOM and satellite 'pirates': separate reception stories from spacecraft status","summary":"UHF satellite monitoring is a different subject from shortwave music broadcasting or an amateur-satellite contact. A 2015 report by operator PU2VLW describes receiving SSTV he attributed to FLTSATCOM-8. It is an individual historical report, not confirmation of a present signal. The Naval Postgraduate School's 2025 FLTSATCOM article supplies useful system history—and a reminder to read beyond a headline before declaring a satellite dead or active.","canonicalUrl":"https://nps.edu/-/the-last-telemetry-of-fltsatcom","topics":["space-radio","sdr-discovery"],"tags":["pirate radio","UHF SATCOM","FLTSATCOM","Bolinha","satellite history"],"kind":"Guide","maturity":"Historical","level":"Beginner","sources":[{"label":"Naval Postgraduate School — FLTSATCOM history","url":"https://nps.edu/-/the-last-telemetry-of-fltsatcom","type":"Official documentation","checkedAt":"2026-10-27T02:40:22.472Z","note":"September 11, 2025 account distinguishes a ground qualification model from orbiting satellites; no current status inferred."},{"label":"PU2VLW — historical SSTV reception report","url":"https://pu2vlw.wordpress.com/2015/04/04/recepcao-sstv-no-satelite-fltsatcom-8-bolinha/","type":"Operator report","checkedAt":"2026-10-27T02:40:22.472Z","note":"April 2015 firsthand reception account attributed to its author; identification and legal commentary are not independently established."},{"label":"Ofcom — reception and disclosure rules","url":"https://www.ofcom.org.uk/spectrum/radio-equipment/radio-spectrum-and-the-law","type":"Official documentation","checkedAt":"2026-10-27T02:40:22.472Z","note":"UK-specific reception/disclosure boundaries illustrate why receiver capability does not itself establish permission."}],"body":[{"heading":"The ground-model distinction","text":"NPS's 'Last Telemetry' story concerns a ground qualification model used for student education. Its final laboratory exercise does not establish that every spacecraft in orbit stopped operating. The article separately described the orbital system as it stood in September 2025. Neither statement supplies a live operational check for a listening session today."},{"heading":"Identify cautiously","text":"A voice, image or strong carrier alone does not establish which spacecraft relayed it, who originated it, or whether the transmission was authorised. Keep observations separate from conclusions and check dated primary records. Military satellite systems are not amateur repeaters. Any listening or sharing must comply with the applicable rules; use authorised amateur satellites for amateur contacts."}],"caveats":["No current activity, orbital status, receiving direction or spacecraft identification is asserted here.","The old operator report's speculation that military use had ended is not adopted. No intercepted images or audio are copied into this library."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:40:22.472Z","sourcePublishedAt":"2025-09-11T00:00:00.000Z","status":"published","revision":1,"createdAt":"2026-10-27T02:51:24.388Z","updatedAt":"2026-10-27T02:51:24.388Z"},{"id":"unne-1b-telemetry-and-commissioning","title":"UNNE-1B: follow telemetry while repeater testing continues","summary":"Nebrija University's UNNE-1B educational mission page reports an October 1, 2026 launch and reception of satellite data from October 4. AMSAT's list updated October 31 still places UNNE-1B, also called HADES-E2, in testing. Its telemetry and learning materials offer a receiving project; those milestones do not establish that the voice repeater is available for general use.","canonicalUrl":"https://www.nebrija.com/unne1b/en/index.html","topics":["space-radio","sdr-discovery"],"tags":["UNNE-1B","HADES-E2","AMSAT-EA","Nebrija","telemetry","FSK","commissioning"],"kind":"Guide","maturity":"Experimental","level":"Intermediate","sources":[{"label":"Nebrija University — UNNE-1B mission","url":"https://www.nebrija.com/unne1b/en/index.html","type":"Official documentation","checkedAt":"2026-11-01T12:58:57.000Z","note":"Mission participant's launch and reception account, telemetry overview and educational modules; page publication date not established."},{"label":"AMSAT — testing, upcoming and unknown satellites","url":"https://www.amsat.org/upcoming-satellites/","type":"Official documentation","checkedAt":"2026-11-01T12:58:57.000Z","note":"October 31, 2026 update lists UNNE-1B (HADES-E2) under In Testing."}],"body":[{"heading":"Separate reception from repeater readiness","text":"The university describes telemetry-only operation before the transponder is enabled by the operator. A received packet can therefore be useful evidence of satellite activity without showing that two-way voice contacts are available. Check a current operator notice before planning that activity."},{"heading":"Use the learning materials","text":"The mission site links explanations of signals, receiver setup and packet structure, including an educational game payload. Begin with those original resources and keep observation time, receiver settings and decoding results together. This library has not received or decoded the satellite."}],"caveats":["Experimental: commissioning status can change. Published frequencies and pass predictions do not guarantee reception or authorize transmission.","Launch and first-reception dates are event dates; sourcePublishedAt remains unset because the mission page's publication date was not established."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-11-01T12:58:57.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-11-01T12:59:19.687Z","updatedAt":"2026-11-01T12:59:19.687Z"},{"id":"w1aw-cw-practice-files","title":"Practice copying CW with W1AW audio and matching text","summary":"ARRL’s W1AW practice library pairs Morse audio with the text used to generate it, allowing you to check what you copied after listening. The collection offers multiple speeds rather than one recording for everyone. Its lower-speed files use Farnsworth spacing: characters retain a quicker rhythm while extra gaps slow the overall exercise. This is useful practice material alongside a course, mentor or club contact.","canonicalUrl":"https://www.arrl.org/code-practice-files","topics":["cw-morse","hf-digital"],"tags":["CW","Morse","W1AW","copying","Farnsworth","practice"],"kind":"Guide","maturity":"Reference","level":"Beginner","sources":[{"label":"ARRL: W1AW code-practice files","url":"https://www.arrl.org/code-practice-files","type":"Official documentation","checkedAt":"2026-10-27T02:36:31.000Z","note":"Practice MP3s, matching text, speed choices and Farnsworth spacing; visible files are dated March 2026."}],"body":[{"heading":"Try a short copy-and-check session","text":"Choose a speed you can follow for a short passage. Write or type what you hear, then compare with the matching source text. Record the characters or word endings that caused trouble and revisit a manageable section. Increasing speed is less useful than finding which sounds you consistently confuse."},{"heading":"Keep the recording’s context","text":"Use ARRL’s links for listening or permitted personal downloads; the library does not mirror its audio or QST-derived text. Check each file’s date and speed. The page inspected displayed March 2026 practice material, so this entry does not describe those files as a newly released October lesson."}],"caveats":["This is a practice method, not a measured learning-speed claim."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:36:31.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:50:07.967Z","updatedAt":"2026-10-27T02:50:07.967Z"},{"id":"wio-tracker-l2-pro-device","title":"Wio Tracker L2 Pro: messages and offline maps without a phone","summary":"Seeed's Wio Tracker L2 Pro combines a 3.2-inch touchscreen, an ESP32-S3 processor, LoRa and satellite positioning in a standalone Meshtastic device. The Meshtastic hardware guide confirms support for messaging and map display without a phone, using a memory card for offline maps. It is a useful product to investigate when a group wants a self-contained field messenger instead of keeping every node tethered to a phone.","canonicalUrl":"https://meshtastic.org/docs/hardware/devices/seeed-studio/wio-series/tracker-l2-pro/","topics":["mesh-radio","maps-tracking","portable-field"],"tags":["Wio Tracker L2 Pro","Seeed","Meshtastic","touchscreen","offline maps","GNSS","Product guide"],"kind":"Guide","maturity":"Reference","level":"Beginner","sources":[{"label":"Meshtastic Wio Tracker L2 Pro hardware guide","url":"https://meshtastic.org/docs/hardware/devices/seeed-studio/wio-series/tracker-l2-pro/","type":"Official documentation","checkedAt":"2026-10-27T02:36:30.000Z","note":"Confirms processor, screen, GNSS and standalone messaging/offline maps."},{"label":"Seeed Wio Tracker L2 introduction","url":"https://wiki.seeedstudio.com/meshtastic_wio_tracker_l2_intro/","type":"Manufacturer","checkedAt":"2026-10-27T02:36:30.000Z","note":"Manufacturer hardware specification and map-storage description; update date is not a launch date."}],"body":[{"heading":"What changes in the field","text":"The screen brings messages and positioning onto the node itself. Seeed documents Wi-Fi, Bluetooth, a microSD slot and a 3000 mAh battery. Our suggested comparison is practical: decide whether on-device reading and navigation are worth carrying a larger screen-based unit, then compare the complete kit rather than just the processor."},{"heading":"Prepare before leaving coverage","text":"Load the map area beforehand and confirm that the map remains available without an internet connection. Check the exact firmware target, region and group settings in the official guides. A GNSS fix establishes the device's position; it does not prove that another node received a message or location update."}],"caveats":["The documentation was checked; no battery-life, radio-range or touchscreen testing was performed here.","A launch date was not established. This is a product guide, not a claim of a new October release."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:36:30.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:50:38.947Z","updatedAt":"2026-10-27T02:50:38.947Z"},{"id":"wireguard-radio-network-boundary","title":"WireGuard for a remote station: define the network boundary first","summary":"WireGuard connects trusted peers through an encrypted IP tunnel using public and private keys. That can be useful when a remote operator needs a controlled route into a station network. It does not itself provide radio control, audio, station power recovery or operating authorization. Begin with a drawing of the specific devices and services you need to reach, then use the official overview and quick start to understand the tunnel configuration.","canonicalUrl":"https://www.wireguard.com/quickstart/","topics":["remote-control","antennas-diy"],"tags":["WireGuard","VPN","remote station","networking","keys","access control"],"kind":"Guide","maturity":"Reference","level":"Intermediate","sources":[{"label":"WireGuard Quick Start","url":"https://www.wireguard.com/quickstart/","type":"Developer","checkedAt":"2026-10-27T02:36:30.000Z","note":"Documents peer configuration, private keys, keepalives and the demonstration-only setup."},{"label":"WireGuard conceptual overview","url":"https://www.wireguard.com/","type":"Developer","checkedAt":"2026-10-27T02:36:30.000Z","note":"Explains public-key peers, tunnel addresses and cryptokey routing."}],"body":[{"heading":"Decide what each peer can reach","text":"The official documentation associates peer public keys with allowed tunnel addresses. Our recommendation is to start with only the station destinations required for your task, alongside appropriate host and network firewall rules. Keep private keys private, record which device owns each configuration, and have a way to remove a lost device's access."},{"heading":"Test network access separately from radio control","text":"A recent tunnel handshake or successful network request is only one stage of the station check. Verify the radio application's authentication, audio and safe shutdown behavior separately. The quick start discusses keepalives for some NAT situations; they are a connectivity option, not a general requirement or a cure for every firewall problem."}],"caveats":["This is a planning guide, not a tested configuration for a particular radio, router or internet provider.","The official demonstration server is for testing; do not use demonstration credentials or insecure setup shortcuts for a production station."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:36:30.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:51:00.165Z","updatedAt":"2026-10-27T02:51:00.165Z"},{"id":"wsjtx-weak-signal-start","title":"FT8 and beyond: the WSJT-X starting point","summary":"WSJT-X connects familiar HF station skills with computer-assisted weak-signal operating. The official project covers FT8 and FT4 contacts, WSPR propagation experiments, and modes for meteor scatter and moonbounce. Begin with the project's own downloads and user guide, then choose a mode for the activity you want to try. The library entry is an orientation resource, with official documentation kept one click away.","canonicalUrl":"https://wsjtx.github.io/wsjtx/index.html","topics":["hf-digital","sdr-discovery"],"tags":["FT8","FT4","WSPR","WSJT-X","HF","Windows","macOS","Linux"],"kind":"Guide","maturity":"Reference","level":"Beginner","sources":[{"label":"WSJT-X official project","url":"https://wsjtx.github.io/wsjtx/index.html","type":"Official documentation","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."}],"body":[],"caveats":["The official homepage distinguishes full releases from development versions; check the release notes before installing.","No station or software installation was tested here."],"reactions":[],"media":{"src":"/hot-topics-media/icom705.jpg","alt":"ICOM IC-705 (illustrative equipment photograph).","credit":"Batchman99 / Wikimedia Commons","license":"CC BY-SA 4.0","licenseUrl":"https://creativecommons.org/licenses/by-sa/4.0/","sourceUrl":"https://commons.wikimedia.org/wiki/File:ICOM_IC-705.jpg"},"attachments":[{"label":"Radcom signal observation worksheet (TXT, v2)","url":"/hot-topics-downloads/signal-observation.txt","hosted":true,"license":"Radcom original · CC BY 4.0"}],"checkedAt":"2026-10-27T00:18:03.810Z","sourcePublishedAt":null,"status":"published","revision":2,"createdAt":"2026-10-27T00:44:48.901Z","updatedAt":"2026-10-27T02:12:02.591Z"},{"id":"yaesu-ftx1-field-optima","title":"Yaesu FTX-1 Field and optima: compare the complete configurations","summary":"Yaesu’s FTX-1 family combines HF, 50 MHz, 144 MHz and 430 MHz operation with a detachable field-oriented radio head. The Field package includes its battery; optima adds the SPA-1 amplifier for a base-station arrangement. Yaesu distinguishes battery output from externally powered output, so compare complete configurations rather than reading the largest power number as a capability of every portable setup.","canonicalUrl":"https://yaesu.com/product-detail.aspx?CatName=HF+Transceivers/Amplifiers&Model=FTX-1+Series","topics":["portable-field","hf-digital","digital-voice","cw-morse"],"tags":["Yaesu","FTX-1","Field","optima","C4FM","portable radio","product spotlight"],"kind":"Guide","maturity":"Reference","level":"Intermediate","sources":[{"label":"Yaesu FTX-1 series product page","url":"https://yaesu.com/product-detail.aspx?CatName=HF+Transceivers/Amplifiers&Model=FTX-1+Series","type":"Manufacturer","checkedAt":"2026-10-27T02:40:23.000Z","note":"Field/optima packages, battery/external power distinctions and supported modes."},{"label":"Yaesu FTX-1 operating manual","url":"https://www.yaesu.com/Files/4CB893D7-1018-01AF-FA97E9E9AD48B50C/FTX-1_OM_ENG_EH084M201_2506E-DS.pdf","type":"Manufacturer","checkedAt":"2026-10-27T02:40:23.000Z","note":"Operating configurations, battery duty-cycle context and optional tuner."}],"body":[{"heading":"Match the package to the outing","text":"The manufacturer lists 6 W operation from the supplied battery and up to 10 W from an external 13.8 V supply for the field head. Decide whether your priority is a compact battery station, a higher-power home configuration, or moving between the two."},{"heading":"Count the supporting equipment","text":"Check which tuner, cooling and antenna accessories are included or optional for the exact package. Yaesu’s battery-runtime figures use stated duty cycles, so they are not a promise for continuous transmission or your chosen digital mode. Use the manual to plan the actual station."}],"caveats":["Product reference; no first-release date or present stock guarantee is asserted.","Published battery and power figures are manufacturer specifications, not results from a field test."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:40:23.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:48:39.719Z","updatedAt":"2026-10-27T02:48:39.719Z"}],"revisions":[{"resourceId":"airspy-ranger-development-watch","revision":1,"reason":"User-requested source-checked library expansion; original factual summary with source dates and product-status caveats.","createdAt":"2026-10-27T02:48:26.772Z","record":{"id":"airspy-ranger-development-watch","title":"Airspy Ranger development watch: the 2025 prototype update","summary":"Airspy’s Ranger page describes an SDR receiver intended to extend its HF+ approach into wider coverage, with a listed target spanning 0.5 kHz to 2.6 GHz. Crucially, the page’s dated June 6, 2025 update discusses working samples and production optimization. That is evidence of development, not proof of current retail shipment. Keep Ranger on a watchlist until availability and final specifications are independently established.","canonicalUrl":"https://airspy.com/airspy-ranger/","topics":["sdr-discovery","hf-digital"],"tags":["Airspy","Ranger","receiver","development watch","prototype","product announcement"],"kind":"News","maturity":"Experimental","level":"Intermediate","sources":[{"label":"Airspy Ranger development and architecture page","url":"https://airspy.com/airspy-ranger/","type":"Manufacturer","checkedAt":"2026-10-27T02:40:23.000Z","note":"June 6, 2025 sample update, design goals and proposed coverage."}],"body":[{"heading":"Look beyond the tuning range","text":"Airspy emphasizes front-end filtering, automatic gain control and handling of strong signals. Those design goals address a different question from the headline tuning range: whether a weak desired signal remains usable around powerful unwanted signals. They remain manufacturer performance statements."},{"heading":"What would move this forward","text":"Before planning a station around Ranger, look for a dated shipping notice, a final manual, supported software and an actual seller listing. Keep the development update’s date visible rather than presenting an old prototype milestone as this week’s launch."}],"caveats":["Development status: the reviewed page did not establish current shipment.","No independent measurements or purchase availability were verified."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:40:23.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:48:26.772Z","updatedAt":"2026-10-27T02:48:26.772Z"}},{"resourceId":"amsat-satellite-primer","revision":1,"reason":"Initial collection: primary-source research checked October 26, 2026.","createdAt":"2026-10-27T00:44:47.408Z","record":{"id":"amsat-satellite-primer","title":"Learn satellite tracking, Doppler, and operating basics","summary":"AMSAT links a freely downloadable compilation of Keith Baker's introductory satellite articles. It explains concepts such as finding a pass, interpreting orbital data, listening for beacons, and allowing for Doppler shift. Keep it as a foundation resource alongside current satellite-status and frequency information. AMSAT itself cautions that the articles' equipment, satellites, and links can age, so the library should preserve the historical context rather than present every example as current.","canonicalUrl":"https://www.amsat.org/introduction-to-working-amateur-satellites/","topics":["space-radio","portable-field"],"tags":["AMSAT","satellites","Doppler","tracking","PDF"],"kind":"Manual","maturity":"Historical","level":"Beginner","sources":[{"label":"AMSAT beginner resources","url":"https://www.amsat.org/introduction-to-working-amateur-satellites/","type":"Official documentation","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."},{"label":"For Beginners: An Amateur Radio Satellite Primer","url":"https://www.amsat.org/wordpress/wp-content/uploads/2023/06/For_Beginners_Compilation.pdf","type":"Official documentation","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."}],"body":[],"caveats":["The articles appeared during 2019–2021. Treat named satellite availability and equipment details as historical until checked."],"reactions":[],"media":{"src":"/hot-topics-media/iss2010.jpg","alt":"ISS photographed after STS-132 undocking (archival photograph, May 2010).","credit":"NASA / Crew of STS-132","license":"Public domain in the United States (NASA)","licenseUrl":"https://www.nasa.gov/nasa-brand-center/images-and-media/","sourceUrl":"https://commons.wikimedia.org/wiki/File:International_Space_Station_after_undocking_of_STS-132.jpg"},"attachments":[{"label":"AMSAT satellite primer (PDF)","url":"https://www.amsat.org/wordpress/wp-content/uploads/2023/06/For_Beginners_Compilation.pdf","hosted":false,"license":"Original source; no mirrored copy"},{"label":"Radcom field-session checklist (TXT)","url":"/hot-topics-downloads/field-checklist.txt","hosted":true,"license":"Radcom original · CC BY 4.0"}],"checkedAt":"2026-10-27T00:18:03.810Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T00:44:47.408Z","updatedAt":"2026-10-27T00:44:47.408Z"}},{"resourceId":"amsat-satellite-primer","revision":2,"reason":"Worksheet reuse notice clarified (v2); factual source checks unchanged.","createdAt":"2026-10-27T02:12:44.385Z","record":{"id":"amsat-satellite-primer","title":"Learn satellite tracking, Doppler, and operating basics","summary":"AMSAT links a freely downloadable compilation of Keith Baker's introductory satellite articles. It explains concepts such as finding a pass, interpreting orbital data, listening for beacons, and allowing for Doppler shift. Keep it as a foundation resource alongside current satellite-status and frequency information. AMSAT itself cautions that the articles' equipment, satellites, and links can age, so the library should preserve the historical context rather than present every example as current.","canonicalUrl":"https://www.amsat.org/introduction-to-working-amateur-satellites/","topics":["space-radio","portable-field"],"tags":["AMSAT","satellites","Doppler","tracking","PDF"],"kind":"Manual","maturity":"Historical","level":"Beginner","sources":[{"label":"AMSAT beginner resources","url":"https://www.amsat.org/introduction-to-working-amateur-satellites/","type":"Official documentation","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."},{"label":"For Beginners: An Amateur Radio Satellite Primer","url":"https://www.amsat.org/wordpress/wp-content/uploads/2023/06/For_Beginners_Compilation.pdf","type":"Official documentation","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."}],"body":[],"caveats":["The articles appeared during 2019–2021. Treat named satellite availability and equipment details as historical until checked."],"reactions":[],"media":{"src":"/hot-topics-media/iss2010.jpg","alt":"ISS photographed after STS-132 undocking (archival photograph, May 2010).","credit":"NASA / Crew of STS-132","license":"Public domain in the United States (NASA)","licenseUrl":"https://www.nasa.gov/nasa-brand-center/images-and-media/","sourceUrl":"https://commons.wikimedia.org/wiki/File:International_Space_Station_after_undocking_of_STS-132.jpg"},"attachments":[{"label":"AMSAT satellite primer (PDF)","url":"https://www.amsat.org/wordpress/wp-content/uploads/2023/06/For_Beginners_Compilation.pdf","hosted":false,"license":"Original source; no mirrored copy"},{"label":"Radcom field-session checklist (TXT, v2)","url":"/hot-topics-downloads/field-checklist.txt","hosted":true,"license":"Radcom original · CC BY 4.0"}],"checkedAt":"2026-10-27T00:18:03.810Z","sourcePublishedAt":null,"status":"published","revision":2,"createdAt":"2026-10-27T00:44:47.408Z","updatedAt":"2026-10-27T02:12:44.385Z"}},{"resourceId":"aprs-maps-messages-basics","revision":1,"reason":"User-requested ten-shelf expansion: mesh hardware, mapping, field networks and satellite learning; source-checked original guidance.","createdAt":"2026-10-27T02:50:52.798Z","record":{"id":"aprs-maps-messages-basics","title":"APRS: understand the packets behind the map","summary":"APRS carries positions, weather, objects, status information and messages; its original designer explicitly described a broader purpose than vehicle tracking. A map is one view of that information. For a club outing, understanding where a report came from matters as much as seeing its symbol. A position arriving through an internet service does not by itself demonstrate a working radio path from your station to the other operator.","canonicalUrl":"https://www.aprs.org/aprs.html","topics":["maps-tracking","portable-field","remote-control"],"tags":["APRS","APRS-IS","iGate","packet radio","maps","position privacy"],"kind":"Guide","maturity":"Reference","level":"Beginner","sources":[{"label":"Bob Bruninga APRS overview","url":"https://www.aprs.org/aprs.html","type":"Developer","checkedAt":"2026-10-27T02:36:30.000Z","note":"Original designer explains APRS information exchange beyond position tracking."},{"label":"aprs.fi iOS developer guide","url":"https://ios-guide.aprs.fi/","type":"Developer","checkedAt":"2026-10-27T02:36:30.000Z","note":"Documents RF versus network paths, acknowledgements, position history and public messaging."}],"body":[{"heading":"Separate radio reception from internet delivery","text":"The aprs.fi developer guide distinguishes reports received through a radio/TNC from network data. It also explains that a receive-only gateway can forward packets toward the internet without providing a return radio path. When testing a message, look for its actual acknowledgement and record how each end connected rather than assuming a visible map pin proves two-way service."},{"heading":"Plan what you are willing to publish","text":"APRS-IS positions and messages are public, and other services may retain them after local deletion. Agree on group privacy expectations before enabling position beacons. For ordinary map reading, inspect the report time and source: an old or estimated position should not be treated as a fresh observation of a person's whereabouts."}],"caveats":["The original APRS site contains historical material; this entry uses its foundational explanation, not old event notices.","This is not a private messenger or a guaranteed emergency-delivery service."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:36:30.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:50:52.798Z","updatedAt":"2026-10-27T02:50:52.798Z"}},{"resourceId":"aredn-october-2026-rc","revision":1,"reason":"Initial collection: primary-source research checked October 26, 2026.","createdAt":"2026-10-27T00:44:50.569Z","record":{"id":"aredn-october-2026-rc","title":"AREDN's October release candidate: a testing checklist","summary":"AREDN's October release-candidate page asks operators to test radio, tunnel and network changes before a stable release is selected. It covers multiple-radio operation, channel selection, migration behavior and a reboot issue affecting some MikroTik hardware. This is a useful checklist for a test node and for coordinating upgrades with neighboring stations on an existing broadband amateur-radio network.","canonicalUrl":"https://www.arednmesh.org/content/release-candidate-october-2026","topics":["mesh-radio","remote-control"],"tags":["AREDN","broadband mesh","release candidate","networking","MikroTik"],"kind":"News","maturity":"Experimental","level":"Intermediate","sources":[{"label":"AREDN release-candidate notes","url":"https://www.arednmesh.org/content/release-candidate-october-2026","type":"Official documentation","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."},{"label":"AREDN documentation","url":"https://docs.arednmesh.org/en/latest/index.html","type":"Official documentation","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."}],"body":[],"caveats":["Label this testing software, not a final stable release.","The project asks users to back up configuration and identify the precise build when reporting problems.","AREDN broadband networking and LoRa messaging have different hardware and network requirements."],"reactions":[],"media":null,"attachments":[{"label":"Radcom mesh field-test worksheet (TXT)","url":"/hot-topics-downloads/mesh-field-test.txt","hosted":true,"license":"Radcom original · CC BY 4.0"}],"checkedAt":"2026-10-27T00:18:03.810Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T00:44:50.569Z","updatedAt":"2026-10-27T00:44:50.569Z"}},{"resourceId":"aredn-october-2026-rc","revision":2,"reason":"Worksheet reuse notice clarified (v2); factual source checks unchanged.","createdAt":"2026-10-27T02:11:17.631Z","record":{"id":"aredn-october-2026-rc","title":"AREDN's October release candidate: a testing checklist","summary":"AREDN's October release-candidate page asks operators to test radio, tunnel and network changes before a stable release is selected. It covers multiple-radio operation, channel selection, migration behavior and a reboot issue affecting some MikroTik hardware. This is a useful checklist for a test node and for coordinating upgrades with neighboring stations on an existing broadband amateur-radio network.","canonicalUrl":"https://www.arednmesh.org/content/release-candidate-october-2026","topics":["mesh-radio","remote-control"],"tags":["AREDN","broadband mesh","release candidate","networking","MikroTik"],"kind":"News","maturity":"Experimental","level":"Intermediate","sources":[{"label":"AREDN release-candidate notes","url":"https://www.arednmesh.org/content/release-candidate-october-2026","type":"Official documentation","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."},{"label":"AREDN documentation","url":"https://docs.arednmesh.org/en/latest/index.html","type":"Official documentation","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."}],"body":[],"caveats":["Label this testing software, not a final stable release.","The project asks users to back up configuration and identify the precise build when reporting problems.","AREDN broadband networking and LoRa messaging have different hardware and network requirements."],"reactions":[],"media":null,"attachments":[{"label":"Radcom mesh field-test worksheet (TXT, v2)","url":"/hot-topics-downloads/mesh-field-test.txt","hosted":true,"license":"Radcom original · CC BY 4.0"}],"checkedAt":"2026-10-27T00:18:03.810Z","sourcePublishedAt":null,"status":"published","revision":2,"createdAt":"2026-10-27T00:44:50.569Z","updatedAt":"2026-10-27T02:11:17.631Z"}},{"resourceId":"ariss-school-contact-listening","revision":1,"reason":"Add a listener guide to direct and telebridge school contacts using the official November 5 schedule as a dated example.","createdAt":"2026-11-07T13:06:49.254Z","record":{"id":"ariss-school-contact-listening","title":"Listening to an ISS school contact","summary":"The school named in an ARISS announcement can be thousands of kilometres from the ground station speaking to the International Space Station. The contact type tells you where the radio link begins. Use the scheduled time and your own location to decide whether to try a receiver or follow a public stream.","canonicalUrl":"https://www.ariss.org/about-ariss-contacts.html","topics":["space-radio","remote-control"],"tags":["ARISS","ISS","telebridge","pass planning","school contacts"],"kind":"Guide","maturity":"Reference","level":"Beginner","sources":[{"label":"ARISS — About ARISS Contacts","url":"https://www.ariss.org/about-ariss-contacts.html","type":"Official documentation","checkedAt":"2026-11-07T13:06:00.000Z","note":"Describes direct, telebridge and virtual contacts and public listening options. Publication date unspecified."},{"label":"ARISS — Upcoming Educational Contacts","url":"https://www.ariss.org/upcoming-educational-contacts.html","type":"Official documentation","checkedAt":"2026-11-07T13:06:00.000Z","note":"November 5, 2026 schedule lists the two planned contacts. Event notices also explain reception within the ISS footprint."}],"body":[{"heading":"Find the ground station","text":"For a direct contact, the school hosts the radio station. For a telebridge, a separate ARISS station talks to the ISS and passes the audio to the school by telephone. To hear the astronaut over the air, your receiver must be within reach of the ISS downlink during that ground station’s pass. Check the event notice for the listening frequency and compare the UTC time with an ISS pass prediction for your location."},{"heading":"Read a dated schedule","text":"The November 5, 2026 schedule paired a school in Sparks, Nevada, with ground station IK1SLD for November 10 at 18:16 UTC. It paired a school in Halifax, Nova Scotia, with VK4ISS for November 13 at 18:07 UTC. These were scheduled starts, rounded to the minute. The Sparks listing also pointed listeners to a school livestream."}],"caveats":["Recheck the event notice shortly before listening. A published schedule alone cannot confirm that a contact took place.","If you follow an official stream, identify it as the source of your listening report. For over-the-air reception, log your own UTC time and what you could hear."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-11-07T13:06:00.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-11-07T13:06:49.254Z","updatedAt":"2026-11-07T13:06:49.254Z"}},{"resourceId":"ariss-sstv-receive-prepare","revision":1,"reason":"User-requested ten-shelf expansion: mesh hardware, mapping, field networks and satellite learning; source-checked original guidance.","createdAt":"2026-10-27T02:50:35.947Z","record":{"id":"ariss-sstv-receive-prepare","title":"Prepare for an ISS SSTV session without waiting for a live pass","summary":"SSTV sends pictures through an audio signal that software converts into an image. ARISS provides reception guidance, a gallery of dated submissions and a sample recording with a corresponding image for checking a receiving setup. These resources let you rehearse the audio-to-decoder path before a scheduled ISS event. An archived picture is evidence of a past reception, not evidence that a transmission is underway now.","canonicalUrl":"https://ariss-usa.org/ARISS_SSTV/faq.php","topics":["space-radio","sdr-discovery","portable-field"],"tags":["ISS","ARISS","SSTV","image decoding","receive only","practice"],"kind":"Guide","maturity":"Reference","level":"Beginner","sources":[{"label":"ARISS: SSTV frequently asked questions","url":"https://ariss-usa.org/ARISS_SSTV/faq.php","type":"Official documentation","checkedAt":"2026-10-27T02:36:31.000Z","note":"Reception workflow, event-specific mode/frequency guidance, SuitSat test audio and submission review."},{"label":"ARISS: SSTV gallery","url":"https://ariss-usa.org/ARISS_SSTV/","type":"Official documentation","checkedAt":"2026-10-27T02:36:31.000Z","note":"Received images are associated with missions and acquisition timestamps, including October 2026 submissions."}],"body":[{"heading":"Rehearse the audio path","text":"Use the official sample recording and compare your decoded result with its reference image. Check audio routing and level before adding the moving satellite to the problem. When an event is announced, verify its actual mode and downlink instructions rather than reusing settings from a different mission."},{"heading":"Read dates before chasing images","text":"Use the gallery’s mission and acquisition timestamps to understand what was received. ARISS reviews submissions, so appearing in a gallery is not instantaneous. Keep source images at their original page unless separate reuse terms permit copying. Check the current operations notice again before planning a pass."}],"caveats":["No SSTV event is represented as live, and no image was decoded during this research.","Mode and frequency details in an event FAQ can change between missions."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:36:31.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:50:35.947Z","updatedAt":"2026-10-27T02:50:35.947Z"}},{"resourceId":"ariss-station-status","revision":1,"reason":"Initial collection: primary-source research checked October 26, 2026.","createdAt":"2026-10-27T00:44:47.627Z","record":{"id":"ariss-station-status","title":"Check the ISS radio before planning a pass","summary":"ARISS maintains an operating-status page for the amateur stations aboard the International Space Station. It distinguishes voice, packet, television, and occasional SSTV activity and links to further updates. The page also explains that radios can be switched off for station activities such as spacewalks and visiting vehicles. Make it a pre-pass reference alongside your prediction tool, and check the source's own update date before relying on a listed mode.","canonicalUrl":"https://www.ariss.org/current-status-of-iss-stations.html","topics":["space-radio","maps-tracking"],"tags":["ISS","ARISS","SSTV","APRS","satellites","status"],"kind":"Guide","maturity":"Reference","level":"Beginner","sources":[{"label":"ARISS Current Status of ISS Stations","url":"https://www.ariss.org/current-status-of-iss-stations.html","type":"Official documentation","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."}],"body":[],"caveats":["The page read on October 26 is labeled status as of October 7, 2026. A fresh fetch is not a live equipment check.","Do not represent any SSTV event as currently underway from this evergreen resource.","No live reception was attempted."],"reactions":[],"media":{"src":"/hot-topics-media/iss2010.jpg","alt":"ISS photographed after STS-132 undocking (archival photograph, May 2010).","credit":"NASA / Crew of STS-132","license":"Public domain in the United States (NASA)","licenseUrl":"https://www.nasa.gov/nasa-brand-center/images-and-media/","sourceUrl":"https://commons.wikimedia.org/wiki/File:International_Space_Station_after_undocking_of_STS-132.jpg"},"attachments":[],"checkedAt":"2026-10-27T00:18:03.810Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T00:44:47.627Z","updatedAt":"2026-10-27T00:44:47.627Z"}},{"resourceId":"ariss-station-status","revision":2,"reason":"Refresh from ARISS October 27 status notice; replace stale October 7 caveat and add provisional October 28–30 EVA interruption.","createdAt":"2026-10-27T12:01:54.531Z","record":{"id":"ariss-station-status","title":"Check the ISS radio before planning a pass","summary":"ARISS's status notice dated October 27, 2026 lists the Columbus voice repeater and Zvezda APRS station, with planned shutdowns for spacewalk support on October 28–30. Use this dated notice alongside pass predictions, then check again before listening. A published operating plan is not a live reception report.","canonicalUrl":"https://www.ariss.org/current-status-of-iss-stations.html","topics":["space-radio","maps-tracking"],"tags":["ISS","ARISS","SSTV","APRS","satellites","status"],"kind":"Guide","maturity":"Reference","level":"Beginner","sources":[{"label":"ARISS Current Status of ISS Stations","url":"https://www.ariss.org/current-status-of-iss-stations.html","type":"Official documentation","checkedAt":"2026-10-27T12:01:45.660Z","note":"October 27 status notice; distinguishes Columbus and Zvezda planned EVA shutdown/restart times. Times are provisional."}],"body":[{"heading":"Planned interruption: October 28–30, 2026","text":"ARISS expects Columbus to power down October 28 at 19:20 UTC and return October 30 at 07:45 UTC. Zvezda's corresponding times are 19:25 UTC and 07:50 UTC. These are scheduled times, subject to change; restoration is not confirmed in advance."},{"heading":"Match the station to the activity","text":"The notice lists Columbus in voice-repeater mode and Zvezda APRS active while troubleshooting continues. SSTV is a separately announced activity. Check the source's date and operating mode before choosing a pass; silence during a planned outage need not indicate a fault in your receiver."}],"caveats":["Status notice dated October 27, 2026; schedules and modes may change.","No live reception or restoration was verified. No SSTV event is claimed to be underway."],"reactions":[],"media":{"src":"/hot-topics-media/iss2010.jpg","alt":"ISS photographed after STS-132 undocking (archival photograph, May 2010).","credit":"NASA / Crew of STS-132","license":"Public domain in the United States (NASA)","licenseUrl":"https://www.nasa.gov/nasa-brand-center/images-and-media/","sourceUrl":"https://commons.wikimedia.org/wiki/File:International_Space_Station_after_undocking_of_STS-132.jpg"},"attachments":[],"checkedAt":"2026-10-27T12:01:45.660Z","sourcePublishedAt":null,"status":"published","revision":2,"createdAt":"2026-10-27T00:44:47.627Z","updatedAt":"2026-10-27T12:01:54.531Z"}},{"resourceId":"ariss-station-status","revision":3,"reason":"November 5 primary-source maintenance: replace superseded October operating plan with ARISS November 4 notice, preserve activity guidance and archival NASA attribution unchanged; no live status inference or new assets.","createdAt":"2026-11-05T13:03:58.504Z","record":{"id":"ariss-station-status","title":"Check the ISS radio before planning a pass","summary":"ARISS's November 4, 2026 status notice schedules Columbus and Zvezda radio interruptions for spacewalk support on November 4–6. Check that notice alongside pass predictions before listening. The planned restart times do not confirm that either radio has returned to service.","canonicalUrl":"https://www.ariss.org/current-status-of-iss-stations.html","topics":["space-radio","maps-tracking"],"tags":["ISS","ARISS","SSTV","APRS","satellites","status"],"kind":"Guide","maturity":"Reference","level":"Beginner","sources":[{"label":"ARISS Current Status of ISS Stations","url":"https://www.ariss.org/current-status-of-iss-stations.html","type":"Official documentation","checkedAt":"2026-11-05T13:03:57.000Z","note":"November 4 status notice; separate Columbus and Zvezda planned EVA interruptions. Scheduled restarts are not verified reception."}],"body":[{"heading":"Planned interruption: November 4–6, 2026","text":"The notice schedules Columbus power-down for November 4 at 14:30 UTC and restart for November 6 at 10:15 UTC. Zvezda's corresponding times are 14:35 UTC and 10:20 UTC. All times are provisional; this entry does not independently confirm shutdown or restoration."},{"heading":"Match the station to the activity","text":"The notice lists Columbus in voice-repeater mode and Zvezda APRS active while troubleshooting continues. SSTV is a separately announced activity. Check the source's date and operating mode before choosing a pass; silence during a planned outage need not indicate a fault in your receiver."}],"caveats":["Status notice dated November 4, 2026; schedules and modes may change.","No live reception or restoration was verified. No SSTV event is claimed to be underway."],"reactions":[],"media":{"src":"/hot-topics-media/iss2010.jpg","alt":"ISS photographed after STS-132 undocking (archival photograph, May 2010).","credit":"NASA / Crew of STS-132","license":"Public domain in the United States (NASA)","licenseUrl":"https://www.nasa.gov/nasa-brand-center/images-and-media/","sourceUrl":"https://commons.wikimedia.org/wiki/File:International_Space_Station_after_undocking_of_STS-132.jpg"},"attachments":[],"checkedAt":"2026-11-05T13:03:57.000Z","sourcePublishedAt":null,"status":"published","revision":3,"createdAt":"2026-10-27T00:44:47.627Z","updatedAt":"2026-11-05T13:03:58.504Z"}},{"resourceId":"arrl-simple-antennas","revision":1,"reason":"Initial collection: primary-source research checked October 26, 2026.","createdAt":"2026-10-27T00:44:46.985Z","record":{"id":"arrl-simple-antennas","title":"Start with the antenna system: wire, feed line, and placement","summary":"ARRL's simple-antenna resource hub connects introductions to feed lines, HF antennas, and VHF/UHF designs. It is a useful place to compare the choices behind a first station or a portable rebuild, from wire antennas to directional options. Use the linked explanations to frame what you want an antenna to do before buying parts, and keep the whole antenna system in view when judging results.","canonicalUrl":"https://www.arrl.org/building-simple-antennas","topics":["antennas-diy","hf-digital"],"tags":["antennas","feed line","HF","VHF","UHF","DIY"],"kind":"Guide","maturity":"Reference","level":"Beginner","sources":[{"label":"ARRL Building Simple Antennas","url":"https://www.arrl.org/building-simple-antennas","type":"Official documentation","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."}],"body":[],"caveats":["This is a reference hub, not a tested construction plan for a particular installation.","No publication date was supplied by the source page; do not mark it as a new October development."],"reactions":[],"media":{"src":"/hot-topics-media/nanovna.jpg","alt":"NanoVNA showing a Smith chart (illustrative equipment photograph).","credit":"Elgull / Wikimedia Commons","license":"CC BY-SA 4.0","licenseUrl":"https://creativecommons.org/licenses/by-sa/4.0/","sourceUrl":"https://commons.wikimedia.org/wiki/File:NanoVNA.jpg"},"attachments":[],"checkedAt":"2026-10-27T00:18:03.810Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T00:44:46.985Z","updatedAt":"2026-10-27T00:44:46.985Z"}},{"resourceId":"buckmaster-ocf-antenna-family","revision":1,"reason":"User-requested expansion including magnetic loops, Buckmaster OCF, G5RV history and digital voice; original sourced prose, no copied media.","createdAt":"2026-10-27T02:49:42.453Z","record":{"id":"buckmaster-ocf-antenna-family","title":"Buckmaster OCF antennas: compare bands, span and installation","summary":"Buckmaster’s off-center-fed antenna family offers several wire lengths and band combinations. The manufacturer’s seven-band model uses a 135-foot wire span, while shorter and longer models trade space against coverage. This established product reference helps compare a specific Buckmaster installation with the space actually available. An off-center-fed antenna has unequal wire sections and should not be confused with a center-fed G5RV design.","canonicalUrl":"https://www.hamcall.net/7bandocf.html","topics":["antennas-diy"],"tags":["Buckmaster","OCF","off-center-fed","wire antennas","multiband","Buck master"],"kind":"Guide","maturity":"Reference","level":"Intermediate","sources":[{"label":"Buckmaster/HamCall OCF product reference","url":"https://www.hamcall.net/7bandocf.html","type":"Manufacturer","checkedAt":"2026-10-27T02:46:06.000Z","note":"Manufacturer models, dimensions and installation qualifications."}],"body":[{"heading":"Choose by physical space and bands","text":"List the bands you want before choosing the model. Buckmaster describes four-, seven- and eight-band variants with different spans and unequal leg lengths. Mark both end locations and the feedpoint on a site plan. The advertised overall length alone does not reveal where supports or the coax route must go."},{"heading":"Check the installation conditions","text":"The manufacturer’s guidance makes mounting geometry and surroundings part of achieving the intended match. Review those conditions before relying on a tuner-free claim. Power options also need their stated operating qualifications. Compare the exact model, intended mode and sustained use rather than treating the largest listed wattage as universal."}],"caveats":["No new launch claimed. Match and usable power depend on configuration and installation."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:46:06.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:49:42.453Z","updatedAt":"2026-10-27T02:49:42.453Z"}},{"resourceId":"buddipole-mini-buddihex-portable-beam","revision":1,"reason":"User-requested expansion: source-checked radio products and station-building references, with launch and preview status distinguished.","createdAt":"2026-10-27T02:49:13.019Z","record":{"id":"buddipole-mini-buddihex-portable-beam","title":"Mini-BuddiHEX: a portable beam for 12, 10 and 6 meters","summary":"Buddipole’s Mini-BuddiHEX is a compact hexbeam covering 12, 10 and 6 meters. The manufacturer lists a weight of 5.6 pounds and a turning radius of about six feet four inches. Those dimensions make it an interesting portable-station reference, especially where a directional antenna is practical. Its three-band coverage also makes the tradeoff clear: this model does not replace a lower-HF antenna.","canonicalUrl":"https://www.buddipole.com/minibuddihex.html","topics":["antennas-diy","portable-field"],"tags":["Buddipole","Mini-BuddiHEX","hexbeam","portable antennas","6 meters"],"kind":"Guide","maturity":"Reference","level":"Intermediate","sources":[{"label":"Mini-BuddiHEX manufacturer listing","url":"https://www.buddipole.com/minibuddihex.html","type":"Manufacturer","checkedAt":"2026-10-27T02:46:06.000Z","note":"Coverage, dimensions and configuration options."}],"body":[{"heading":"Plan the whole footprint","text":"The antenna’s listed weight is only one part of the support problem. Account for mast capability, wind, guying and clear space around the full turning circle. Draw the proposed operating area before choosing a location, and check whether the antenna can rotate without approaching people, structures or electrical lines."},{"heading":"Choose the feedpoint and coverage","text":"The maker offers feedpoint connector options and supplies pre-tuned wires and transport accessories. Check the exact configuration’s instructions and ratings before ordering. Decide whether the available bands suit your intended contacts, then include mast, coax and packing requirements when comparing the complete station with a simpler wire antenna."}],"caveats":["No release date verified. Ordering and availability must be checked with the maker."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:46:06.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:49:13.019Z","updatedAt":"2026-10-27T02:49:13.019Z"}},{"resourceId":"buddipole-powerpro-field-power","revision":1,"reason":"User-requested expansion: source-checked radio products and station-building references, with launch and preview status distinguished.","createdAt":"2026-10-27T02:49:10.156Z","record":{"id":"buddipole-powerpro-field-power","title":"Buddipole PowerPro: solar charging and DC management for a field station","summary":"Buddipole PowerPro combines solar charging, battery monitoring and DC power management in one station accessory. The manufacturer specifies an MPPT solar charger and provides a display for tracking power flow. It is worth studying when a field setup has grown beyond a battery connected directly to a radio. The useful comparison is the complete power system, including battery chemistry, charging settings, connectors and actual operating load.","canonicalUrl":"https://www.buddipole.com/powerpro.html","topics":["portable-field"],"tags":["Buddipole","PowerPro","solar","MPPT","battery management","field power"],"kind":"Guide","maturity":"Reference","level":"Intermediate","sources":[{"label":"PowerPro manufacturer specifications","url":"https://www.buddipole.com/powerpro.html","type":"Manufacturer","checkedAt":"2026-10-27T02:46:06.000Z","note":"Integrated charging, monitoring and protection functions."}],"body":[{"heading":"Start with a power budget","text":"List receive, transmit and accessory loads and estimate how long each will run. Then compare battery capacity and charging opportunities with that demand. PowerPro can display battery and solar activity, but a controller cannot create energy when shading, weather or a small panel limits the available solar input."},{"heading":"Check the electrical combination","text":"Confirm the battery’s required charging profile, panel input limits and output requirements against the current documentation. Buddipole lists adjustable voltage protection and dual Powerpole outputs. Those features are useful only when configured for the connected equipment; a connector that physically fits does not establish compatible voltage, chemistry or current limits."}],"caveats":["Established product reference; no dated launch verified. Confirm battery and panel compatibility."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:46:06.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:49:10.156Z","updatedAt":"2026-10-27T02:49:10.156Z"}},{"resourceId":"chameleon-f-loop-4-magnetic-loop-preview","revision":1,"reason":"User-requested expansion including magnetic loops, Buckmaster OCF, G5RV history and digital voice; original sourced prose, no copied media.","createdAt":"2026-10-27T02:49:39.102Z","record":{"id":"chameleon-f-loop-4-magnetic-loop-preview","title":"Magnetic loops: Chameleon previews F-LOOP 4.0","summary":"Chameleon’s F-LOOP 4.0 page is a pre-production preview of a manually tuned magnetic loop for 40 through 10 meters. The manufacturer targets December 2026 but explicitly says that timing is not guaranteed and is not accepting orders or deposits. Alongside the product watch, this is a practical introduction to magnetic loops: compact dimensions come with narrow tuning bandwidth, installation sensitivity and operating limits.","canonicalUrl":"https://chameleonantenna.com/products/cha-f-loop-4-0","topics":["antennas-diy","portable-field"],"tags":["Chameleon","F-LOOP 4.0","magnetic loop","QRP","product preview","magloop","magloops"],"kind":"News","maturity":"Experimental","level":"Intermediate","sources":[{"label":"F-LOOP 4.0 manufacturer preview","url":"https://chameleonantenna.com/products/cha-f-loop-4-0","type":"Manufacturer","checkedAt":"2026-10-27T02:46:06.000Z","note":"Target December 2026, explicitly not guaranteed."},{"label":"Chameleon loop Q and bandwidth guide","url":"https://chameleonantenna.com/pages/ckb-f-loop-q-and-bandwidth","type":"Manufacturer","checkedAt":"2026-10-27T02:46:06.000Z","note":"Practical narrow-bandwidth explanation."},{"label":"F-LOOP 3.0 safety guidance","url":"https://chameleonantenna.com/pages/ckb-cha-f-loop-3-0-safety-inspection-and-maintenance","type":"Manufacturer","checkedAt":"2026-10-27T02:46:06.000Z","note":"Supports general loop hazards; old-model limits are not transferred."}],"body":[{"heading":"Understand the tuning tradeoff","text":"Chameleon’s loop guidance explains that high-Q operation produces a narrow usable bandwidth, so changing frequency or surroundings can require retuning. A broad SWR curve can also reflect loss. Treat a convenient match as one measurement, not proof of efficiency, and compare antenna behavior in the actual intended operating location."},{"heading":"Wait for final operating documentation","text":"The preview describes a new architecture and prototype ratings; older F-LOOP accessories and limits should not be assumed compatible. Small transmitting loops can develop significant RF voltage and current. Keep people clear and never touch a transmitting loop. Use the final model’s instructions for power, exposure and installation requirements."}],"caveats":["Pre-production target only. Published simulations and indoor traces are not independent field-performance evidence."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:46:06.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:49:39.102Z","updatedAt":"2026-10-27T02:49:39.102Z"}},{"resourceId":"cw-academy-learning","revision":1,"reason":"Initial collection: primary-source research checked October 26, 2026.","createdAt":"2026-10-27T00:44:47.838Z","record":{"id":"cw-academy-learning","title":"Find a guided route into CW with CW Academy","summary":"CWops presents CW Academy for beginners, returning operators, and people who want to improve copying and sending. Its site links to course options, student resources, and practice opportunities. This is a useful route for someone who prefers guided learning and conversation with other operators alongside solo exercises. Check the current course options and student portal for timing and participation details before making plans.","canonicalUrl":"https://cwops.org/cw-academy/","topics":["cw-morse","portable-field"],"tags":["CW","Morse","CWops","mentoring","practice"],"kind":"Guide","maturity":"Reference","level":"Beginner","sources":[{"label":"CWops CW Academy","url":"https://cwops.org/cw-academy/","type":"Official documentation","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."},{"label":"CW Academy student resources","url":"https://cwops.org/cw-academy/cw-academy-student-resources/","type":"Official documentation","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."}],"body":[],"caveats":["No enrollment availability or schedule is promised in this entry.","The program description and resource pages were read; no course or portal account was tested."],"reactions":[],"media":{"src":"/hot-topics-media/morse-key.jpg","alt":"Wooden-based Morse key (illustrative equipment photograph).","credit":"Lauren.mcalary / Wikimedia Commons","license":"CC BY-SA 4.0","licenseUrl":"https://creativecommons.org/licenses/by-sa/4.0/","sourceUrl":"https://commons.wikimedia.org/wiki/File:Morse_Key.jpg"},"attachments":[{"label":"Radcom field-session checklist (TXT)","url":"/hot-topics-downloads/field-checklist.txt","hosted":true,"license":"Radcom original · CC BY 4.0"}],"checkedAt":"2026-10-27T00:18:03.810Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T00:44:47.838Z","updatedAt":"2026-10-27T00:44:47.838Z"}},{"resourceId":"cw-academy-learning","revision":2,"reason":"Worksheet reuse notice clarified (v2); factual source checks unchanged.","createdAt":"2026-10-27T02:12:41.132Z","record":{"id":"cw-academy-learning","title":"Find a guided route into CW with CW Academy","summary":"CWops presents CW Academy for beginners, returning operators, and people who want to improve copying and sending. Its site links to course options, student resources, and practice opportunities. This is a useful route for someone who prefers guided learning and conversation with other operators alongside solo exercises. Check the current course options and student portal for timing and participation details before making plans.","canonicalUrl":"https://cwops.org/cw-academy/","topics":["cw-morse","portable-field"],"tags":["CW","Morse","CWops","mentoring","practice"],"kind":"Guide","maturity":"Reference","level":"Beginner","sources":[{"label":"CWops CW Academy","url":"https://cwops.org/cw-academy/","type":"Official documentation","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."},{"label":"CW Academy student resources","url":"https://cwops.org/cw-academy/cw-academy-student-resources/","type":"Official documentation","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."}],"body":[],"caveats":["No enrollment availability or schedule is promised in this entry.","The program description and resource pages were read; no course or portal account was tested."],"reactions":[],"media":{"src":"/hot-topics-media/morse-key.jpg","alt":"Wooden-based Morse key (illustrative equipment photograph).","credit":"Lauren.mcalary / Wikimedia Commons","license":"CC BY-SA 4.0","licenseUrl":"https://creativecommons.org/licenses/by-sa/4.0/","sourceUrl":"https://commons.wikimedia.org/wiki/File:Morse_Key.jpg"},"attachments":[{"label":"Radcom field-session checklist (TXT, v2)","url":"/hot-topics-downloads/field-checklist.txt","hosted":true,"license":"Radcom original · CC BY 4.0"}],"checkedAt":"2026-10-27T00:18:03.810Z","sourcePublishedAt":null,"status":"published","revision":2,"createdAt":"2026-10-27T00:44:47.838Z","updatedAt":"2026-10-27T02:12:41.132Z"}},{"resourceId":"dmr-hotspot-network-basics","revision":1,"reason":"User-requested broader learning collection: DMR, CW practice and satellite reception, with current sources and operating caveats.","createdAt":"2026-10-27T02:50:04.143Z","record":{"id":"dmr-hotspot-network-basics","title":"DMR hotspots: connect securely and understand linked talkgroups","summary":"A hotspot combines the local radio connection with a separately configured network connection. WPSD’s DMR guide walks through the operator ID, DMR mode and BrandMeister network settings, including the hotspot-security password created in SelfCare. SharkRF’s DMR documentation explains why talkgroup behavior can differ by network. Treat these as two layers to check: reaching your hotspot is not the same as reaching the intended conversation.","canonicalUrl":"https://manual.wpsd.radio/modes/dmr/","topics":["digital-voice","remote-control"],"tags":["DMR","hotspot","BrandMeister","WPSD","networking","static talkgroups"],"kind":"Guide","maturity":"Reference","level":"Beginner","sources":[{"label":"WPSD: DMR configuration","url":"https://manual.wpsd.radio/modes/dmr/","type":"Developer","checkedAt":"2026-10-27T02:36:31.000Z","note":"DMR identity, BrandMeister SelfCare hotspot-security password and network configuration."},{"label":"SharkRF: DMR talkgroup behavior","url":"https://manuals.sharkrf.com/m1ke/basic/dmrusage.html","type":"Manufacturer","checkedAt":"2026-10-27T02:36:31.000Z","note":"Distinguishes static, dynamic and auto-static linking and network-specific behavior."}],"body":[{"heading":"Start with one network","text":"Confirm your ID, selected network master and hotspot-security credential against the current project instructions. Keep the credential private. Prove one known configuration before adding gateways or cross-mode routing. If local reception works but network audio does not, inspect the connection status and authentication before changing radio hardware."},{"heading":"Know what remains linked","text":"Static talkgroups remain linked; dynamic links normally expire according to network settings. SharkRF documents a further BrandMeister auto-static behavior, so a simple timeout assumption can be wrong. Check the network’s own linking and unlinking instructions, and avoid carrying unwanted traffic by enabling many groups without understanding their behavior."}],"caveats":["Timing, linking and gateway behavior vary by server and configuration.","No hotspot account, credential or live RF connection was tested."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:36:31.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:50:04.143Z","updatedAt":"2026-10-27T02:50:04.143Z"}},{"resourceId":"dmr-id-first-codeplug","revision":1,"reason":"User-requested expansion including magnetic loops, Buckmaster OCF, G5RV history and digital voice; original sourced prose, no copied media.","createdAt":"2026-10-27T02:49:49.260Z","record":{"id":"dmr-id-first-codeplug","title":"DMR first setup: your radio ID and a small codeplug","summary":"A DMR codeplug is the radio configuration that connects your identity, contacts, channels and zones. WPSD’s AnyTone walkthrough shows how those pieces depend on one another. Begin with a backup and a small working configuration before importing a large channel collection. BridgeCom directs US amateurs to RadioID for registration; BrandMeister’s June 2026 notice also makes ongoing ID verification part of keeping an existing setup usable.","canonicalUrl":"https://manual.wpsd.radio/zero_hero/anytone_878/","topics":["digital-voice"],"tags":["DMR","radio ID","RadioID","codeplug","AnyTone","CPS"],"kind":"Guide","maturity":"Reference","level":"Beginner","sources":[{"label":"WPSD: AnyTone codeplug walkthrough","url":"https://manual.wpsd.radio/zero_hero/anytone_878/","type":"Developer","checkedAt":"2026-10-27T02:36:31.000Z","note":"Radio ID, contacts, channels, zones, backup and firmware-matched programming example."},{"label":"BridgeCom: obtaining a DMR ID","url":"https://support.bridgecomsystems.com/obtaining-your-dmr-id","type":"Manufacturer","checkedAt":"2026-10-27T02:36:31.000Z","note":"US-oriented registration and license-document guidance; directs service questions to RadioID."},{"label":"BrandMeister: annual RadioID verification","url":"https://news.brandmeister.network/new-annual-verification-process-by-radioid-net/","type":"Official documentation","checkedAt":"2026-10-27T02:36:31.000Z","note":"June 15, 2026 network notice describes annual verification beginning July 1."}],"body":[{"heading":"Build one understandable setup","text":"Use programming software matched to the radio model and firmware. Read and save the radio’s current configuration first. Add your assigned ID and a contact, then a channel that references them, then a zone containing that channel. WPSD’s sequence is an example to understand, not a universal file for every radio."},{"heading":"Keep identity maintenance separate","text":"BrandMeister says annual RadioID verification began July 1, 2026. Keep account details current and check the official service directly when a verification request arrives. A downloaded contact database identifies other operators; it does not replace your own assigned ID or establish that a radio is configured correctly."}],"caveats":["The programming walkthrough is model-specific; no radio was programmed or factory-reset for this entry.","Direct RadioID FAQ content could not be inspected; registration guidance here is attributed to BridgeCom and BrandMeister."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:36:31.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:49:49.260Z","updatedAt":"2026-10-27T02:49:49.260Z"}},{"resourceId":"dmr-talkgroups-slots-colorcodes","revision":1,"reason":"User-requested expansion including magnetic loops, Buckmaster OCF, G5RV history and digital voice; original sourced prose, no copied media.","createdAt":"2026-10-27T02:49:52.000Z","record":{"id":"dmr-talkgroups-slots-colorcodes","title":"DMR channels explained: talkgroups, time slots and color codes","summary":"Getting a DMR channel right involves more than entering a frequency. A talkgroup selects the group being addressed; a time slot selects one of the two shared channels in conventional two-slot DMR operation; a color code must match the intended system. DMR-MARC explains these distinctions. The repeater operator’s current information supplies the actual settings, which can differ between nearby networks.","canonicalUrl":"https://dmr-marc.net/media/DMR-FAQs.pdf","topics":["digital-voice"],"tags":["DMR","talkgroups","time slots","color codes","repeaters","DMRVA"],"kind":"Guide","maturity":"Reference","level":"Beginner","sources":[{"label":"DMR-MARC: DMR FAQs","url":"https://dmr-marc.net/media/DMR-FAQs.pdf","type":"Official documentation","checkedAt":"2026-10-27T02:36:31.000Z","note":"Explains color codes, two time slots and talkgroups; older product/network examples are not treated as current."},{"label":"DMRVA: network talkgroup matrix","url":"https://www.dmrva.org/talkgroups/","type":"Official documentation","checkedAt":"2026-10-27T02:36:31.000Z","note":"Operator page identifies a July 25, 2026 matrix and its DMRVA/N4HRS-only scope."}],"body":[{"heading":"Separate access from destination","text":"Read the operator’s receive/transmit frequencies, color code, slot and permitted talkgroup together. Two talkgroups on one slot still share that slot’s airtime; changing a group number does not create another independent radio channel. When troubleshooting, compare each field individually instead of repeatedly replacing the entire codeplug."},{"heading":"Use a network-specific reference","text":"DMRVA publishes a matrix covering its own and N4HRS repeaters, with a July 2026 update. Its page explicitly excludes other networks, including BrandMeister. Use it as an example of authoritative local documentation, then consult the operator of the repeater you actually intend to use."}],"caveats":["The DMR-MARC FAQ contains older equipment/network examples; this guide uses its basic terminology only.","No particular repeater, frequency or talkgroup is claimed available at your location."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:36:31.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:49:52.000Z","updatedAt":"2026-10-27T02:49:52.000Z"}},{"resourceId":"dx-launcher-one-shot-antenna-line-tool","revision":1,"reason":"User-requested expansion: source-checked radio products and station-building references, with launch and preview status distinguished.","createdAt":"2026-10-27T02:49:03.565Z","record":{"id":"dx-launcher-one-shot-antenna-line-tool","title":"DX Launcher One-Shot: getting an antenna line into position","summary":"The DX Launcher One-Shot is a line-launching accessory intended to help place a lightweight line for an antenna support. Its maker’s listing combines the launcher with a reel, line weights and replaceable rubber components. This product reference addresses an easily overlooked part of portable operating: how to put the antenna where it belongs while keeping the surrounding area clear and the setup controlled.","canonicalUrl":"https://www.hamradio247.com/shop/p/the-one-shot-slingshot","topics":["portable-field","antennas-diy"],"tags":["DX Launcher","One-Shot","antenna support","field accessories"],"kind":"Guide","maturity":"Reference","level":"Beginner","sources":[{"label":"One-Shot maker listing","url":"https://www.hamradio247.com/shop/p/the-one-shot-slingshot","type":"Manufacturer","checkedAt":"2026-10-27T02:46:06.000Z","note":"Maker-branded product page; no availability promise."}],"body":[{"heading":"Evaluate the site before the tool","text":"Choose a location with permission and a clear path, well away from overhead electrical conductors, people, animals and vehicles. Consider where the weight and line could land if the attempt misses. Eye protection, component inspection and the maker’s operating instructions belong in the setup routine before any launch."},{"heading":"Include retrieval in the plan","text":"A successful placement still needs a practical way to retrieve the line and leave the site clean. Compare the tool’s packed size, replacement components and support-line workflow with your available space. A launcher does not assess tree condition, attachment strength or whether a particular public site permits its use."}],"caveats":["No global launch date was verified. The checked listing offered an in-stock notification."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:46:06.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:49:03.565Z","updatedAt":"2026-10-27T02:49:03.565Z"}},{"resourceId":"dxengineering-portable-station-package-announcement","revision":1,"reason":"November 4 primary-source research: dated retailer package announcement, commercial relationship disclosed, practical component-list checks, no stock/performance claim or copied media.","createdAt":"2026-11-04T12:58:41.253Z","record":{"id":"dxengineering-portable-station-package-announcement","title":"Portable station packages: compare the complete equipment list","summary":"DX Engineering's OnAllBands post dated November 2, 2026 highlights its HF portable-station packages. This is a retailer's announcement about its own offerings, not an independent review or a launch date for every included product. The packages combine radios with different antenna, power and support arrangements.","canonicalUrl":"https://www.onallbands.com/new-products-spotlight-for-november-2026-pota-packages-satellite-friendly-antennas-more/","topics":["portable-field","antennas-diy"],"tags":["DX Engineering","portable station","POTA","field power","FTX-1 Field","accessories","retailer announcement"],"kind":"News","maturity":"Reference","level":"Beginner","sources":[{"label":"DX Engineering / OnAllBands — November product spotlight","url":"https://www.onallbands.com/new-products-spotlight-for-november-2026-pota-packages-satellite-friendly-antennas-more/","type":"Manufacturer","checkedAt":"2026-11-04T12:58:19.000Z","note":"Primary commercial source from the package supplier and retailer; November 2 publication date, not individual component launch dates."},{"label":"DX Engineering — DXE-POTA-10 package contents","url":"https://www.dxengineering.com/part/dx-engineering/dxe-pota-10/8611041","type":"Manufacturer","checkedAt":"2026-11-04T12:58:19.000Z","note":"Supplier's itemized package list; used for included equipment, not current shipping or independent performance."}],"body":[{"heading":"Use one package as a planning example","text":"The DXE-POTA-10 listing combines an FTX-1 Field, a 40–10 metre end-fed wire antenna, battery and charger, mast, feedline choke, cables, rope and backpack. The radio's wider frequency coverage does not establish that the supplied HF antenna covers those additional bands."},{"heading":"Check the limits before choosing","text":"Compare each component's bands, connectors, mode-specific power ratings and supply requirements with your intended outing. Plan battery runtime from your own operating load. Review the current itemized list and original manuals; a bundle description alone does not verify suitability for your site."}],"caveats":["Commercial-source disclosure: OnAllBands is DX Engineering's blog, and DX Engineering sells these packages. This entry is informational coverage, not a tested recommendation.","No equipment was tested. Stock, delivery dates and package substitutions were not verified; the retrieved listing displayed an already-past shipping estimate."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-11-04T12:58:19.000Z","sourcePublishedAt":"2026-11-02T00:00:00.000Z","status":"published","revision":1,"createdAt":"2026-11-04T12:58:41.253Z","updatedAt":"2026-11-04T12:58:41.253Z"}},{"resourceId":"flex-8600-receiver-architecture","revision":1,"reason":"User-requested source-checked library expansion; original factual summary with source dates and product-status caveats.","createdAt":"2026-10-27T02:48:15.880Z","record":{"id":"flex-8600-receiver-architecture","title":"FLEX-8600: when four receivers and two capture units matter","summary":"FlexRadio’s FLEX-8600 is a 100 W HF/6m SDR designed for external control from compatible clients. The manufacturer lists four independent receivers, two spectral capture units, diversity reception and cross-band full-duplex capability. Its comparison chart helps distinguish those capabilities from the two-receiver FLEX-8400 and from M models with a built-in display. This reference focuses on station architecture rather than a performance ranking.","canonicalUrl":"https://www.flexradio.com/products/flex-8600-signature-series-sdr-transceiver/","topics":["hf-digital","sdr-discovery","remote-control"],"tags":["FlexRadio","FLEX-8600","FLEX-8400","diversity","receiver slices","product spotlight"],"kind":"Guide","maturity":"Reference","level":"Intermediate","sources":[{"label":"FlexRadio FLEX-8600 product page","url":"https://www.flexradio.com/products/flex-8600-signature-series-sdr-transceiver/","type":"Manufacturer","checkedAt":"2026-10-27T02:40:23.000Z","note":"100 W operation, receiver count, diversity, client and cross-band features."},{"label":"FlexRadio Signature series comparison","url":"https://www.flexradio.com/comparison/","type":"Manufacturer","checkedAt":"2026-10-27T02:40:23.000Z","note":"8400/8600 receiver and capture-unit differences; M-model displays."}],"body":[{"heading":"Choose the useful capacity","text":"Receiver slices are independently tuned receiving views; they are not extra transmitter chains. Think through a real session: a digital-mode frequency, a voice contact and another band to monitor. More simultaneous receivers are useful only if the antennas, software and workflow support that plan."},{"heading":"Compare the whole system","text":"The 8600’s manufacturer comparison lists two capture units and diversity support, while the 8400 lists one capture unit. Also compare front-panel preference, antenna ports and client software. FlexRadio identifies the Mac and iOS clients as third-party products, so verify their separate requirements."}],"caveats":["Cross-band operation still requires careful antenna isolation and a suitable station design.","Manufacturer specifications were checked; no receiver comparison or contest test was performed."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:40:23.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:48:15.880Z","updatedAt":"2026-10-27T02:48:15.880Z"}},{"resourceId":"flex-aurora-integrated-station","revision":1,"reason":"User-requested source-checked Hot Topics expansion: radios, SDRs, antennas, accessories, learning and radio history.","createdAt":"2026-10-27T02:47:58.052Z","record":{"id":"flex-aurora-integrated-station","title":"FlexRadio Aurora: an SDR station with the amplifier built in","summary":"FlexRadio positions the Aurora AU-510 as an integrated HF/6m station: SDR transceiver, amplifier, automatic tuner and power supply share one chassis. Its product specifications distinguish up to 500 W on HF from up to 200 W on 6m. The headless model uses a SmartSDR client or Maestro for control. This is a current product reference, not a claim that Aurora launched this month.","canonicalUrl":"https://www.flexradio.com/products/aurora-au-510-signature-series/","topics":["hf-digital","sdr-discovery","remote-control"],"tags":["FlexRadio","Aurora","AU-510","SDR","product spotlight","integrated amplifier"],"kind":"Guide","maturity":"Reference","level":"Intermediate","sources":[{"label":"FlexRadio AU-510 product specifications","url":"https://www.flexradio.com/products/aurora-au-510-signature-series/","type":"Manufacturer","checkedAt":"2026-10-27T02:40:23.000Z","note":"Integration, RF output limits, receiver count and tuner range."},{"label":"FlexRadio Aurora family","url":"https://www.flexradio.com/aurora/","type":"Manufacturer","checkedAt":"2026-10-27T02:40:23.000Z","note":"Manufacturer family and model links."}],"body":[{"heading":"Why it matters","text":"Combining the major station boxes can simplify a remote or rack installation. Start by comparing the control interface, receiver count and antenna connections against the station you actually want to run. Integration does not remove the need to plan antennas, cooling and power."},{"heading":"Read the model-specific limits","text":"The AU-510 page lists two slice receivers and a tuner matching range up to 3:1 SWR. Treat transmitter efficiency and signal-quality statements as manufacturer claims. Compare the other Aurora models separately rather than carrying these limits across the entire family."}],"caveats":["No independent RF or remote-operation test was performed.","Confirm present delivery estimates, software entitlements and local operating limits before purchase."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:40:23.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:47:58.052Z","updatedAt":"2026-10-27T02:47:58.052Z"}},{"resourceId":"flex-maestro-c-control-console","revision":1,"reason":"User-requested source-checked library expansion; original factual summary with source dates and product-status caveats.","createdAt":"2026-10-27T02:48:11.996Z","record":{"id":"flex-maestro-c-control-console","title":"Maestro C: physical radio controls away from the radio","summary":"Maestro is FlexRadio’s dedicated control console for compatible FLEX-6000, FLEX-8000 and Aurora radios. It combines tuning controls with an eight-inch touchscreen and spectrum display, allowing the radio hardware to sit elsewhere on the network. The current product page and Maestro C specification sheet describe external-monitor support and optional battery operation. This is an established control product, not a newly dated launch.","canonicalUrl":"https://www.flexradio.com/products/maestro-control-console-flex-6000/","topics":["remote-control","sdr-discovery","cw-morse"],"tags":["FlexRadio","Maestro C","control console","CW paddles","network radio","product spotlight"],"kind":"Guide","maturity":"Reference","level":"Intermediate","sources":[{"label":"FlexRadio Maestro product page","url":"https://www.flexradio.com/products/maestro-control-console-flex-6000/","type":"Manufacturer","checkedAt":"2026-10-27T02:40:23.000Z","note":"Supported radio families, display, controls and optional accessories."},{"label":"FlexRadio Maestro C specification sheet","url":"https://edge.flexradio.com/www/offload/20240507151335/FLEX-MaestroC-SpecSheet.pdf","type":"Manufacturer","checkedAt":"2026-10-27T02:40:23.000Z","note":"C-generation controls, external display and interfaces."}],"body":[{"heading":"Match the operating position","text":"A console suits operators who want knobs, a display and a key connection without dedicating a conventional computer to the desk. Compare the cost and portability of that arrangement with the client devices you already own, including the radio hardware required behind the console."},{"heading":"Check the exact generation","text":"Use the Maestro C documents for power, headset and accessory details. Different Maestro generations have different connections, and a combined product page may discuss older accessories too. Confirm microphone wiring and the supplied power accessories before ordering adapters."}],"caveats":["A Maestro console is not a standalone RF transceiver.","Network reliability and compatible radio/software remain necessary; no hands-on evaluation is claimed."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:40:23.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:48:11.996Z","updatedAt":"2026-10-27T02:48:11.996Z"}},{"resourceId":"flex-smartlink-reference","revision":1,"reason":"Initial collection: primary-source research checked October 26, 2026.","createdAt":"2026-10-27T00:44:49.110Z","record":{"id":"flex-smartlink-reference","title":"SmartLink: the remote-radio connection workflow","summary":"FlexRadio's SmartLink quick-start document walks through software setup, radio registration, connection testing and remote access. It is a useful archived explanation of the SmartLink workflow for the FLEX-6000 generation. The manufacturer still links this guide, but its screenshots and licensing steps belong to an older SmartSDR version, so use it with the current documentation for the radio and software you actually run.","canonicalUrl":"https://www.flexradio.com/documentation/smartlink-quick-start-guide-for-smartsdr-pdf/","topics":["remote-control","sdr-discovery"],"tags":["FlexRadio","SmartLink","SmartSDR","FLEX-6000","remote station","archive"],"kind":"Manual","maturity":"Historical","level":"Beginner","sources":[{"label":"FlexRadio SmartLink guide page","url":"https://www.flexradio.com/documentation/smartlink-quick-start-guide-for-smartsdr-pdf/","type":"Manufacturer","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."},{"label":"SmartLink quick-start PDF v1.4","url":"https://edge.flexradio.com/www/uploads/20200818184955/SmartLink-Quick-Start-Guide-for-SmartSDR.pdf","type":"Manufacturer","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."}],"body":[],"caveats":["The linked guide covers older SmartSDR setup; it is not a current purchasing or licensing guide.","Remote operation needs a configured station and working Internet connections.","No remote connection or radio control was exercised in this research."],"reactions":[],"media":null,"attachments":[{"label":"SmartLink quick-start v1.4 (PDF)","url":"https://edge.flexradio.com/www/uploads/20200818184955/SmartLink-Quick-Start-Guide-for-SmartSDR.pdf","hosted":false,"license":"Original source; no mirrored copy"},{"label":"Radcom signal observation worksheet (TXT)","url":"/hot-topics-downloads/signal-observation.txt","hosted":true,"license":"Radcom original · CC BY 4.0"}],"checkedAt":"2026-10-27T00:18:03.810Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T00:44:49.110Z","updatedAt":"2026-10-27T00:44:49.110Z"}},{"resourceId":"flex-smartlink-reference","revision":2,"reason":"Worksheet reuse notice clarified (v2); factual source checks unchanged.","createdAt":"2026-10-27T02:11:59.359Z","record":{"id":"flex-smartlink-reference","title":"SmartLink: the remote-radio connection workflow","summary":"FlexRadio's SmartLink quick-start document walks through software setup, radio registration, connection testing and remote access. It is a useful archived explanation of the SmartLink workflow for the FLEX-6000 generation. The manufacturer still links this guide, but its screenshots and licensing steps belong to an older SmartSDR version, so use it with the current documentation for the radio and software you actually run.","canonicalUrl":"https://www.flexradio.com/documentation/smartlink-quick-start-guide-for-smartsdr-pdf/","topics":["remote-control","sdr-discovery"],"tags":["FlexRadio","SmartLink","SmartSDR","FLEX-6000","remote station","archive"],"kind":"Manual","maturity":"Historical","level":"Beginner","sources":[{"label":"FlexRadio SmartLink guide page","url":"https://www.flexradio.com/documentation/smartlink-quick-start-guide-for-smartsdr-pdf/","type":"Manufacturer","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."},{"label":"SmartLink quick-start PDF v1.4","url":"https://edge.flexradio.com/www/uploads/20200818184955/SmartLink-Quick-Start-Guide-for-SmartSDR.pdf","type":"Manufacturer","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."}],"body":[],"caveats":["The linked guide covers older SmartSDR setup; it is not a current purchasing or licensing guide.","Remote operation needs a configured station and working Internet connections.","No remote connection or radio control was exercised in this research."],"reactions":[],"media":null,"attachments":[{"label":"SmartLink quick-start v1.4 (PDF)","url":"https://edge.flexradio.com/www/uploads/20200818184955/SmartLink-Quick-Start-Guide-for-SmartSDR.pdf","hosted":false,"license":"Original source; no mirrored copy"},{"label":"Radcom signal observation worksheet (TXT, v2)","url":"/hot-topics-downloads/signal-observation.txt","hosted":true,"license":"Radcom original · CC BY 4.0"}],"checkedAt":"2026-10-27T00:18:03.810Z","sourcePublishedAt":null,"status":"published","revision":2,"createdAt":"2026-10-27T00:44:49.110Z","updatedAt":"2026-10-27T02:11:59.359Z"}},{"resourceId":"flex-smartsdr-4316-release-notes","revision":1,"reason":"Add a dated primary-source SmartSDR release reference with Early Access label, model/license limits and practical upgrade caveats. Original summary only; link to manufacturer PDF without copying or uploading it.","createdAt":"2026-10-30T12:01:08.495Z","record":{"id":"flex-smartsdr-4316-release-notes","title":"SmartSDR 4.3.16: dated release notes and upgrade caveats","summary":"FlexRadio's October 13, 2026 release notes describe SmartSDR 4.3.16 as an Early Access release for Aurora, FLEX-8000, FLEX-6000 and Maestro. CW profiles and revised PTT behaviour are practical changes to review before updating. Feature availability depends on the model and license; this record describes the dated release, not a newly verified change in licensing.","canonicalUrl":"https://www.flexradio.com/software/smartsdr-v4-3-16/","topics":["hf-digital","cw-morse","remote-control","sdr-discovery"],"tags":["FlexRadio","SmartSDR","4.3.16","Early Access","CW","firmware","upgrade"],"kind":"News","maturity":"Experimental","level":"Intermediate","sources":[{"label":"FlexRadio — SmartSDR 4.3.16 download page","url":"https://www.flexradio.com/software/smartsdr-v4-3-16/","type":"Manufacturer","checkedAt":"2026-10-30T12:00:13.000Z","note":"Version-specific installers and original release-note links; x64/arm64 distinction."},{"label":"FlexRadio — SmartSDR 4.3.16 release notes","url":"https://edge.flexradio.com/www/offload/20261012095049/SmartSDR-v4.3.16-Release-Notes.pdf","type":"Manufacturer","checkedAt":"2026-10-30T12:00:13.000Z","note":"Document gives October 13, 2026 release date, Early Access designation, feature matrix and upgrade warnings."}],"body":[{"heading":"Plan the update before leaving the station","text":"The notes recommend exporting profiles and flag extra driver-removal steps for installations at 4.1.5 or earlier. They also warn that upgrading deletes Maestro/M DVK function-key memories. Read the complete instructions for your starting version and hardware."},{"heading":"Review controls after upgrading","text":"CW profiles collect keyer and related settings. Hardware PTT now uses the selected audio source by default; the optional override restores the earlier analogue-microphone behaviour. Confirm the intended source before transmitting. Choose the Windows installer matching the computer's processor architecture."}],"caveats":["Early Access is the designation in the dated notes; no later feature-access transition is inferred.","No installation, RF test or performance comparison was conducted."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-30T12:00:13.000Z","sourcePublishedAt":"2026-10-13T00:00:00.000Z","status":"published","revision":1,"createdAt":"2026-10-30T12:01:08.495Z","updatedAt":"2026-10-30T12:01:08.495Z"}},{"resourceId":"fm-satellite-pass-etiquette","revision":1,"reason":"User-requested broader learning collection: DMR, CW practice and satellite reception, with current sources and operating caveats.","createdAt":"2026-10-27T02:50:18.071Z","record":{"id":"fm-satellite-pass-etiquette","title":"Your first FM satellite contact: listen, keep it brief, share the pass","summary":"An FM satellite pass is a short shared opportunity, not a private repeater session. AMSAT’s operating guide emphasizes hearing the satellite, using full-duplex capability where possible and leaving room for other stations. A practical first goal is to follow the traffic and understand the exchange before joining it. Clear callsigns and considerate timing can matter more than trying to make the largest number of contacts.","canonicalUrl":"https://www.amsat.org/fm-satellites-good-operating-practices-for-beginning-and-experienced-operators/","topics":["space-radio","portable-field"],"tags":["satellites","FM","full duplex","operating","grid squares"],"kind":"Guide","maturity":"Reference","level":"Beginner","sources":[{"label":"AMSAT: FM satellite operating practices","url":"https://www.amsat.org/fm-satellites-good-operating-practices-for-beginning-and-experienced-operators/","type":"Official documentation","checkedAt":"2026-10-27T02:36:31.000Z","note":"Shared-pass etiquette, receiving your downlink, full duplex and concise exchanges."}],"body":[{"heading":"Listen before transmitting","text":"Establish that you can hear the satellite before attempting a contact. Hearing the downlink while transmitting helps reveal whether your signal is getting through or covering another caller. If repeated calls receive no response, pause and inspect the setup instead of occupying more of a limited pass."},{"heading":"Make room for other operators","text":"Let existing exchanges finish, use clear phonetics, and keep your own exchange concise. AMSAT discourages repeated contacts that block newcomers and asks operators to consider rare portable locations. You can gain useful experience by making one contact and listening to the remainder of the pass."}],"caveats":["This etiquette reference does not establish any satellite’s current operating status.","No satellite transmission or reception was attempted for this entry."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:36:31.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:50:18.071Z","updatedAt":"2026-10-27T02:50:18.071Z"}},{"resourceId":"freedv-241-maintenance-release","revision":1,"reason":"November 3 primary-source maintenance: October 31 FreeDV 2.4.1 release and versioned application/integration notes; distinguish stable maintenance from V2 beta, original summary, no assets uploaded.","createdAt":"2026-11-03T13:04:44.157Z","record":{"id":"freedv-241-maintenance-release","title":"FreeDV 2.4.1: audio, rig-control and integration fixes","summary":"FreeDV's October 31, 2026 announcement describes version 2.4.1 as a maintenance release addressing audio, rig-control and crash problems. Separate application and integration packages serve different station setups. This release is distinct from the continuing RADE V2 and FreeDV 3.0 beta work.","canonicalUrl":"https://freedv.org/freedv-2-4-1-released/","topics":["hf-digital","digital-voice","remote-control","sdr-discovery"],"tags":["FreeDV","2.4.1","RADE","FlexRadio","KA9Q","WebSDR","software update"],"kind":"News","maturity":"Stable","level":"Intermediate","sources":[{"label":"FreeDV — 2.4.1 release announcement","url":"https://freedv.org/freedv-2-4-1-released/","type":"Developer","checkedAt":"2026-11-03T13:04:43.000Z","note":"October 31, 2026 announcement; maintenance scope and platform choices."},{"label":"FreeDV application — v2.4.1 release notes","url":"https://github.com/freedv/freedv-gui/releases/tag/v2.4.1","type":"Developer","checkedAt":"2026-11-03T13:04:43.000Z","note":"Versioned application fixes including audio handling and receive muting until PTT-off confirmation."},{"label":"FreeDV integrations — v2.4.1 release notes","url":"https://github.com/freedv/freedv-integrations/releases/tag/v2.4.1","type":"Developer","checkedAt":"2026-11-03T13:04:43.000Z","note":"Integration-specific fixes, FlexRadio model/package distinctions and receive-only KA9Q/WebSDR client."},{"label":"FreeDV — November 2 development report","url":"https://freedv.org/mooneers-freeedv-update-october-2026/","type":"Developer","checkedAt":"2026-11-03T13:04:43.000Z","note":"Separates the released 2.4.1 maintenance work from upcoming 3.0 and subsequent experimental audio work."}],"body":[{"heading":"Choose the package for the station","text":"The integration notes distinguish PC or Raspberry Pi FlexRadio packages, supporting the 6000, 8000 and Aurora families, from the SmartSDR-uploaded container limited to 8000 and Aurora radios. The KA9Q/WebSDR client is receive-only. Match architecture and operating method before downloading."},{"heading":"Verify the behaviour you depend on","text":"Application notes describe keeping receive audio muted until the radio confirms PTT is off. Integration notes address connection handling and audio-buffer faults. After an update, check your own audio routing, radio control and return to receive; these developer fixes are not a guarantee for every station."}],"caveats":["No software was installed or station operated for this entry; fixes and compatibility are attributed to the developers.","The linked release pages supply original downloads. No binaries, manuals, audio samples or images are mirrored."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-11-03T13:04:43.000Z","sourcePublishedAt":"2026-10-31T00:00:00.000Z","status":"published","revision":1,"createdAt":"2026-11-03T13:04:44.157Z","updatedAt":"2026-11-03T13:04:44.157Z"}},{"resourceId":"freedv-rade-v2-beta","revision":1,"reason":"Initial collection: primary-source research checked October 26, 2026.","createdAt":"2026-10-27T00:44:51.205Z","record":{"id":"freedv-rade-v2-beta","title":"FreeDV RADE V2 enters an over-the-air beta campaign","summary":"FreeDV announced a RADE V2 test campaign using a beta of freedv-gui 3.0 for real-time push-to-talk tests over radio. This is a useful development to follow if you are curious about digital voice on HF and how it compares with SSB. The announcement describes a structured testing effort rather than a general-release recommendation. Its October update says the team already has enough testers.","canonicalUrl":"https://freedv.org/rade-v2-test-team/","topics":["hf-digital","digital-voice"],"tags":["FreeDV","RADE","digital voice","HF","beta"],"kind":"News","maturity":"Experimental","level":"Intermediate","sources":[{"label":"FreeDV RADE V2 Test Team","url":"https://freedv.org/rade-v2-test-team/","type":"Developer","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."}],"body":[],"caveats":["Experimental beta work; do not label RADE V2 as a stable general release based on this announcement.","Recruitment was closed in the October 2 update; do not display a current 'join the test team' call to action.","Developer announcement and reader interest do not establish independent performance or hobby-wide popularity."],"reactions":[{"author":"Alexandros SV1RVP, comment on FreeDV's announcement","text":"Alexandros SV1RVP commented that he supports FreeDV in Greece and offered user-interface work and over-the-air testing. This shows an individual operator's interest, not a completed performance comparison.","url":"https://freedv.org/rade-v2-test-team/"}],"media":{"src":"/hot-topics-media/icom705.jpg","alt":"ICOM IC-705 (illustrative equipment photograph).","credit":"Batchman99 / Wikimedia Commons","license":"CC BY-SA 4.0","licenseUrl":"https://creativecommons.org/licenses/by-sa/4.0/","sourceUrl":"https://commons.wikimedia.org/wiki/File:ICOM_IC-705.jpg"},"attachments":[],"checkedAt":"2026-10-27T00:18:03.810Z","sourcePublishedAt":"2026-09-24T12:00:00.000Z","status":"published","revision":1,"createdAt":"2026-10-27T00:44:51.205Z","updatedAt":"2026-10-27T00:44:51.205Z"}},{"resourceId":"freedv-rade-v2-beta","revision":2,"reason":"November 3 source-checked follow-up: append October 30 developer's tuning limitation and future beta-work caveats. Preserve original campaign date, source, operator attribution and existing reviewed image unchanged; no uploads or rights approvals.","createdAt":"2026-11-03T13:04:49.335Z","record":{"id":"freedv-rade-v2-beta","title":"FreeDV RADE V2: beta campaign and tuning caveats","summary":"FreeDV announced a RADE V2 test campaign using a beta of freedv-gui 3.0 for real-time push-to-talk tests over radio. This is a useful development to follow if you are curious about digital voice on HF and how it compares with SSB. The announcement describes a structured testing effort rather than a general-release recommendation. Its October update says the team already has enough testers. An October 30 developer report now adds campaign findings and unresolved tuning limitations; it does not announce a stable RADE V2 release.","canonicalUrl":"https://freedv.org/rade-v2-test-team/","topics":["hf-digital","digital-voice"],"tags":["FreeDV","RADE","digital voice","HF","beta"],"kind":"News","maturity":"Experimental","level":"Intermediate","sources":[{"label":"FreeDV RADE V2 Test Team","url":"https://freedv.org/rade-v2-test-team/","type":"Developer","checkedAt":"2026-11-03T13:04:43.000Z","note":"September 24 campaign announcement; October 2 recruitment closure remains present. Original operator comment retained."},{"label":"FreeDV — David's October 2026 beta report","url":"https://freedv.org/david-october-2026-v2-ptt-tests-and-improvements/","type":"Developer","checkedAt":"2026-11-03T13:04:43.000Z","note":"Published October 30; developer reports PTT beta results, tuning corner case and planned further testing."}],"body":[{"heading":"October 30 follow-up: check tuning and build status","text":"David Rowe reports that frequency offsets beyond about 32 Hz can cause an incorrect lock and garbled speech in the tested V2 beta. He describes corrective work targeted for further beta testing in mid-November; that target is not confirmation that a fix has shipped."},{"heading":"Keep the experimental boundary visible","text":"The report also describes retraining that could change compatibility with the beta waveform. Confirm the build and waveform used at both ends before an agreed test. These are developer findings from a limited campaign, not Radcom measurements or evidence of operator-wide consensus."}],"caveats":["Experimental beta work; do not label RADE V2 as a stable general release based on this announcement.","Recruitment was closed in the October 2 update; do not display a current 'join the test team' call to action.","Developer announcement and reader interest do not establish independent performance or hobby-wide popularity."],"reactions":[{"author":"Alexandros SV1RVP, comment on FreeDV's announcement","text":"Alexandros SV1RVP commented that he supports FreeDV in Greece and offered user-interface work and over-the-air testing. This shows an individual operator's interest, not a completed performance comparison.","url":"https://freedv.org/rade-v2-test-team/"}],"media":{"src":"/hot-topics-media/icom705.jpg","alt":"ICOM IC-705 (illustrative equipment photograph).","credit":"Batchman99 / Wikimedia Commons","license":"CC BY-SA 4.0","licenseUrl":"https://creativecommons.org/licenses/by-sa/4.0/","sourceUrl":"https://commons.wikimedia.org/wiki/File:ICOM_IC-705.jpg"},"attachments":[],"checkedAt":"2026-11-03T13:04:43.000Z","sourcePublishedAt":"2026-09-24T12:00:00.000Z","status":"published","revision":2,"createdAt":"2026-10-27T00:44:51.205Z","updatedAt":"2026-11-03T13:04:49.335Z"}},{"resourceId":"g5rv-louis-varney-history-design","revision":1,"reason":"User-requested expansion including magnetic loops, Buckmaster OCF, G5RV history and digital voice; original sourced prose, no copied media.","createdAt":"2026-10-27T02:49:45.994Z","record":{"id":"g5rv-louis-varney-history-design","title":"G5RV history: Louis Varney’s 1946 design and its matching section","summary":"Louis Varney, G5RV, developed the antenna bearing his callsign in 1946; its first RSGB Bulletin article appeared in July 1958. RSGB’s antenna reference and Varney’s own retrospective explain a design often reduced to a familiar wire length. The full-size G5RV combines a center-fed wire with a deliberately chosen transmission-line section. Understanding that section helps separate the original design from later variations and marketing shorthand.","canonicalUrl":"https://www.rsgbshop.org/acatalog/PDF/Successful_Wire%20Ant_sample.pdf","topics":["antennas-diy"],"tags":["G5RV","Louis Varney","antenna history","wire antennas","matching section"],"kind":"Guide","maturity":"Historical","level":"Intermediate","sources":[{"label":"RSGB Successful Wire Antennas sample","url":"https://www.rsgbshop.org/acatalog/PDF/Successful_Wire%20Ant_sample.pdf","type":"Official documentation","checkedAt":"2026-10-27T02:46:06.000Z","note":"RSGB 2012 publisher sample; verifies 1946 design and July 1958 publication."},{"label":"Varney retrospective in RSARS Mercury","url":"https://rsars.org.uk/wp-content/uploads/2013/10/mercury-51.pdf","type":"Official documentation","checkedAt":"2026-10-27T02:46:06.000Z","note":"Spring 1975 issue; author states summer 1946 origin."}],"body":[{"heading":"Follow the historical design","text":"The full-size design is commonly associated with a roughly 102-foot wire and an open-wire matching section, with particular attention to 20-meter operation. Later descriptions and practical versions changed feeder arrangements. Varney’s retrospective dates the invention to summer 1946 and distinguishes that origin from publication and subsequent explanatory articles."},{"heading":"Why the feed line matters","text":"The matching section is an electrical component, not simply a convenient drop from the antenna. Its electrical length depends on the line used. Changing that section, the remaining feeder or the operating band changes the impedance presented to the station. Multiband operation does not imply a universal 50-ohm match without matching equipment."}],"caveats":["Historical reference, not a complete construction plan. Published diagrams remain with their rights holders."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:46:06.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:49:45.994Z","updatedAt":"2026-10-27T02:49:45.994Z"}},{"resourceId":"gpredict-pass-planning","revision":1,"reason":"User-requested broader learning collection: DMR, CW practice and satellite reception, with current sources and operating caveats.","createdAt":"2026-10-27T02:50:21.073Z","record":{"id":"gpredict-pass-planning","title":"Plan a satellite pass with Gpredict and current orbital elements","summary":"Gpredict displays satellite positions and predicts future passes for selected observer locations. Its developer documents maps, polar plots, pass detail and optional radio or rotator control. AMSAT-UK explains the orbital elements that tracking tools use. Together these references help turn a vague idea that a satellite is overhead into a plan for when to listen, where to aim and which settings to verify.","canonicalUrl":"https://oz9aec.dk/gpredict/features.php","topics":["space-radio","maps-tracking","remote-control"],"tags":["Gpredict","satellite tracking","Doppler","TLE","maps","rotator"],"kind":"Guide","maturity":"Reference","level":"Beginner","sources":[{"label":"Gpredict: features","url":"https://oz9aec.dk/gpredict/features.php","type":"Developer","checkedAt":"2026-10-27T02:36:31.000Z","note":"Pass prediction, observer modules, element updates and radio/rotator-control capability."},{"label":"AMSAT-UK: satellite tracking","url":"https://amsat-uk.org/beginners/satellite-tracking/","type":"Official documentation","checkedAt":"2026-10-27T02:36:31.000Z","note":"Keplerian elements, pass-prediction tools and Doppler-tuning references."}],"body":[{"heading":"Check location, time and orbit data","text":"Set the intended observing location and ensure the computer clock is correct. Refresh orbital elements and inspect the predicted pass rather than relying on an old screenshot. Note the pass times and direction changes, then compare them with the obstructions around your actual operating position."},{"heading":"Separate prediction from equipment control","text":"A plotted track does not prove the satellite is transmitting or that a radio/rotator is connected correctly. Start by following predictions while receiving. If you later enable equipment control, confirm supported interfaces and Doppler behavior with the specific radio and application documentation before relying on automation."}],"caveats":["Platform packages and hardware compatibility require separate checks; no installation or control connection was tested."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:36:31.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:50:21.073Z","updatedAt":"2026-10-27T02:50:21.073Z"}},{"resourceId":"hackrf-pro-release-and-support","revision":1,"reason":"User-requested expansion: source-checked radio products and station-building references, with launch and preview status distinguished.","createdAt":"2026-10-27T02:48:48.141Z","record":{"id":"hackrf-pro-release-and-support","title":"HackRF Pro: a shipped SDR platform with an important support note","summary":"Great Scott Gadgets reported on January 16, 2026 that its prepaid reseller preorders for HackRF Pro had shipped. The product page lists half-duplex transmission or reception across 100 kHz to 6 GHz, USB-C and compatibility with existing HackRF software. A later March support notice identifies a USB-C connector issue on some units. Read both the capabilities and that support history when considering the platform.","canonicalUrl":"https://greatscottgadgets.com/2026/01-16-hackrf-pro-shipping-update/","topics":["sdr-discovery","antennas-diy"],"tags":["HackRF Pro","Great Scott Gadgets","SDR","USB-C","RF experiments","product announcement"],"kind":"News","maturity":"Reference","level":"Advanced","sources":[{"label":"Great Scott Gadgets shipping update","url":"https://greatscottgadgets.com/2026/01-16-hackrf-pro-shipping-update/","type":"Manufacturer","checkedAt":"2026-10-27T02:40:23.000Z","note":"January 16, 2026 reseller-preorder shipment statement."},{"label":"Great Scott Gadgets HackRF Pro product page","url":"https://greatscottgadgets.com/hackrf/pro/","type":"Manufacturer","checkedAt":"2026-10-27T02:40:23.000Z","note":"Coverage, half-duplex operation, USB-C, compatibility and accessories."},{"label":"Great Scott Gadgets USB-C support notice","url":"https://greatscottgadgets.com/2026/03-15-self-repair-guide-for-hackrf-pro-usb-c-connector/","type":"Manufacturer","checkedAt":"2026-10-27T02:40:23.000Z","note":"March 15, 2026 connector-contact issue affecting some units."}],"body":[{"heading":"Match the tool to the experiment","text":"HackRF Pro is a programmable RF peripheral for test and development, not an automatic replacement for a purpose-built communications receiver. Choose a lawful receive or controlled laboratory task, suitable software and appropriate accessories before judging whether its wide coverage is useful for your project."},{"heading":"Read support history before buying","text":"The manufacturer’s March notice describes a connector-contact problem affecting some units and publishes guidance. Check the applicable support route and hardware condition rather than assuming every unit is affected or that a launch announcement proves fault-free operation. No repair was attempted here."}],"caveats":["The shipping statement describes January 2026 reseller orders, not today’s stock.","No bench test was performed; transmit capability does not itself grant operating permission."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:40:23.000Z","sourcePublishedAt":"2026-01-16T00:00:00.000Z","status":"published","revision":1,"createdAt":"2026-10-27T02:48:48.141Z","updatedAt":"2026-10-27T02:48:48.141Z"}},{"resourceId":"heltec-mesh-node-t096","revision":1,"reason":"User-requested ten-shelf expansion: mesh hardware, mapping, field networks and satellite learning; source-checked original guidance.","createdAt":"2026-10-27T02:50:42.414Z","record":{"id":"heltec-mesh-node-t096","title":"Heltec Mesh Node T096: a small board for mesh and location projects","summary":"Heltec's Mesh Node T096 puts an nRF52840 controller, an SX1262 LoRa radio and UC6580 satellite positioning on one development board. The manufacturer lists Meshtastic and MeshCore compatibility, Bluetooth and battery-management features. For a builder, the appeal is combining communications and location hardware in a compact starting point. Treat it as a board that needs a complete deployment plan, including suitable firmware, power, enclosure and antenna arrangements.","canonicalUrl":"https://heltec.org/project/t096/","topics":["mesh-radio","maps-tracking","antennas-diy","portable-field"],"tags":["Heltec","T096","nRF52840","GNSS","Meshtastic","MeshCore","Product guide"],"kind":"Guide","maturity":"Reference","level":"Intermediate","sources":[{"label":"Heltec T096 product and specification","url":"https://heltec.org/project/t096/","type":"Manufacturer","checkedAt":"2026-10-27T02:36:30.000Z","note":"Confirms named chips, interfaces and intended firmware ecosystems; performance language remains a manufacturer claim."},{"label":"Heltec T096 documentation","url":"https://wiki.heltec.org/docs/devices/open-source-hardware/nrf52840-series/t096/","type":"Manufacturer","checkedAt":"2026-10-27T02:36:30.000Z","note":"Confirms nRF52840 and GNSS; generic Wi-Fi bullet conflicts with other descriptions and is not repeated."}],"body":[{"heading":"Compare the complete node","text":"The product page identifies USB-C power, a lithium-battery connector, a solar connector and antenna connections. Check the actual package contents and board revision before buying accessories. A connection labeled solar is not a promise that an arbitrary panel is compatible; use the manufacturer's electrical specifications for the exact hardware."},{"heading":"Choose the intended network","text":"Manufacturer support for two firmware ecosystems does not mean two differently configured groups automatically communicate. Identify the firmware target and intended group first. For location use, verify a genuine outdoor position fix before evaluating reports received elsewhere. Published transmitter capability also does not establish the power allowed in your region."}],"caveats":["No release date, battery endurance or independent range result was established.","The documentation has inconsistent Wi-Fi wording; this entry relies only on the consistently documented Bluetooth, LoRa and GNSS functions."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:36:30.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:50:42.414Z","updatedAt":"2026-10-27T02:50:42.414Z"}},{"resourceId":"icom-ic7110-announcement","revision":1,"reason":"Initial collection: primary-source research checked October 26, 2026.","createdAt":"2026-10-27T00:44:50.997Z","record":{"id":"icom-ic7110-announcement","title":"Icom's IC-7110 announcement connects D-STAR, HF and digital modes","summary":"Icom's Ham Fair 2026 announcement presents the IC-7110 as an all-mode radio spanning HF and higher amateur bands. Its listed features include D-STAR, a spectrum scope and waterfall, a CW decoder and simplified FT8 configuration. The announcement shows how traditional operating, digital voice and software-assisted modes can meet in one station concept, while leaving delivery and final specification checks to later product updates.","canonicalUrl":"https://www.icomjapan.com/news/4741/","topics":["digital-voice","hf-digital","cw-morse","sdr-discovery"],"tags":["Icom","IC-7110","D-STAR","FT8","CW","transceiver"],"kind":"News","maturity":"Experimental","level":"Intermediate","sources":[{"label":"Icom IC-7110 announcement","url":"https://www.icomjapan.com/news/4741/","type":"Manufacturer","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."}],"body":[],"caveats":["This source is a pre-release announcement, not an availability or shipping confirmation.","Features are manufacturer statements; no independent performance test was reviewed.","Band coverage can differ by regional version."],"reactions":[],"media":null,"attachments":[{"label":"Radcom signal observation worksheet (TXT)","url":"/hot-topics-downloads/signal-observation.txt","hosted":true,"license":"Radcom original · CC BY 4.0"}],"checkedAt":"2026-10-27T00:18:03.810Z","sourcePublishedAt":"2026-09-04T12:00:00.000Z","status":"published","revision":1,"createdAt":"2026-10-27T00:44:50.997Z","updatedAt":"2026-10-27T00:44:50.997Z"}},{"resourceId":"icom-ic7110-announcement","revision":2,"reason":"Worksheet reuse notice clarified (v2); factual source checks unchanged.","createdAt":"2026-10-27T02:11:14.321Z","record":{"id":"icom-ic7110-announcement","title":"Icom's IC-7110 announcement connects D-STAR, HF and digital modes","summary":"Icom's Ham Fair 2026 announcement presents the IC-7110 as an all-mode radio spanning HF and higher amateur bands. Its listed features include D-STAR, a spectrum scope and waterfall, a CW decoder and simplified FT8 configuration. The announcement shows how traditional operating, digital voice and software-assisted modes can meet in one station concept, while leaving delivery and final specification checks to later product updates.","canonicalUrl":"https://www.icomjapan.com/news/4741/","topics":["digital-voice","hf-digital","cw-morse","sdr-discovery"],"tags":["Icom","IC-7110","D-STAR","FT8","CW","transceiver"],"kind":"News","maturity":"Experimental","level":"Intermediate","sources":[{"label":"Icom IC-7110 announcement","url":"https://www.icomjapan.com/news/4741/","type":"Manufacturer","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."}],"body":[],"caveats":["This source is a pre-release announcement, not an availability or shipping confirmation.","Features are manufacturer statements; no independent performance test was reviewed.","Band coverage can differ by regional version."],"reactions":[],"media":null,"attachments":[{"label":"Radcom signal observation worksheet (TXT, v2)","url":"/hot-topics-downloads/signal-observation.txt","hosted":true,"license":"Radcom original · CC BY 4.0"}],"checkedAt":"2026-10-27T00:18:03.810Z","sourcePublishedAt":"2026-09-04T12:00:00.000Z","status":"published","revision":2,"createdAt":"2026-10-27T00:44:50.997Z","updatedAt":"2026-10-27T02:11:14.321Z"}},{"resourceId":"icom-id5200a-dstar-aprs-reference","revision":1,"reason":"November 6 primary-source product reference: original August announcement date, documented D-STAR capabilities, PC KISS/APRS versus future built-in APRS distinction, dated firmware caveats. No media uploads or stock/performance claims.","createdAt":"2026-11-06T13:03:17.968Z","record":{"id":"icom-id5200a-dstar-aprs-reference","title":"Icom ID-5200A: D-STAR features and the APRS firmware boundary","summary":"Icom listed the ID-5200A in its August 21, 2026 news index. Its product documentation describes a VHF/UHF D-STAR mobile with dual DV reception, a colour touchscreen and Wi-Fi connectivity. This is an established product reference; the announcement date is not evidence of stock or a new November launch.","canonicalUrl":"https://www.icomjapan.com/lineup/products/ID-5200A/","topics":["digital-voice","maps-tracking","remote-control"],"tags":["Icom","ID-5200A","D-STAR","APRS","KISS TNC","firmware","mobile radio"],"kind":"Guide","maturity":"Reference","level":"Intermediate","sources":[{"label":"Icom — ID-5200A product documentation","url":"https://www.icomjapan.com/lineup/products/ID-5200A/","type":"Manufacturer","checkedAt":"2026-11-06T13:03:17.000Z","note":"Documented D-STAR capabilities; distinguishes PC APRS via KISS TNC from future built-in APRS support."},{"label":"Icom — dated news index","url":"https://www.icomjapan.com/news/","type":"Manufacturer","checkedAt":"2026-11-06T13:03:17.000Z","note":"August 21, 2026 product announcement listing; not a shipping date."},{"label":"Icom — ID-5200A/E firmware 1.10","url":"https://www.icomjapan.com/support/firmware_driver/4752/","type":"Manufacturer","checkedAt":"2026-11-06T13:03:17.000Z","note":"September 18, 2026 update notes cover online updating, DV monitoring and KISS packet fixes; backup precautions."}],"body":[{"heading":"Separate current packet support from planned features","text":"Icom says the built-in KISS-mode TNC supports APRS operation from a PC from the first production run. The same page labels built-in APRS support as a future firmware feature. Do not treat those two operating paths as interchangeable."},{"heading":"Match firmware and network requirements","text":"Firmware 1.10's September 18 notes describe fixes for DV repeater-monitor audio and KISS-mode packet transmission. Follow the manufacturer's backup guidance before updating. D-STAR Terminal and Access Point modes use an internet connection; Icom does not guarantee reception of every call."}],"caveats":["Manufacturer descriptions and fixes are not independent Radcom tests. No radio was operated or firmware installed.","Check the exact regional model, firmware and original manuals. Future-feature wording is not a release commitment."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-11-06T13:03:17.000Z","sourcePublishedAt":"2026-08-21T00:00:00.000Z","status":"published","revision":1,"createdAt":"2026-11-06T13:03:17.968Z","updatedAt":"2026-11-06T13:03:17.968Z"}},{"resourceId":"js8call-keyboard-hf","revision":1,"reason":"Initial collection: primary-source research checked October 26, 2026.","createdAt":"2026-10-27T00:44:48.692Z","record":{"id":"js8call-keyboard-hf","title":"JS8Call: put a keyboard conversation on HF","summary":"JS8Call's project site describes keyboard messaging over HF, with directed messages, relaying, store-and-forward features, and station discovery. Its current site presents JS8Call-Improved as a community-developed continuation and links to downloads and discussion. It is a natural next resource for operators who enjoy weak-signal modes and want to exchange more conversational text. Use the project documentation to distinguish which functions are enabled and supported in your selected build.","canonicalUrl":"https://js8call.com/","topics":["hf-digital","portable-field"],"tags":["JS8","JS8Call","HF","text messaging","store and forward","off-grid"],"kind":"Project","maturity":"Reference","level":"Intermediate","sources":[{"label":"JS8Call project","url":"https://js8call.com/","type":"Developer","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."}],"body":[],"caveats":["The project's range, sensitivity, and interoperability descriptions are developer claims; they were not field-tested here.","HF propagation and available stations determine whether a message can travel; do not promise delivery or emergency-service reliability.","The site advertises a July 12, 2026 release; this entry avoids claiming it is the newest build without checking its release repository."],"reactions":[],"media":{"src":"/hot-topics-media/icom705.jpg","alt":"ICOM IC-705 (illustrative equipment photograph).","credit":"Batchman99 / Wikimedia Commons","license":"CC BY-SA 4.0","licenseUrl":"https://creativecommons.org/licenses/by-sa/4.0/","sourceUrl":"https://commons.wikimedia.org/wiki/File:ICOM_IC-705.jpg"},"attachments":[{"label":"Radcom field-session checklist (TXT)","url":"/hot-topics-downloads/field-checklist.txt","hosted":true,"license":"Radcom original · CC BY 4.0"}],"checkedAt":"2026-10-27T00:18:03.810Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T00:44:48.692Z","updatedAt":"2026-10-27T00:44:48.692Z"}},{"resourceId":"js8call-keyboard-hf","revision":2,"reason":"Worksheet reuse notice clarified (v2); factual source checks unchanged.","createdAt":"2026-10-27T02:12:05.130Z","record":{"id":"js8call-keyboard-hf","title":"JS8Call: put a keyboard conversation on HF","summary":"JS8Call's project site describes keyboard messaging over HF, with directed messages, relaying, store-and-forward features, and station discovery. Its current site presents JS8Call-Improved as a community-developed continuation and links to downloads and discussion. It is a natural next resource for operators who enjoy weak-signal modes and want to exchange more conversational text. Use the project documentation to distinguish which functions are enabled and supported in your selected build.","canonicalUrl":"https://js8call.com/","topics":["hf-digital","portable-field"],"tags":["JS8","JS8Call","HF","text messaging","store and forward","off-grid"],"kind":"Project","maturity":"Reference","level":"Intermediate","sources":[{"label":"JS8Call project","url":"https://js8call.com/","type":"Developer","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."}],"body":[],"caveats":["The project's range, sensitivity, and interoperability descriptions are developer claims; they were not field-tested here.","HF propagation and available stations determine whether a message can travel; do not promise delivery or emergency-service reliability.","The site advertises a July 12, 2026 release; this entry avoids claiming it is the newest build without checking its release repository."],"reactions":[],"media":{"src":"/hot-topics-media/icom705.jpg","alt":"ICOM IC-705 (illustrative equipment photograph).","credit":"Batchman99 / Wikimedia Commons","license":"CC BY-SA 4.0","licenseUrl":"https://creativecommons.org/licenses/by-sa/4.0/","sourceUrl":"https://commons.wikimedia.org/wiki/File:ICOM_IC-705.jpg"},"attachments":[{"label":"Radcom field-session checklist (TXT, v2)","url":"/hot-topics-downloads/field-checklist.txt","hosted":true,"license":"Radcom original · CC BY 4.0"}],"checkedAt":"2026-10-27T00:18:03.810Z","sourcePublishedAt":null,"status":"published","revision":2,"createdAt":"2026-10-27T00:44:48.692Z","updatedAt":"2026-10-27T02:12:05.130Z"}},{"resourceId":"kenwood-thd75-dstar-aprs-paths","revision":1,"reason":"User-requested expansion: source-checked radio products and station-building references, with launch and preview status distinguished.","createdAt":"2026-10-27T02:48:51.161Z","record":{"id":"kenwood-thd75-dstar-aprs-paths","title":"Kenwood TH-D75: D-STAR, APRS and a separate gateway workflow","summary":"Kenwood’s TH-D75A/E manual brings together D-STAR voice, APRS and computer-connected packet functions. It also documents DV Gateway mode, which uses a Windows or Android device with a third-party application over USB or Bluetooth for an internet D-STAR path. That gateway arrangement is distinct from ordinary repeater operation. This is an established-radio reference grounded in the manual, not an announcement of a new model.","canonicalUrl":"https://kasc.kenwood.com/files/prod/3692/5/THD75E_User_manuals_English.pdf","topics":["digital-voice","maps-tracking","portable-field"],"tags":["Kenwood","TH-D75","D-STAR","APRS","Bluetooth","KISS","product spotlight"],"kind":"Guide","maturity":"Reference","level":"Intermediate","sources":[{"label":"Kenwood TH-D75A/E official user manual","url":"https://kasc.kenwood.com/files/prod/3692/5/THD75E_User_manuals_English.pdf","type":"Manufacturer","checkedAt":"2026-10-27T02:40:23.000Z","note":"APRS/packet sections, USB/Bluetooth interface limits and DV Gateway mode on manual pages 12-12 and 16-13."}],"body":[{"heading":"Choose one workflow first","text":"Start with the job: local voice, an APRS position/message workflow, or a D-STAR internet gateway. Read the corresponding manual section and its interface settings. The presence of Bluetooth does not mean every connected device or operating mode can use the same connection simultaneously."},{"heading":"Check companion software","text":"Kenwood says it does not supply the third-party application used for DV Gateway communication. Verify that application’s platform and registration requirements separately. Review location settings before enabling automatic position transmission, particularly when the radio is used around home or other private places."}],"caveats":["The manufacturer’s main product site was under maintenance; the official support-hosted manual was accessible.","No gateway, Bluetooth pairing or APRS transmission was tested."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:40:23.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:48:51.161Z","updatedAt":"2026-10-27T02:48:51.161Z"}},{"resourceId":"krakensdr-bearing-basics","revision":1,"reason":"Initial collection: primary-source research checked October 26, 2026.","createdAt":"2026-10-27T00:44:49.955Z","record":{"id":"krakensdr-bearing-basics","title":"Direction finding needs bearings, an antenna array and a map","summary":"KrakenRF explains how a coherent SDR compares signals from an antenna array to estimate a transmitter's direction. Its overview separates the radio receiver and signal-processing hardware from the mapping application that plots bearings. It also lists the supporting equipment for a KrakenSDR setup, making the page a useful starting point for understanding why a phone map alone cannot perform radio direction finding.","canonicalUrl":"https://www.krakenrf.com/about-krakensdr","topics":["maps-tracking","sdr-discovery","antennas-diy"],"tags":["KrakenSDR","RDF","direction finding","coherent SDR","antenna array","fox hunting"],"kind":"Guide","maturity":"Reference","level":"Beginner","sources":[{"label":"KrakenRF technical overview","url":"https://www.krakenrf.com/about-krakensdr","type":"Manufacturer","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."}],"body":[],"caveats":["This is manufacturer documentation, not an independent accuracy test.","A bearing is a direction estimate; locating a transmitter requires additional observations and suitable geometry.","The manufacturer's cloud mapper is labeled alpha on the checked page."],"reactions":[],"media":null,"attachments":[{"label":"Radcom signal observation worksheet (TXT)","url":"/hot-topics-downloads/signal-observation.txt","hosted":true,"license":"Radcom original · CC BY 4.0"}],"checkedAt":"2026-10-27T00:18:03.810Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T00:44:49.955Z","updatedAt":"2026-10-27T00:44:49.955Z"}},{"resourceId":"krakensdr-bearing-basics","revision":2,"reason":"Worksheet reuse notice clarified (v2); factual source checks unchanged.","createdAt":"2026-10-27T02:11:49.025Z","record":{"id":"krakensdr-bearing-basics","title":"Direction finding needs bearings, an antenna array and a map","summary":"KrakenRF explains how a coherent SDR compares signals from an antenna array to estimate a transmitter's direction. Its overview separates the radio receiver and signal-processing hardware from the mapping application that plots bearings. It also lists the supporting equipment for a KrakenSDR setup, making the page a useful starting point for understanding why a phone map alone cannot perform radio direction finding.","canonicalUrl":"https://www.krakenrf.com/about-krakensdr","topics":["maps-tracking","sdr-discovery","antennas-diy"],"tags":["KrakenSDR","RDF","direction finding","coherent SDR","antenna array","fox hunting"],"kind":"Guide","maturity":"Reference","level":"Beginner","sources":[{"label":"KrakenRF technical overview","url":"https://www.krakenrf.com/about-krakensdr","type":"Manufacturer","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."}],"body":[],"caveats":["This is manufacturer documentation, not an independent accuracy test.","A bearing is a direction estimate; locating a transmitter requires additional observations and suitable geometry.","The manufacturer's cloud mapper is labeled alpha on the checked page."],"reactions":[],"media":null,"attachments":[{"label":"Radcom signal observation worksheet (TXT, v2)","url":"/hot-topics-downloads/signal-observation.txt","hosted":true,"license":"Radcom original · CC BY 4.0"}],"checkedAt":"2026-10-27T00:18:03.810Z","sourcePublishedAt":null,"status":"published","revision":2,"createdAt":"2026-10-27T00:44:49.955Z","updatedAt":"2026-10-27T02:11:49.025Z"}},{"resourceId":"lance-atak-over-mesh","revision":1,"reason":"Initial collection: primary-source research checked October 26, 2026.","createdAt":"2026-10-27T00:44:50.365Z","record":{"id":"lance-atak-over-mesh","title":"ATAK over LoRa: where LANCE fits","summary":"LANCE describes an ATAK plugin that connects directly to a Meshtastic or MeshCore radio and carries positions and other map objects over LoRa. It offers a practical example of mapping software meeting low-bandwidth radio links. Its documentation distinguishes Bluetooth and USB options and explains that a team must select one radio protocol for peers to exchange data over the air.","canonicalUrl":"https://lanceplugin.com/features-atak-over-mesh","topics":["maps-tracking","mesh-radio","portable-field"],"tags":["ATAK","LANCE","Meshtastic","MeshCore","LoRa","mapping"],"kind":"Project","maturity":"Experimental","level":"Intermediate","sources":[{"label":"LANCE ATAK-over-mesh documentation","url":"https://lanceplugin.com/features-atak-over-mesh","type":"Developer","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."}],"body":[],"caveats":["Meshtastic and MeshCore do not become one interoperable over-the-air mesh through this plugin.","These are developer-documented capabilities; this library has not performed a hardware field test.","The developer says USB hardware validation is ongoing and some connection options depend on edition.","The plugin can change radio configuration; read its setup behavior before using an established node."],"reactions":[],"media":null,"attachments":[{"label":"Radcom field-session checklist (TXT)","url":"/hot-topics-downloads/field-checklist.txt","hosted":true,"license":"Radcom original · CC BY 4.0"}],"checkedAt":"2026-10-27T00:18:03.810Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T00:44:50.365Z","updatedAt":"2026-10-27T00:44:50.365Z"}},{"resourceId":"lance-atak-over-mesh","revision":2,"reason":"Worksheet reuse notice clarified (v2); factual source checks unchanged.","createdAt":"2026-10-27T02:11:21.623Z","record":{"id":"lance-atak-over-mesh","title":"ATAK over LoRa: where LANCE fits","summary":"LANCE describes an ATAK plugin that connects directly to a Meshtastic or MeshCore radio and carries positions and other map objects over LoRa. It offers a practical example of mapping software meeting low-bandwidth radio links. Its documentation distinguishes Bluetooth and USB options and explains that a team must select one radio protocol for peers to exchange data over the air.","canonicalUrl":"https://lanceplugin.com/features-atak-over-mesh","topics":["maps-tracking","mesh-radio","portable-field"],"tags":["ATAK","LANCE","Meshtastic","MeshCore","LoRa","mapping"],"kind":"Project","maturity":"Experimental","level":"Intermediate","sources":[{"label":"LANCE ATAK-over-mesh documentation","url":"https://lanceplugin.com/features-atak-over-mesh","type":"Developer","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."}],"body":[],"caveats":["Meshtastic and MeshCore do not become one interoperable over-the-air mesh through this plugin.","These are developer-documented capabilities; this library has not performed a hardware field test.","The developer says USB hardware validation is ongoing and some connection options depend on edition.","The plugin can change radio configuration; read its setup behavior before using an established node."],"reactions":[],"media":null,"attachments":[{"label":"Radcom field-session checklist (TXT, v2)","url":"/hot-topics-downloads/field-checklist.txt","hosted":true,"license":"Radcom original · CC BY 4.0"}],"checkedAt":"2026-10-27T00:18:03.810Z","sourcePublishedAt":null,"status":"published","revision":2,"createdAt":"2026-10-27T00:44:50.365Z","updatedAt":"2026-10-27T02:11:21.623Z"}},{"resourceId":"lcwo-browser-cw","revision":1,"reason":"Initial collection: primary-source research checked October 26, 2026.","createdAt":"2026-10-27T00:44:48.048Z","record":{"id":"lcwo-browser-cw","title":"Build a daily Morse habit with LCWO","summary":"Learn CW Online offers a browser-based Koch course plus callsign, word, plain-text, and code-group practice. The service also lists downloadable MP3 exercises and a text-to-CW tool. An account can keep practice settings and track progress, making it a useful companion to time spent listening on the bands. Begin with a manageable routine and choose exercises that match the kind of operating you want to do.","canonicalUrl":"https://lcwo.net/","topics":["cw-morse"],"tags":["CW","Morse","Koch","training","browser","audio"],"kind":"Guide","maturity":"Reference","level":"Beginner","sources":[{"label":"Learn CW Online","url":"https://lcwo.net/","type":"Developer","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."}],"body":[],"caveats":["An account is needed for saved personal progress; the text-to-CW tool is listed as usable without login.","This entry verifies advertised features, not a completed training session or learning outcome."],"reactions":[],"media":{"src":"/hot-topics-media/morse-key.jpg","alt":"Wooden-based Morse key (illustrative equipment photograph).","credit":"Lauren.mcalary / Wikimedia Commons","license":"CC BY-SA 4.0","licenseUrl":"https://creativecommons.org/licenses/by-sa/4.0/","sourceUrl":"https://commons.wikimedia.org/wiki/File:Morse_Key.jpg"},"attachments":[],"checkedAt":"2026-10-27T00:18:03.810Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T00:44:48.048Z","updatedAt":"2026-10-27T00:44:48.048Z"}},{"resourceId":"mat-80-tuner-family-preview","revision":1,"reason":"User-requested expansion including magnetic loops, Buckmaster OCF, G5RV history and digital voice; original sourced prose, no copied media.","createdAt":"2026-10-27T02:49:24.092Z","record":{"id":"mat-80-tuner-family-preview","title":"mAT-80 tuner family: announced variants and remaining questions","summary":"The mAT-80 manufacturer page previews a family of automatic antenna tuners rather than documenting a universally shipping product. It marks the mAT-80R remote version and mAT-80M Icom version as coming soon, with a Yaesu version planned. The stated coverage is 1.8–54 MHz. This is a product-watch entry for operators evaluating a future tuner location, control connection and operating duty cycle.","canonicalUrl":"https://www.mat-tuner.com/mAT-80.php","topics":["antennas-diy","remote-control"],"tags":["mAT-TUNER","mAT-80","automatic tuner","product preview","remote tuner"],"kind":"News","maturity":"Experimental","level":"Intermediate","sources":[{"label":"mAT-80 manufacturer preview","url":"https://www.mat-tuner.com/mAT-80.php","type":"Manufacturer","checkedAt":"2026-10-27T02:46:06.000Z","note":"Coming-soon and planned labels checked."}],"body":[{"heading":"Follow the variant, not just the family","text":"The remote version is described as carrying RF and DC along the coax through a bias-tee arrangement. Radio-specific versions use different control approaches. Identify the exact model and supported radio before planning cables or automation; a family announcement does not establish that all variants share the same interface or release schedule."},{"heading":"Read mode ratings carefully","text":"The page distinguishes 200 watts for SSB from 100 watts for FT8, RTTY and FM. Keep operating mode and sustained duty cycle in the comparison. An advertised impedance range describes matching capability under stated conditions; it does not guarantee efficient radiation or successful matching for every wire and installation."}],"caveats":["Preview only: no firm release date verified. Specifications and availability may change."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:46:06.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:49:24.092Z","updatedAt":"2026-10-27T02:49:24.092Z"}},{"resourceId":"mat-sw600-hf-power-swr-meter","revision":1,"reason":"User-requested expansion including magnetic loops, Buckmaster OCF, G5RV history and digital voice; original sourced prose, no copied media.","createdAt":"2026-10-27T02:49:27.058Z","record":{"id":"mat-sw600-hf-power-swr-meter","title":"mAT-SW600: an HF power and SWR meter with a charging caveat","summary":"The mAT-SW600 is an inline HF power and SWR meter that the manufacturer labels as a new arrival, without a dated launch notice on the checked page. Its listed range is 1.8–30 MHz, with automatic power ranges and a color display. This is a useful accessory reference for monitoring a station, provided its role is kept separate from antenna impedance analysis or receiver protection.","canonicalUrl":"https://www.mat-tuner.com/mAT-SW600.php","topics":["antennas-diy","hf-digital"],"tags":["mAT-TUNER","mAT-SW600","SWR meter","wattmeter","station accessories"],"kind":"Guide","maturity":"Reference","level":"Intermediate","sources":[{"label":"mAT-SW600 manufacturer specifications","url":"https://www.mat-tuner.com/mAT-SW600.php","type":"Manufacturer","checkedAt":"2026-10-27T02:46:06.000Z","note":"Includes explicit charging restriction."}],"body":[{"heading":"Use the display for the right question","text":"Forward-power and SWR readings help observe what happens as the station changes frequency or operating conditions. They do not identify every source of feed-line loss or explain the full antenna impedance. Follow the specified connection direction and limits, and interpret readings in the context of the meter’s position in the system."},{"heading":"Plan charging outside operating time","text":"The meter uses rechargeable cells and USB-C charging. The manufacturer specifically says it should not operate while charging because RF can affect the charging circuit. Make that restriction part of the station checklist, particularly when the display will be used during long sessions or installed among permanently connected accessories."}],"caveats":["No dated release verified. Accuracy claims are manufacturer specifications, not independent test results."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:46:06.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:49:27.058Z","updatedAt":"2026-10-27T02:49:27.058Z"}},{"resourceId":"meshcore-companion-repeat","revision":1,"reason":"Initial collection: primary-source research checked October 26, 2026.","createdAt":"2026-10-27T00:44:51.623Z","record":{"id":"meshcore-companion-repeat","title":"A temporary relay for a MeshCore field group","summary":"Seeed Studio describes using Companion Repeat Mode on three Wio Tracker L1 Pro devices during a field test. A middle device forwarded messages while retaining Companion firmware. Moving that relay to a higher, more open location improved message delivery in the reported test. The practical lesson is to plan matching radio settings and relay placement before heading beyond existing coverage.","canonicalUrl":"https://blog.meshcore.io/2026/10/23/repeat-mode-tracker-l1-pro","topics":["mesh-radio","portable-field"],"tags":["MeshCore","Wio Tracker L1 Pro","relay","off-grid","field test"],"kind":"Field report","maturity":"Reference","level":"Beginner","sources":[{"label":"MeshCore Blog / Seeed Studio","url":"https://blog.meshcore.io/2026/10/23/repeat-mode-tracker-l1-pro","type":"Manufacturer","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."}],"body":[],"caveats":["The article is a manufacturer-authored demonstration, not an independent review.","Repeat Mode is limited to supported off-grid configurations; it is not a blanket setting for every public mesh.","A mobile battery-powered relay is not a replacement for fixed repeater infrastructure."],"reactions":[],"media":{"src":"/hot-topics-media/wio-l1-pro-rooftop.jpg","alt":"Wio Tracker L1 Pro running mesh firmware on the DB0IL radio-site roof (illustrative photograph).","credit":"Fabian Horst / Wikimedia Commons","license":"CC BY 4.0","licenseUrl":"https://creativecommons.org/licenses/by/4.0/","sourceUrl":"https://commons.wikimedia.org/wiki/File:2026-03-15-Wio-Tracker-L1-Pro-MeshCore-at-DB0IL-0.jpg"},"attachments":[{"label":"Radcom field-session checklist (TXT)","url":"/hot-topics-downloads/field-checklist.txt","hosted":true,"license":"Radcom original · CC BY 4.0"}],"checkedAt":"2026-10-27T00:18:03.810Z","sourcePublishedAt":"2026-10-23T12:00:00.000Z","status":"published","revision":1,"createdAt":"2026-10-27T00:44:51.623Z","updatedAt":"2026-10-27T00:44:51.623Z"}},{"resourceId":"meshcore-companion-repeat","revision":2,"reason":"Worksheet reuse notice clarified (v2); factual source checks unchanged.","createdAt":"2026-10-27T02:11:07.692Z","record":{"id":"meshcore-companion-repeat","title":"A temporary relay for a MeshCore field group","summary":"Seeed Studio describes using Companion Repeat Mode on three Wio Tracker L1 Pro devices during a field test. A middle device forwarded messages while retaining Companion firmware. Moving that relay to a higher, more open location improved message delivery in the reported test. The practical lesson is to plan matching radio settings and relay placement before heading beyond existing coverage.","canonicalUrl":"https://blog.meshcore.io/2026/10/23/repeat-mode-tracker-l1-pro","topics":["mesh-radio","portable-field"],"tags":["MeshCore","Wio Tracker L1 Pro","relay","off-grid","field test"],"kind":"Field report","maturity":"Reference","level":"Beginner","sources":[{"label":"MeshCore Blog / Seeed Studio","url":"https://blog.meshcore.io/2026/10/23/repeat-mode-tracker-l1-pro","type":"Manufacturer","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."}],"body":[],"caveats":["The article is a manufacturer-authored demonstration, not an independent review.","Repeat Mode is limited to supported off-grid configurations; it is not a blanket setting for every public mesh.","A mobile battery-powered relay is not a replacement for fixed repeater infrastructure."],"reactions":[],"media":{"src":"/hot-topics-media/wio-l1-pro-rooftop.jpg","alt":"Wio Tracker L1 Pro running mesh firmware on the DB0IL radio-site roof (illustrative photograph).","credit":"Fabian Horst / Wikimedia Commons","license":"CC BY 4.0","licenseUrl":"https://creativecommons.org/licenses/by/4.0/","sourceUrl":"https://commons.wikimedia.org/wiki/File:2026-03-15-Wio-Tracker-L1-Pro-MeshCore-at-DB0IL-0.jpg"},"attachments":[{"label":"Radcom field-session checklist (TXT, v2)","url":"/hot-topics-downloads/field-checklist.txt","hosted":true,"license":"Radcom original · CC BY 4.0"}],"checkedAt":"2026-10-27T00:18:03.810Z","sourcePublishedAt":"2026-10-23T12:00:00.000Z","status":"published","revision":2,"createdAt":"2026-10-27T00:44:51.623Z","updatedAt":"2026-10-27T02:11:07.692Z"}},{"resourceId":"meshcore-ripple-ui-123-maps","revision":1,"reason":"November 5 research: original concise account of dated developer firmware announcement, preserve map/download and profile-deprecation caveats; no assets, tests or hardware launch claim.","createdAt":"2026-11-05T13:04:18.317Z","record":{"id":"meshcore-ripple-ui-123-maps","title":"Ripple UI 12.3: map downloads and device-specific compass support","summary":"MeshCore firmware developer Scott Powell's November 3, 2026 announcement describes Ripple UI 12.3, including Wi-Fi map downloads, additional device support and crash fixes. It also begins retiring the older Ripple network profile type. This is a firmware announcement, not a new hardware launch.","canonicalUrl":"https://blog.meshcore.io/2026/11/03/ripple-12.3","topics":["mesh-radio","maps-tracking","portable-field"],"tags":["MeshCore","Ripple UI","12.3","maps","Wio Tracker L2 Pro","MeshPager X2","firmware"],"kind":"News","maturity":"Reference","level":"Intermediate","sources":[{"label":"MeshCore — Ripple UI v12.3","url":"https://blog.meshcore.io/2026/11/03/ripple-12.3","type":"Developer","checkedAt":"2026-11-05T13:03:57.000Z","note":"November 3 developer release announcement; map-download limits, device support and profile deprecation."}],"body":[{"heading":"Prepare maps before leaving connectivity","text":"Tiles download as you pan or zoom and are saved to the SD card; bulk downloading is not supported. On ePaper devices, downloads work with the colour tile-set option. Check that the needed area is saved before an outing."},{"heading":"Match features to hardware and profiles","text":"The announcement adds MeshPager X2 and Wio Tracker L2 Pro support. A stationary direction arrow requires a supported digital compass and calibration. Version 12.3 still loads existing Ripple profiles but prevents creating new ones; removal of remaining support is planned for later versions."}],"caveats":["No firmware was installed or radio tested. Developer crash-fix claims do not establish independent reliability.","Verify the exact device and firmware before updating; announced support does not establish hardware stock or delivery."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-11-05T13:03:57.000Z","sourcePublishedAt":"2026-11-03T00:00:00.000Z","status":"published","revision":1,"createdAt":"2026-11-05T13:04:18.317Z","updatedAt":"2026-11-05T13:04:18.317Z"}},{"resourceId":"meshtastic-28-alpha","revision":1,"reason":"Initial collection: primary-source research checked October 26, 2026.","createdAt":"2026-10-27T00:44:51.416Z","record":{"id":"meshtastic-28-alpha","title":"Meshtastic 2.8: what changes before you upgrade","summary":"Meshtastic's 2.8 announcement introduces packet signing, location-privacy changes and support for larger networks. It also explains why the first 2.8.0 build was revoked and replaced by 2.8.1. The project explicitly describes 2.8.1 as alpha software for testing, with configuration and identity changes that matter when upgrading an existing mesh. Read the migration notes before changing an established station.","canonicalUrl":"https://meshtastic.org/blog/lets-talk-about-2-8/","topics":["mesh-radio","maps-tracking","portable-field"],"tags":["Meshtastic","LoRa","firmware","2.8","packet signing","privacy"],"kind":"News","maturity":"Experimental","level":"Intermediate","sources":[{"label":"Meshtastic release explanation","url":"https://meshtastic.org/blog/lets-talk-about-2-8/","type":"Official documentation","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."},{"label":"YYCMesh field report","url":"https://yycmesh.com/blog/500khz-field-report","type":"Operator report","checkedAt":"2026-10-27T00:18:03.810Z","note":"An individual community report."}],"body":[],"caveats":["This is an alpha announcement, not a recommendation to upgrade a working field station.","The project's notice says 2.8.0 is revoked; do not present it as a current download.","Release status must be checked again when this entry is updated."],"reactions":[{"author":"YYCMesh, a Calgary community network","text":"YYCMesh reports useful operation with a 500 kHz configuration after broader infrastructure and antenna improvements. The authors describe observational evidence and do not isolate bandwidth as the cause of improved performance.","url":"https://yycmesh.com/blog/500khz-field-report"}],"media":{"src":"/hot-topics-media/meshtastic-solar-node.jpg","alt":"Components of a solar-powered Meshtastic node at temporärhaus (illustrative photograph).","credit":"-stk / Wikimedia Commons","license":"CC BY-SA 4.0","licenseUrl":"https://creativecommons.org/licenses/by-sa/4.0/","sourceUrl":"https://commons.wikimedia.org/wiki/File:2025-10_Meshtastic_Node_temporaerhaus_P1090099.jpg"},"attachments":[{"label":"Radcom field-session checklist (TXT)","url":"/hot-topics-downloads/field-checklist.txt","hosted":true,"license":"Radcom original · CC BY 4.0"}],"checkedAt":"2026-10-27T00:18:03.810Z","sourcePublishedAt":"2026-10-08T12:00:00.000Z","status":"published","revision":1,"createdAt":"2026-10-27T00:44:51.416Z","updatedAt":"2026-10-27T00:44:51.416Z"}},{"resourceId":"meshtastic-28-alpha","revision":2,"reason":"Worksheet reuse notice clarified (v2); factual source checks unchanged.","createdAt":"2026-10-27T02:11:11.477Z","record":{"id":"meshtastic-28-alpha","title":"Meshtastic 2.8: what changes before you upgrade","summary":"Meshtastic's 2.8 announcement introduces packet signing, location-privacy changes and support for larger networks. It also explains why the first 2.8.0 build was revoked and replaced by 2.8.1. The project explicitly describes 2.8.1 as alpha software for testing, with configuration and identity changes that matter when upgrading an existing mesh. Read the migration notes before changing an established station.","canonicalUrl":"https://meshtastic.org/blog/lets-talk-about-2-8/","topics":["mesh-radio","maps-tracking","portable-field"],"tags":["Meshtastic","LoRa","firmware","2.8","packet signing","privacy"],"kind":"News","maturity":"Experimental","level":"Intermediate","sources":[{"label":"Meshtastic release explanation","url":"https://meshtastic.org/blog/lets-talk-about-2-8/","type":"Official documentation","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."},{"label":"YYCMesh field report","url":"https://yycmesh.com/blog/500khz-field-report","type":"Operator report","checkedAt":"2026-10-27T00:18:03.810Z","note":"An individual community report."}],"body":[],"caveats":["This is an alpha announcement, not a recommendation to upgrade a working field station.","The project's notice says 2.8.0 is revoked; do not present it as a current download.","Release status must be checked again when this entry is updated."],"reactions":[{"author":"YYCMesh, a Calgary community network","text":"YYCMesh reports useful operation with a 500 kHz configuration after broader infrastructure and antenna improvements. The authors describe observational evidence and do not isolate bandwidth as the cause of improved performance.","url":"https://yycmesh.com/blog/500khz-field-report"}],"media":{"src":"/hot-topics-media/meshtastic-solar-node.jpg","alt":"Components of a solar-powered Meshtastic node at temporärhaus (illustrative photograph).","credit":"-stk / Wikimedia Commons","license":"CC BY-SA 4.0","licenseUrl":"https://creativecommons.org/licenses/by-sa/4.0/","sourceUrl":"https://commons.wikimedia.org/wiki/File:2025-10_Meshtastic_Node_temporaerhaus_P1090099.jpg"},"attachments":[{"label":"Radcom field-session checklist (TXT, v2)","url":"/hot-topics-downloads/field-checklist.txt","hosted":true,"license":"Radcom original · CC BY 4.0"}],"checkedAt":"2026-10-27T00:18:03.810Z","sourcePublishedAt":"2026-10-08T12:00:00.000Z","status":"published","revision":2,"createdAt":"2026-10-27T00:44:51.416Z","updatedAt":"2026-10-27T02:11:11.477Z"}},{"resourceId":"meshtastic-android-284-open-beta","revision":1,"reason":"Add verified October 31 Android open-beta announcement, explicitly separate from node firmware and rolling debug snapshots. Experimental label, variant limits and no testing claims; no duplicate in all 77 records.","createdAt":"2026-11-02T13:02:14.508Z","record":{"id":"meshtastic-android-284-open-beta","title":"Meshtastic Android 2.8.4 open beta: map and connection changes","summary":"The Meshtastic Android project's October 31, 2026 pre-release, v2.8.4-open.1, adds AR mesh views, a radio-connection Quick Settings tile and a Node Tracker widget. Its notes also describe fixes for USB recognition and app database recovery. These are client-application changes; the version number does not identify the firmware running on a radio node.","canonicalUrl":"https://github.com/meshtastic/Meshtastic-Android/releases/tag/v2.8.4-open.1","topics":["mesh-radio","maps-tracking"],"tags":["Meshtastic","Android","open beta","2.8.4","maps","USB","app"],"kind":"News","maturity":"Experimental","level":"Intermediate","sources":[{"label":"Meshtastic Android — v2.8.4-open.1","url":"https://github.com/meshtastic/Meshtastic-Android/releases/tag/v2.8.4-open.1","type":"Developer","checkedAt":"2026-11-02T13:01:39.000Z","note":"October 31 pre-release notes; app features and fixes, not a firmware release."}],"body":[{"heading":"Check the feature requirements","text":"The notes limit device-model placement in AR to the Google build variant. Do not assume every build or phone supports every listed display feature. Confirm the app build and connected node's firmware separately when troubleshooting."},{"heading":"Test before relying on it in the field","text":"Treat this as beta software. Verify connection, messaging and map behaviour on your own setup before a planned outing. Developer fix descriptions are not an independent reliability test or proof that a particular user's fault is resolved."}],"caveats":["No app was installed or radio operated for this entry.","The separate rolling snapshot is a debug build; it is not this versioned open-beta release."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-11-02T13:01:39.000Z","sourcePublishedAt":"2026-10-31T00:00:00.000Z","status":"published","revision":1,"createdAt":"2026-11-02T13:02:14.508Z","updatedAt":"2026-11-02T13:02:14.508Z"}},{"resourceId":"meshtastic-environment-telemetry","revision":1,"reason":"User-requested ten-shelf expansion: mesh hardware, mapping, field networks and satellite learning; source-checked original guidance.","createdAt":"2026-10-27T02:50:49.645Z","record":{"id":"meshtastic-environment-telemetry","title":"Meshtastic telemetry: what your node can measure, and what needs a sensor","summary":"Meshtastic can carry more than messages. Its documentation separates device information, such as battery and airtime, from environmental readings supplied by attached sensors. Temperature, humidity and pressure require appropriate hardware; enabling a menu cannot create a missing measurement. The supported-sensor list is the starting point for a field weather node or battery monitor, followed by checking the board's connections and the firmware and app versions actually in use.","canonicalUrl":"https://meshtastic.org/docs/configuration/module/telemetry/","topics":["mesh-radio","antennas-diy","portable-field"],"tags":["Meshtastic","telemetry","sensors","BME280","battery","temperature","humidity"],"kind":"Guide","maturity":"Reference","level":"Intermediate","sources":[{"label":"Meshtastic Telemetry Module Configuration","url":"https://meshtastic.org/docs/configuration/module/telemetry/","type":"Official documentation","checkedAt":"2026-10-27T02:36:30.000Z","note":"Distinguishes device/environment measurements, supported sensors and enable settings."},{"label":"Meshtastic Android Telemetry & Sensors","url":"https://meshtastic.org/docs/software/android/user/telemetry-and-sensors/","type":"Official documentation","checkedAt":"2026-10-27T02:36:30.000Z","note":"Explains telemetry display, empty rows and reporting behavior."}],"body":[{"heading":"Build one measurement at a time","text":"The official table lists a BME280 for temperature, humidity and pressure, and INA-family devices for voltage or current measurements. Our suggested workflow is to verify one supported sensor locally before sending its readings over the mesh. Keep the measurement units and observation time with the result, especially when comparing two locations."},{"heading":"Read an empty display carefully","text":"The Android guide explains that a telemetry row fills after that category of data arrives. An empty row is therefore not proof that a sensor is absent. Check whether the relevant telemetry group is enabled and whether any report arrived. Use an update interval suited to the task rather than generating needless traffic."}],"caveats":["Sensor support and controls vary with firmware, board and client versions.","No sensor accuracy, calibration or life-safety suitability was tested. Environmental displays are not a substitute for certified warning equipment."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:36:30.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:50:49.645Z","updatedAt":"2026-10-27T02:50:49.645Z"}},{"resourceId":"meshtastic-find-local-mesh","revision":1,"reason":"Source-checked original addition for mesh/mapping and portable preparation; explicitly dated guide or development preview, no new hosted media or copied source material.","createdAt":"2026-10-29T12:04:06.573Z","record":{"id":"meshtastic-find-local-mesh","title":"Meshtastic: why a connected node may hear no local mesh","summary":"A phone connection proves that the app can reach your node, not that the node can reach other radios. Meshtastic's October 12, 2026 guide explains how mismatched LoRa presets and frequency settings can leave a working node silent. It also distinguishes stored node names from recent reception and explains the limits of public-mesh discovery.","canonicalUrl":"https://meshtastic.org/blog/finding-your-local-mesh/","topics":["mesh-radio","portable-field"],"tags":["Meshtastic","LoRa","discovery","presets","troubleshooting","node list"],"kind":"Guide","maturity":"Reference","level":"Beginner","sources":[{"label":"Meshtastic — Why your new node might not see your local mesh","url":"https://meshtastic.org/blog/finding-your-local-mesh/","type":"Developer","checkedAt":"2026-10-29T12:03:49.419Z","note":"October 12, 2026 guide: preset/frequency matching, stored node history, public discovery limits and recipient acknowledgments."}],"body":[{"heading":"Compare settings before replacing hardware","text":"Confirm your region and compare the modem preset and frequency slot with the local group's settings. A node list can retain devices heard before a configuration change; inspect last-heard information rather than treating every saved name as reachable."},{"heading":"Know what a successful check means","text":"The guide describes discovery scans of default public channels; custom channel settings can remain invisible. An empty result does not establish that no local mesh exists. For a consenting contact, a direct-message recipient acknowledgment is stronger evidence of delivery than a channel message merely being repeated nearby."}],"caveats":["Client and firmware support vary. This guide does not rule out antenna, power or hardware faults.","No scan or radio contact was performed."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-29T12:03:49.419Z","sourcePublishedAt":"2026-10-12T00:00:00.000Z","status":"published","revision":1,"createdAt":"2026-10-29T12:04:06.573Z","updatedAt":"2026-10-29T12:04:06.573Z"}},{"resourceId":"meshtastic-sdr-reception-project","revision":1,"reason":"Initial collection: primary-source research checked October 26, 2026.","createdAt":"2026-10-27T00:44:49.540Z","record":{"id":"meshtastic-sdr-reception-project","title":"Study your mesh signals with an SDR receiver","summary":"The meshtastic-sniffer project documents passive reception of Meshtastic LoRa traffic using supported SDR hardware. Its receiver processes channels within the sampled bandwidth and can produce decoded records and a dashboard. For studying your own mesh, it connects familiar waterfall and receiver concepts with packet behavior. The README explains hardware bandwidth limits and distinguishes valid decoded records from RF diagnostic observations.","canonicalUrl":"https://github.com/alphafox02/meshtastic-sniffer","topics":["sdr-discovery","mesh-radio"],"tags":["Meshtastic","SDR","LoRa","HackRF","signal analysis","receive-only"],"kind":"Project","maturity":"Experimental","level":"Intermediate","sources":[{"label":"meshtastic-sniffer README","url":"https://github.com/alphafox02/meshtastic-sniffer","type":"Developer","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."}],"body":[],"caveats":["This is developer documentation; the library has not compiled or tested the software with hardware.","An SDR's available bandwidth limits simultaneous channel coverage.","Interpreting encrypted payloads requires the appropriate key; use captures and keys you are authorized to inspect.","A single receiver does not become a direction finder merely by showing signal strength."],"reactions":[],"media":{"src":"/hot-topics-media/hackrf-hackathon.jpg","alt":"Raspberry Pi, HackRF One and antenna at a hackathon (illustrative photograph).","credit":"Michaelgraaf / Wikimedia Commons","license":"CC0 1.0","licenseUrl":"https://creativecommons.org/publicdomain/zero/1.0/","sourceUrl":"https://commons.wikimedia.org/wiki/File:HackRF_One_etc.jpg"},"attachments":[{"label":"Project source and build instructions","url":"https://github.com/alphafox02/meshtastic-sniffer","hosted":false,"license":"Original source; no mirrored copy"},{"label":"Radcom signal observation worksheet (TXT)","url":"/hot-topics-downloads/signal-observation.txt","hosted":true,"license":"Radcom original · CC BY 4.0"}],"checkedAt":"2026-10-27T00:18:03.810Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T00:44:49.540Z","updatedAt":"2026-10-27T00:44:49.540Z"}},{"resourceId":"meshtastic-sdr-reception-project","revision":2,"reason":"Worksheet reuse notice clarified (v2); factual source checks unchanged.","createdAt":"2026-10-27T02:11:54.879Z","record":{"id":"meshtastic-sdr-reception-project","title":"Study your mesh signals with an SDR receiver","summary":"The meshtastic-sniffer project documents passive reception of Meshtastic LoRa traffic using supported SDR hardware. Its receiver processes channels within the sampled bandwidth and can produce decoded records and a dashboard. For studying your own mesh, it connects familiar waterfall and receiver concepts with packet behavior. The README explains hardware bandwidth limits and distinguishes valid decoded records from RF diagnostic observations.","canonicalUrl":"https://github.com/alphafox02/meshtastic-sniffer","topics":["sdr-discovery","mesh-radio"],"tags":["Meshtastic","SDR","LoRa","HackRF","signal analysis","receive-only"],"kind":"Project","maturity":"Experimental","level":"Intermediate","sources":[{"label":"meshtastic-sniffer README","url":"https://github.com/alphafox02/meshtastic-sniffer","type":"Developer","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."}],"body":[],"caveats":["This is developer documentation; the library has not compiled or tested the software with hardware.","An SDR's available bandwidth limits simultaneous channel coverage.","Interpreting encrypted payloads requires the appropriate key; use captures and keys you are authorized to inspect.","A single receiver does not become a direction finder merely by showing signal strength."],"reactions":[],"media":{"src":"/hot-topics-media/hackrf-hackathon.jpg","alt":"Raspberry Pi, HackRF One and antenna at a hackathon (illustrative photograph).","credit":"Michaelgraaf / Wikimedia Commons","license":"CC0 1.0","licenseUrl":"https://creativecommons.org/publicdomain/zero/1.0/","sourceUrl":"https://commons.wikimedia.org/wiki/File:HackRF_One_etc.jpg"},"attachments":[{"label":"Project source and build instructions","url":"https://github.com/alphafox02/meshtastic-sniffer","hosted":false,"license":"Original source; no mirrored copy"},{"label":"Radcom signal observation worksheet (TXT, v2)","url":"/hot-topics-downloads/signal-observation.txt","hosted":true,"license":"Radcom original · CC BY 4.0"}],"checkedAt":"2026-10-27T00:18:03.810Z","sourcePublishedAt":null,"status":"published","revision":2,"createdAt":"2026-10-27T00:44:49.540Z","updatedAt":"2026-10-27T02:11:54.879Z"}},{"resourceId":"mobile-whip-receive-build","revision":1,"reason":"Initial collection: primary-source research checked October 26, 2026.","createdAt":"2026-10-27T00:44:46.604Z","record":{"id":"mobile-whip-receive-build","title":"Mobile-Whip: an experimental receive-only antenna build","summary":"Mobile-Whip is an open hardware adaptation of the Mini-Whip concept intended for low-voltage or battery-powered reception. The repository includes design and simulation files, while its issue tracker is essential reading before a build. The author lists noise and possible oscillation concerns and notes the absence of suitable protection against accidental transmit power. Treat this as an experiment for builders who want to inspect and improve a design.","canonicalUrl":"https://github.com/skuep/Mobile-Whip","topics":["antennas-diy","sdr-discovery","portable-field"],"tags":["Mobile-Whip","receive only","HF","SDR","KiCad","battery"],"kind":"Project","maturity":"Experimental","level":"Advanced","sources":[{"label":"Mobile-Whip repository","url":"https://github.com/skuep/Mobile-Whip","type":"Developer","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."},{"label":"Mobile-Whip known issues","url":"https://github.com/skuep/Mobile-Whip/issues/2","type":"Developer","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."}],"body":[],"caveats":["Receive only. Do not connect it where transmit power can reach the antenna output.","The author reports higher noise and possible self-oscillation; these are unresolved design cautions, not a turnkey product endorsement."],"reactions":[],"media":null,"attachments":[{"label":"Radcom field-session checklist (TXT)","url":"/hot-topics-downloads/field-checklist.txt","hosted":true,"license":"Radcom original · CC BY 4.0"}],"checkedAt":"2026-10-27T00:18:03.810Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T00:44:46.604Z","updatedAt":"2026-10-27T00:44:46.604Z"}},{"resourceId":"mobile-whip-receive-build","revision":2,"reason":"Worksheet reuse notice clarified (v2); factual source checks unchanged.","createdAt":"2026-10-27T02:12:52.759Z","record":{"id":"mobile-whip-receive-build","title":"Mobile-Whip: an experimental receive-only antenna build","summary":"Mobile-Whip is an open hardware adaptation of the Mini-Whip concept intended for low-voltage or battery-powered reception. The repository includes design and simulation files, while its issue tracker is essential reading before a build. The author lists noise and possible oscillation concerns and notes the absence of suitable protection against accidental transmit power. Treat this as an experiment for builders who want to inspect and improve a design.","canonicalUrl":"https://github.com/skuep/Mobile-Whip","topics":["antennas-diy","sdr-discovery","portable-field"],"tags":["Mobile-Whip","receive only","HF","SDR","KiCad","battery"],"kind":"Project","maturity":"Experimental","level":"Advanced","sources":[{"label":"Mobile-Whip repository","url":"https://github.com/skuep/Mobile-Whip","type":"Developer","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."},{"label":"Mobile-Whip known issues","url":"https://github.com/skuep/Mobile-Whip/issues/2","type":"Developer","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."}],"body":[],"caveats":["Receive only. Do not connect it where transmit power can reach the antenna output.","The author reports higher noise and possible self-oscillation; these are unresolved design cautions, not a turnkey product endorsement."],"reactions":[],"media":null,"attachments":[{"label":"Radcom field-session checklist (TXT, v2)","url":"/hot-topics-downloads/field-checklist.txt","hosted":true,"license":"Radcom original · CC BY 4.0"}],"checkedAt":"2026-10-27T00:18:03.810Z","sourcePublishedAt":null,"status":"published","revision":2,"createdAt":"2026-10-27T00:44:46.604Z","updatedAt":"2026-10-27T02:12:52.759Z"}},{"resourceId":"morserino-echo-keyer-practice","revision":1,"reason":"User-requested broader learning collection: DMR, CW practice and satellite reception, with current sources and operating caveats.","createdAt":"2026-10-27T02:50:11.435Z","record":{"id":"morserino-echo-keyer-practice","title":"Morserino and M32 Pocket: hear it, send it back, check it","summary":"Morserino combines a Morse trainer, keyer and decoder. The developer describes Koch lessons, generated groups and words, and an echo exercise in which you send back what you hear. The current site also distinguishes the M32 Pocket from earlier hardware. That makes it a useful device to investigate when you want practice that involves both recognition and sending, rather than listening to recordings alone.","canonicalUrl":"https://www.morserino.info/","topics":["cw-morse","portable-field"],"tags":["CW","Morse","Morserino","M32 Pocket","keyer","trainer","Products"],"kind":"Guide","maturity":"Reference","level":"Beginner","sources":[{"label":"Morserino developer: trainer and keyer features","url":"https://www.morserino.info/","type":"Developer","checkedAt":"2026-10-27T02:36:31.000Z","note":"M32 Pocket and earlier models, Koch/echo training, keyer modes and model-specific features."}],"body":[{"heading":"Match the exercise to the problem","text":"Use character lessons for recognition and echo practice to connect sound with paddle timing. The developer lists adjustable spacing, feedback and several keyer modes. Select a small exercise you can repeat consistently, then change one setting at a time so improvement is not confused with an easier configuration."},{"heading":"Check the exact model","text":"Pocket-specific controls and games do not imply the same hardware in an older Morserino. The site describes Wi-Fi communication across the family and LoRa on earlier editions. Verify your unit and firmware against the manual before choosing accessories, configuring connections or expecting a particular practice feature."}],"caveats":["Developer feature descriptions are not an independent hardware test.","A launch date was not established; this is a current product reference, not a dated new-release announcement."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:36:31.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:50:11.435Z","updatedAt":"2026-10-27T02:50:11.435Z"}},{"resourceId":"morserino-echo-keyer-practice","revision":2,"reason":"Add official model-specific audio-connection caveat and Accessibility Edition context; preserve existing practice sections and original source check date after homepage fetch timeout.","createdAt":"2026-10-30T12:01:00.370Z","record":{"id":"morserino-echo-keyer-practice","title":"Morserino and M32 Pocket: hear it, send it back, check it","summary":"Morserino combines a Morse trainer, keyer and decoder. The developer describes Koch lessons, generated groups and words, and an echo exercise in which you send back what you hear. The current site also distinguishes the M32 Pocket from earlier hardware. That makes it a useful device to investigate when you want practice that involves both recognition and sending, rather than listening to recordings alone.","canonicalUrl":"https://www.morserino.info/","topics":["cw-morse","portable-field"],"tags":["CW","Morse","Morserino","M32 Pocket","keyer","trainer","Products"],"kind":"Guide","maturity":"Reference","level":"Beginner","sources":[{"label":"Morserino developer: trainer and keyer features","url":"https://www.morserino.info/","type":"Developer","checkedAt":"2026-10-27T02:36:31.000Z","note":"M32 Pocket and earlier models, Koch/echo training, keyer modes and model-specific features."},{"label":"Morserino developer — M32 Pocket FAQ","url":"https://github.com/oe1wkl/Morserino-32/blob/master/Documentation/FAQ/Morserino-32%20Pocket%20FAQ.md","type":"Developer","checkedAt":"2026-10-30T12:00:13.000Z","note":"Model-specific audio-connection warning and spoken-menu Accessibility Edition; FAQ describes 9.x and may include beta documentation. No release date inferred."}],"body":[{"heading":"Match the exercise to the problem","text":"Use character lessons for recognition and echo practice to connect sound with paddle timing. The developer lists adjustable spacing, feedback and several keyer modes. Select a small exercise you can repeat consistently, then change one setting at a time so improvement is not confused with an easier configuration."},{"heading":"Check the exact model","text":"Pocket-specific controls and games do not imply the same hardware in an older Morserino. The site describes Wi-Fi communication across the family and LoRa on earlier editions. Verify your unit and firmware against the manual before choosing accessories, configuring connections or expecting a particular practice feature."},{"heading":"Check audio wiring and accessibility options","text":"The developer FAQ warns that the Pocket's audio socket differs from earlier Morserinos: do not reuse an older audio lead or connect a receiver with an ordinary audio cable. Follow the Pocket-specific splitter instructions before making that connection. It also documents a Pocket-only Accessibility Edition with spoken menus; its feature set differs from the standard edition."}],"caveats":["Developer feature descriptions are not an independent hardware test.","A launch date was not established; this is a current product reference, not a dated new-release announcement.","Match the manual to the hardware, firmware and edition. The FAQ's rolling manual links can include beta releases."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-30T12:00:13.000Z","sourcePublishedAt":null,"status":"published","revision":2,"createdAt":"2026-10-27T02:50:11.435Z","updatedAt":"2026-10-30T12:01:00.370Z"}},{"resourceId":"nanovna-calibration","revision":1,"reason":"Initial collection: primary-source research checked October 26, 2026.","createdAt":"2026-10-27T00:44:47.195Z","record":{"id":"nanovna-calibration","title":"Make antenna measurements you can repeat","summary":"NanoVNA's documentation explains the calibration workflow behind useful antenna and network measurements. Its guide covers open, short, load, isolation, and through standards, with saving and loading calibration data. It also describes how a changed frequency range affects calibration information. Read this before comparing antenna adjustments so that a changed measurement setup does not masquerade as an improved antenna.","canonicalUrl":"https://nanovna.com/?page_id=2","topics":["antennas-diy","portable-field"],"tags":["NanoVNA","VNA","SWR","calibration","antenna analyzer"],"kind":"Guide","maturity":"Reference","level":"Intermediate","sources":[{"label":"NanoVNA calibration guide","url":"https://nanovna.com/?page_id=2","type":"Developer","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."},{"label":"NanoVNA project overview","url":"https://nanovna.com/","type":"Developer","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."}],"body":[],"caveats":["NanoVNA variants have different hardware and performance limits; use the instructions for your device.","This is a documentation reference, not a claim that any specific analyzer or antenna was measured here.","Keep transmitters disconnected from an analyzer during measurement."],"reactions":[],"media":{"src":"/hot-topics-media/nanovna.jpg","alt":"NanoVNA showing a Smith chart (illustrative equipment photograph).","credit":"Elgull / Wikimedia Commons","license":"CC BY-SA 4.0","licenseUrl":"https://creativecommons.org/licenses/by-sa/4.0/","sourceUrl":"https://commons.wikimedia.org/wiki/File:NanoVNA.jpg"},"attachments":[{"label":"Radcom field-session checklist (TXT)","url":"/hot-topics-downloads/field-checklist.txt","hosted":true,"license":"Radcom original · CC BY 4.0"}],"checkedAt":"2026-10-27T00:18:03.810Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T00:44:47.195Z","updatedAt":"2026-10-27T00:44:47.195Z"}},{"resourceId":"nanovna-calibration","revision":2,"reason":"Worksheet reuse notice clarified (v2); factual source checks unchanged.","createdAt":"2026-10-27T02:12:49.201Z","record":{"id":"nanovna-calibration","title":"Make antenna measurements you can repeat","summary":"NanoVNA's documentation explains the calibration workflow behind useful antenna and network measurements. Its guide covers open, short, load, isolation, and through standards, with saving and loading calibration data. It also describes how a changed frequency range affects calibration information. Read this before comparing antenna adjustments so that a changed measurement setup does not masquerade as an improved antenna.","canonicalUrl":"https://nanovna.com/?page_id=2","topics":["antennas-diy","portable-field"],"tags":["NanoVNA","VNA","SWR","calibration","antenna analyzer"],"kind":"Guide","maturity":"Reference","level":"Intermediate","sources":[{"label":"NanoVNA calibration guide","url":"https://nanovna.com/?page_id=2","type":"Developer","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."},{"label":"NanoVNA project overview","url":"https://nanovna.com/","type":"Developer","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."}],"body":[],"caveats":["NanoVNA variants have different hardware and performance limits; use the instructions for your device.","This is a documentation reference, not a claim that any specific analyzer or antenna was measured here.","Keep transmitters disconnected from an analyzer during measurement."],"reactions":[],"media":{"src":"/hot-topics-media/nanovna.jpg","alt":"NanoVNA showing a Smith chart (illustrative equipment photograph).","credit":"Elgull / Wikimedia Commons","license":"CC BY-SA 4.0","licenseUrl":"https://creativecommons.org/licenses/by-sa/4.0/","sourceUrl":"https://commons.wikimedia.org/wiki/File:NanoVNA.jpg"},"attachments":[{"label":"Radcom field-session checklist (TXT, v2)","url":"/hot-topics-downloads/field-checklist.txt","hosted":true,"license":"Radcom original · CC BY 4.0"}],"checkedAt":"2026-10-27T00:18:03.810Z","sourcePublishedAt":null,"status":"published","revision":2,"createdAt":"2026-10-27T00:44:47.195Z","updatedAt":"2026-10-27T02:12:49.201Z"}},{"resourceId":"nvent-color-smart-ground-rod-system","revision":1,"reason":"User-requested expansion: source-checked radio products and station-building references, with launch and preview status distinguished.","createdAt":"2026-10-27T02:48:53.917Z","record":{"id":"nvent-color-smart-ground-rod-system","title":"nVent Color Smart: a dated ground-rod system announcement","summary":"nVent announced its Color Smart Ground Rod System on September 30, 2026. The manufacturer uses color identification across copper-bonded rods, connectors and accessories to help installers select compatible parts. That makes this a useful station-building news item about component selection. It does not establish that a color-coded rod improves soil conductivity, replaces bonding design or makes a radio station immune to lightning.","canonicalUrl":"https://www.nvent.com/en-us/resources/news/nvent-introduces-color-smart-ground-rod-system-reduce-product-selection-time-and-installation-errors","topics":["antennas-diy"],"tags":["nVent","ground rods","grounding","lightning","product announcement"],"kind":"News","maturity":"Reference","level":"Intermediate","sources":[{"label":"nVent launch announcement","url":"https://www.nvent.com/en-us/resources/news/nvent-introduces-color-smart-ground-rod-system-reduce-product-selection-time-and-installation-errors","type":"Manufacturer","checkedAt":"2026-10-27T02:46:06.000Z","note":"Dated September 30, 2026; product identification system."},{"label":"ARRL grounding reference","url":"https://www.arrl.org/grounding","type":"Official documentation","checkedAt":"2026-10-27T02:46:06.000Z","note":"Distinguishes safety, lightning and RF grounding."}],"body":[{"heading":"What changed","text":"The announcement covers a coordinated grounding product family, including Hammerlock and Lay-In Hammerlock connections. Its stated benefit is reducing selection time and installation mistakes. When reviewing a specification or installer proposal, match the complete component family and documented application, rather than treating rod diameter or color as a universal compatibility rule."},{"heading":"Put the rod in context","text":"ARRL separates electrical safety grounding, lightning protection and control of unwanted RF currents. These purposes overlap but have different requirements. A station assessment should consider the building grounding system, bonding, cable entry and local conditions together. Have a qualified electrician or lightning-protection professional evaluate the site and applicable requirements."}],"caveats":["Manufacturer claims are attributed; no independent installation or lightning testing is reported here."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:46:06.000Z","sourcePublishedAt":"2026-09-30T00:00:00.000Z","status":"published","revision":1,"createdAt":"2026-10-27T02:48:53.917Z","updatedAt":"2026-10-27T02:48:53.917Z"}},{"resourceId":"osmand-offline-map-prep","revision":1,"reason":"Initial collection: primary-source research checked October 26, 2026.","createdAt":"2026-10-27T00:44:50.157Z","record":{"id":"osmand-offline-map-prep","title":"Prepare offline maps before your next field outing","summary":"OsmAnd's guide explains how to select and download regional maps for offline use. It recommends starting with vector maps, which support the app's navigation, search and map interactions without relying on a live connection for map data. For a portable radio outing, preparing the relevant region beforehand makes the map a useful companion to your station plan and field notes.","canonicalUrl":"https://www.osmand.net/docs/user/start-with/download-maps/","topics":["maps-tracking","portable-field"],"tags":["OsmAnd","offline maps","navigation","field planning"],"kind":"Guide","maturity":"Reference","level":"Beginner","sources":[{"label":"OsmAnd download-maps guide","url":"https://www.osmand.net/docs/user/start-with/download-maps/","type":"Official documentation","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."}],"body":[],"caveats":["Mapping software alone does not measure a radio bearing or locate a transmitter.","Download the needed regions before losing connectivity."],"reactions":[],"media":null,"attachments":[{"label":"Radcom field-session checklist (TXT)","url":"/hot-topics-downloads/field-checklist.txt","hosted":true,"license":"Radcom original · CC BY 4.0"}],"checkedAt":"2026-10-27T00:18:03.810Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T00:44:50.157Z","updatedAt":"2026-10-27T00:44:50.157Z"}},{"resourceId":"osmand-offline-map-prep","revision":2,"reason":"Worksheet reuse notice clarified (v2); factual source checks unchanged.","createdAt":"2026-10-27T02:11:23.952Z","record":{"id":"osmand-offline-map-prep","title":"Prepare offline maps before your next field outing","summary":"OsmAnd's guide explains how to select and download regional maps for offline use. It recommends starting with vector maps, which support the app's navigation, search and map interactions without relying on a live connection for map data. For a portable radio outing, preparing the relevant region beforehand makes the map a useful companion to your station plan and field notes.","canonicalUrl":"https://www.osmand.net/docs/user/start-with/download-maps/","topics":["maps-tracking","portable-field"],"tags":["OsmAnd","offline maps","navigation","field planning"],"kind":"Guide","maturity":"Reference","level":"Beginner","sources":[{"label":"OsmAnd download-maps guide","url":"https://www.osmand.net/docs/user/start-with/download-maps/","type":"Official documentation","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."}],"body":[],"caveats":["Mapping software alone does not measure a radio bearing or locate a transmitter.","Download the needed regions before losing connectivity."],"reactions":[],"media":null,"attachments":[{"label":"Radcom field-session checklist (TXT, v2)","url":"/hot-topics-downloads/field-checklist.txt","hosted":true,"license":"Radcom original · CC BY 4.0"}],"checkedAt":"2026-10-27T00:18:03.810Z","sourcePublishedAt":null,"status":"published","revision":2,"createdAt":"2026-10-27T00:44:50.157Z","updatedAt":"2026-10-27T02:11:23.952Z"}},{"resourceId":"osmand-offline-search-55-preview","revision":1,"reason":"Source-checked original addition for mesh/mapping and portable preparation; explicitly dated guide or development preview, no new hosted media or copied source material.","createdAt":"2026-10-29T12:04:11.408Z","record":{"id":"osmand-offline-search-55-preview","title":"OsmAnd previews rebuilt offline search for version 5.5","summary":"OsmAnd's October 26, 2026 developer article describes a rebuilt offline search engine planned for version 5.5 and already offered in nightly builds. Announced changes include more flexible address entry, typo handling and broader category matching. For a field outing, the practical question is whether your downloaded maps and installed build can find the locations you actually need.","canonicalUrl":"https://osmand.net/blog/offline-search-video/","topics":["maps-tracking","portable-field"],"tags":["OsmAnd","offline maps","search","5.5","nightly","field planning"],"kind":"News","maturity":"Experimental","level":"Beginner","sources":[{"label":"OsmAnd — Why Offline Search Is So Hard","url":"https://osmand.net/blog/offline-search-video/","type":"Developer","checkedAt":"2026-10-29T12:03:49.419Z","note":"October 26, 2026 announcement distinguishes planned 5.5 availability from nightly builds."}],"body":[{"heading":"Treat the announcement as a preview","text":"The article distinguishes nightly access from the planned general release. Check your installed version before expecting the new behaviour. Developer speed and accuracy figures are not independent measurements and are not reproduced here as guaranteed performance."},{"heading":"Rehearse the field search","text":"Before leaving connectivity, try the destination, nearby facilities and an alternative access point with the required maps downloaded. Inspect the selected location rather than accepting a familiar place name alone. This is suggested preparation, not a tested navigation result."}],"caveats":["Nightly software may contain defects. This entry does not confirm a general release of version 5.5.","No app build was installed or benchmarked; the article's publication date is not a release date."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-29T12:03:49.419Z","sourcePublishedAt":"2026-10-26T00:00:00.000Z","status":"published","revision":1,"createdAt":"2026-10-29T12:04:11.408Z","updatedAt":"2026-10-29T12:04:11.408Z"}},{"resourceId":"osmand-trip-recording-field-notes","revision":1,"reason":"User-requested original radio-history and listening coverage, with attributed historical evidence, jurisdiction-specific legal sources and no copied recordings.","createdAt":"2026-10-27T02:51:07.774Z","record":{"id":"osmand-trip-recording-field-notes","title":"OsmAnd trip recording for field reports","summary":"OsmAnd's Trip Recording plugin saves a route that can later be displayed, reviewed and shared. For a field-radio outing, a track can provide context for written observations about stops and terrain. It complements a radio log without measuring radio coverage itself. Enable the plugin and check its settings before the outing, then verify a short saved recording on the device you intend to use in the field.","canonicalUrl":"https://osmand.net/docs/user/plugins/trip-recording/","topics":["maps-tracking","portable-field"],"tags":["OsmAnd","GPX","trip recording","field notes","offline planning"],"kind":"Guide","maturity":"Reference","level":"Beginner","sources":[{"label":"OsmAnd Trip Recording documentation","url":"https://osmand.net/docs/user/plugins/trip-recording/","type":"Developer","checkedAt":"2026-10-27T02:36:30.000Z","note":"Explains setup, recording intervals, saving tracks and platform limitations."}],"body":[{"heading":"Balance detail and battery use","text":"Shorter recording intervals provide more route detail but use more battery. Check location permissions and test with the screen locked: OsmAnd notes that background behavior differs across platforms. Choose settings for the outing rather than assuming the most frequent recording is best."},{"heading":"Review before sharing","text":"Save the track and inspect it for gaps. Our recommendation is to remove sensitive start or end points before sharing. Keep radio observations in your notes: a route line alone cannot establish where messages were delivered or where an antenna performed better."}],"caveats":["Android and iOS controls differ. No phone or background-recording test was performed here.","This is an established feature reference; no new-release date was established."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:36:30.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:51:07.774Z","updatedAt":"2026-10-27T02:51:07.774Z"}},{"resourceId":"pirate-radio-culture-and-boundaries","revision":1,"reason":"User-requested original radio-history and listening coverage, with attributed historical evidence, jurisdiction-specific legal sources and no copied recordings.","createdAt":"2026-10-27T02:51:11.617Z","record":{"id":"pirate-radio-culture-and-boundaries","title":"Pirate radio: unusual programmes, elusive signals, real legal boundaries","summary":"Pirate-radio listening combines radio discovery with unconventional broadcasting: music themes, comedy, drama and stations that appear only occasionally. HFUnderground's community guide describes this shortwave listening culture and the receiver choices behind it. Treat a station name or forum report as a listening clue, not proof of its identity, location or licensing status. Amateur radio and broadcasting are different activities; a ham licence does not turn a music broadcast into an authorised amateur transmission.","canonicalUrl":"https://www.hfunderground.com/wiki/index.php/Pirate_Radio_New_Listener_Guide_and_FAQ","topics":["sdr-discovery","hf-digital"],"tags":["pirate radio","shortwave","listening","broadcasting","history"],"kind":"Guide","maturity":"Reference","level":"Beginner","sources":[{"label":"HFUnderground community listening guide","url":"https://www.hfunderground.com/wiki/index.php/Pirate_Radio_New_Listener_Guide_and_FAQ","type":"Operator report","checkedAt":"2026-10-27T02:40:22.472Z","note":"Community-authored descriptions of programme styles, receiver options and listening practice; not a regulator or current on-air confirmation."},{"label":"eCFR — 47 CFR 97.113","url":"https://www.ecfr.gov/current/title-47/chapter-I/subchapter-D/part-97/subpart-B/section-97.113","type":"Official documentation","checkedAt":"2026-10-27T02:40:22.472Z","note":"U.S. amateur-service restrictions on broadcasting, music and retransmission; read with the rule's exceptions."},{"label":"FCC dataset catalogue","url":"https://catalog.data.gov/dataset/pirate-radio-broadcasting-database","type":"Official documentation","checkedAt":"2026-10-27T02:40:22.472Z","note":"Scope of the FCC enforcement-action database; not a current station-status feed."}],"body":[{"heading":"Start with the programme and the evidence","text":"Listen for a spoken identification and note the UTC date, time, receive frequency and mode. Separate what you personally heard from another listener's report. A replay can repeat an old station name, and a distant internet receiver hears a different propagation path from the radio on your desk."},{"heading":"Understand the boundary","text":"For U.S. amateurs, section 97.113 restricts broadcasting, music transmissions and retransmission, with specific exceptions. The FCC's pirate-radio database records enforcement actions; it is not a live directory of every unauthorised station. This library covers history and reception, not instructions to operate an unlicensed broadcast transmitter."}],"caveats":["Historical frequency lists and old reports are not proof that a station is on air now.","Reception, recording and disclosure rules depend on jurisdiction and the type of communication. This is not individual legal advice."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:40:22.472Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:51:11.617Z","updatedAt":"2026-10-27T02:51:11.617Z"}},{"resourceId":"polyphaser-coax-surge-protector-selection","revision":1,"reason":"User-requested expansion including magnetic loops, Buckmaster OCF, G5RV history and digital voice; original sourced prose, no copied media.","createdAt":"2026-10-27T02:49:35.812Z","record":{"id":"polyphaser-coax-surge-protector-selection","title":"Coax surge protectors: select for the station and the grounding system","summary":"PolyPhaser’s technical paper explains why a coaxial surge protector is only one part of a station protection system. It discusses center-conductor and shield behavior, grounding and different protector architectures. Read this as a manufacturer’s established technical reference, not a new-product announcement or a promise that equipment will survive every strike. Product selection must account for the radio path and the site together.","canonicalUrl":"https://www.polyphaser.com/News/DownloadFile?downloadGuid=52f23510-c294-40d8-889b-b63f1c6fdcb5","topics":["antennas-diy","remote-control"],"tags":["PolyPhaser","surge protection","lightning","grounding","coax"],"kind":"Guide","maturity":"Reference","level":"Intermediate","sources":[{"label":"PolyPhaser coax protection white paper","url":"https://www.polyphaser.com/News/DownloadFile?downloadGuid=52f23510-c294-40d8-889b-b63f1c6fdcb5","type":"Manufacturer","checkedAt":"2026-10-27T02:46:06.000Z","note":"Manufacturer paper; copyright 2017; no exact publication date."},{"label":"ARRL grounding reference","url":"https://www.arrl.org/grounding","type":"Official documentation","checkedAt":"2026-10-27T02:46:06.000Z","note":"Separate grounding purposes; no installation prescription."}],"body":[{"heading":"Check what must pass through","text":"Write down the frequency range, transmitter power, connector arrangement and whether the feed line also carries DC to an antenna accessory. DC-blocking and DC-passing designs are not interchangeable in every installation. Compare the exact model’s documentation and test conditions; a large surge-current headline alone does not explain equipment protection."},{"heading":"Review the complete entry system","text":"The paper emphasizes that a protector needs an appropriate grounding arrangement to function as intended. ARRL also distinguishes lightning protection from RF and electrical safety grounding. Have a qualified professional assess bonding, cable entry and the site’s applicable requirements. Adding an isolated rod or inline device is not a complete design."}],"caveats":["The paper is historical technical material; obtain current model specifications and site-specific advice."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:46:06.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:49:35.812Z","updatedAt":"2026-10-27T02:49:35.812Z"}},{"resourceId":"pota-activation-guide","revision":1,"reason":"Initial collection: primary-source research checked October 26, 2026.","createdAt":"2026-10-27T00:44:48.481Z","record":{"id":"pota-activation-guide","title":"Take your station to a park: the POTA activator guide","summary":"The official POTA activator guide follows a trip from preparation through operating, packing up, and submitting logs. It brings together the practical details that make a portable station work: equipment checks, batteries, accurate clocks, operating aids, and consideration for park visitors. Use it as a starting point for your own field checklist, then follow the current program rules and the requirements of the park you plan to visit.","canonicalUrl":"https://docs.pota.app/docs/activator_reference/activator_guide-english.html","topics":["portable-field","antennas-diy"],"tags":["POTA","portable","field power","logging","antennas"],"kind":"Guide","maturity":"Reference","level":"Beginner","sources":[{"label":"Parks on the Air Activator Guide","url":"https://docs.pota.app/docs/activator_reference/activator_guide-english.html","type":"Official documentation","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."}],"body":[],"caveats":["POTA says its guide is not a complete checklist or procedure.","Its park maps indicate general proximity and should not be used as navigation maps.","Check current access and park-specific permission; tree attachments and stakes can be restricted."],"reactions":[],"media":{"src":"/hot-topics-media/icom705.jpg","alt":"ICOM IC-705 (illustrative equipment photograph).","credit":"Batchman99 / Wikimedia Commons","license":"CC BY-SA 4.0","licenseUrl":"https://creativecommons.org/licenses/by-sa/4.0/","sourceUrl":"https://commons.wikimedia.org/wiki/File:ICOM_IC-705.jpg"},"attachments":[{"label":"Radcom field-session checklist (TXT)","url":"/hot-topics-downloads/field-checklist.txt","hosted":true,"license":"Radcom original · CC BY 4.0"}],"checkedAt":"2026-10-27T00:18:03.810Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T00:44:48.481Z","updatedAt":"2026-10-27T00:44:48.481Z"}},{"resourceId":"pota-activation-guide","revision":2,"reason":"Worksheet reuse notice clarified (v2); factual source checks unchanged.","createdAt":"2026-10-27T02:12:33.471Z","record":{"id":"pota-activation-guide","title":"Take your station to a park: the POTA activator guide","summary":"The official POTA activator guide follows a trip from preparation through operating, packing up, and submitting logs. It brings together the practical details that make a portable station work: equipment checks, batteries, accurate clocks, operating aids, and consideration for park visitors. Use it as a starting point for your own field checklist, then follow the current program rules and the requirements of the park you plan to visit.","canonicalUrl":"https://docs.pota.app/docs/activator_reference/activator_guide-english.html","topics":["portable-field","antennas-diy"],"tags":["POTA","portable","field power","logging","antennas"],"kind":"Guide","maturity":"Reference","level":"Beginner","sources":[{"label":"Parks on the Air Activator Guide","url":"https://docs.pota.app/docs/activator_reference/activator_guide-english.html","type":"Official documentation","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."}],"body":[],"caveats":["POTA says its guide is not a complete checklist or procedure.","Its park maps indicate general proximity and should not be used as navigation maps.","Check current access and park-specific permission; tree attachments and stakes can be restricted."],"reactions":[],"media":{"src":"/hot-topics-media/icom705.jpg","alt":"ICOM IC-705 (illustrative equipment photograph).","credit":"Batchman99 / Wikimedia Commons","license":"CC BY-SA 4.0","licenseUrl":"https://creativecommons.org/licenses/by-sa/4.0/","sourceUrl":"https://commons.wikimedia.org/wiki/File:ICOM_IC-705.jpg"},"attachments":[{"label":"Radcom field-session checklist (TXT, v2)","url":"/hot-topics-downloads/field-checklist.txt","hosted":true,"license":"Radcom original · CC BY 4.0"}],"checkedAt":"2026-10-27T00:18:03.810Z","sourcePublishedAt":null,"status":"published","revision":2,"createdAt":"2026-10-27T00:44:48.481Z","updatedAt":"2026-10-27T02:12:33.471Z"}},{"resourceId":"pota-club-activation","revision":1,"reason":"Initial collection: primary-source research checked October 26, 2026.","createdAt":"2026-10-27T00:44:48.268Z","record":{"id":"pota-club-activation","title":"Plan a club activation without tangled logs","summary":"POTA's club guide explains how a shared callsign changes planning, spotting, and logging. It recommends coordinating operators and station footprints, and describes how the station callsign and individual operator are represented in the log. That makes it useful for clubs bringing experienced operators and newcomers together around one portable setup. Keep the official guide alongside your own operating plan so program-specific details stay easy to find.","canonicalUrl":"https://docs.pota.app/docs/activator_reference/activator_guide_clubs.html","topics":["portable-field","hf-digital"],"tags":["POTA","club","Field Day skills","ADIF","logging"],"kind":"Guide","maturity":"Reference","level":"Intermediate","sources":[{"label":"Parks on the Air Club Activation Guide","url":"https://docs.pota.app/docs/activator_reference/activator_guide_clubs.html","type":"Official documentation","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."}],"body":[],"caveats":["A club activation and several individual activations are different arrangements; do not mix their logging procedures.","The source was last modified October 4, 2026; follow it for current program details.","A shared location does not remove the need to coordinate interference between stations."],"reactions":[],"media":{"src":"/hot-topics-media/icom705.jpg","alt":"ICOM IC-705 (illustrative equipment photograph).","credit":"Batchman99 / Wikimedia Commons","license":"CC BY-SA 4.0","licenseUrl":"https://creativecommons.org/licenses/by-sa/4.0/","sourceUrl":"https://commons.wikimedia.org/wiki/File:ICOM_IC-705.jpg"},"attachments":[{"label":"Radcom field-session checklist (TXT)","url":"/hot-topics-downloads/field-checklist.txt","hosted":true,"license":"Radcom original · CC BY 4.0"}],"checkedAt":"2026-10-27T00:18:03.810Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T00:44:48.268Z","updatedAt":"2026-10-27T00:44:48.268Z"}},{"resourceId":"pota-club-activation","revision":2,"reason":"Worksheet reuse notice clarified (v2); factual source checks unchanged.","createdAt":"2026-10-27T02:12:38.232Z","record":{"id":"pota-club-activation","title":"Plan a club activation without tangled logs","summary":"POTA's club guide explains how a shared callsign changes planning, spotting, and logging. It recommends coordinating operators and station footprints, and describes how the station callsign and individual operator are represented in the log. That makes it useful for clubs bringing experienced operators and newcomers together around one portable setup. Keep the official guide alongside your own operating plan so program-specific details stay easy to find.","canonicalUrl":"https://docs.pota.app/docs/activator_reference/activator_guide_clubs.html","topics":["portable-field","hf-digital"],"tags":["POTA","club","Field Day skills","ADIF","logging"],"kind":"Guide","maturity":"Reference","level":"Intermediate","sources":[{"label":"Parks on the Air Club Activation Guide","url":"https://docs.pota.app/docs/activator_reference/activator_guide_clubs.html","type":"Official documentation","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."}],"body":[],"caveats":["A club activation and several individual activations are different arrangements; do not mix their logging procedures.","The source was last modified October 4, 2026; follow it for current program details.","A shared location does not remove the need to coordinate interference between stations."],"reactions":[],"media":{"src":"/hot-topics-media/icom705.jpg","alt":"ICOM IC-705 (illustrative equipment photograph).","credit":"Batchman99 / Wikimedia Commons","license":"CC BY-SA 4.0","licenseUrl":"https://creativecommons.org/licenses/by-sa/4.0/","sourceUrl":"https://commons.wikimedia.org/wiki/File:ICOM_IC-705.jpg"},"attachments":[{"label":"Radcom field-session checklist (TXT, v2)","url":"/hot-topics-downloads/field-checklist.txt","hosted":true,"license":"Radcom original · CC BY 4.0"}],"checkedAt":"2026-10-27T00:18:03.810Z","sourcePublishedAt":null,"status":"published","revision":2,"createdAt":"2026-10-27T00:44:48.268Z","updatedAt":"2026-10-27T02:12:38.232Z"}},{"resourceId":"radio-caroline-offshore-history","revision":1,"reason":"User-requested original radio-history and listening coverage, with attributed historical evidence, jurisdiction-specific legal sources and no copied recordings.","createdAt":"2026-10-27T02:51:21.004Z","record":{"id":"radio-caroline-offshore-history","title":"Radio Caroline: from offshore broadcasting to a licensed station","summary":"Radio Caroline's own historical account traces a station launched from a ship in 1964, its interruptions and returns, and the later preservation of Ross Revenge. Its story links music culture, marine engineering and broadcasting law. The present organisation describes itself as a licensed UK broadcaster. That distinction matters: an offshore-pirate heritage should not be used to label its current service an illegal operation.","canonicalUrl":"https://www.radiocaroline.co.uk/pdf/Caroline_Publicity_6pp_2022.pdf","topics":["sdr-discovery","hf-digital"],"tags":["pirate radio","Radio Caroline","offshore radio","history","medium wave"],"kind":"Guide","maturity":"Historical","level":"Beginner","sources":[{"label":"Radio Caroline — historical publicity booklet","url":"https://www.radiocaroline.co.uk/pdf/Caroline_Publicity_6pp_2022.pdf","type":"Official documentation","checkedAt":"2026-10-27T02:40:22.472Z","note":"The station's own history, including 1964 origins, later vessels and modern services; promotional claims remain attributed."},{"label":"Radio Caroline — The History of 648","url":"https://www.radiocaroline.co.uk/history_of_648.html","type":"Official documentation","checkedAt":"2026-10-27T02:40:22.472Z","note":"Station-published historical account of the frequency and transmission sites."},{"label":"Radio Caroline official website","url":"https://www.radiocaroline.co.uk/","type":"Official documentation","checkedAt":"2026-10-27T02:40:22.472Z","note":"Current official site identifies Radio Caroline as the former offshore pirate, now a licensed UK broadcaster."}],"body":[{"heading":"Read the story in stages","text":"The station's account describes the 1960s ships, the 1972 return, the loss of Mi Amigo in 1980, the Ross Revenge era beginning in 1983 and the later recovery of that ship. This is a participant's history; its political judgments and audience claims need independent corroboration before being treated as settled facts."},{"heading":"A frequency has a history too","text":"Caroline's separate history of 648 kHz follows earlier BBC uses and the development of the Orford Ness transmission site. It makes a useful companion to the ship story: studio location, transmitter location and programme identity need not be the same. Follow the station's own current listening information for today's services."}],"caveats":["The linked publicity document is a historical source, not a current price, coverage or programme schedule.","This entry links to the originals; it does not reproduce the station's recordings, artwork or photographs."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:40:22.472Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:51:21.004Z","updatedAt":"2026-10-27T02:51:21.004Z"}},{"resourceId":"radio-caroline-offshore-history","revision":2,"reason":"Document the 2017 UK licence award, subsequent start of 648 kHz service and station reception-report practice.","createdAt":"2026-11-07T13:06:28.100Z","record":{"id":"radio-caroline-offshore-history","title":"Radio Caroline: from offshore broadcasting to a licensed station","summary":"Radio Caroline began broadcasting from a ship in 1964. Its surviving vessel, Ross Revenge, is part of that offshore history. The UK community radio licence awarded in 2017 opens a later chapter in the story, when listeners could tune to 648 kHz for a signal from the Suffolk coast.","canonicalUrl":"https://www.radiocaroline.co.uk/pdf/Caroline_Publicity_6pp_2022.pdf","topics":["sdr-discovery","hf-digital"],"tags":["pirate radio","Radio Caroline","offshore radio","history","medium wave"],"kind":"Guide","maturity":"Historical","level":"Beginner","sources":[{"label":"Radio Caroline — historical publicity booklet","url":"https://www.radiocaroline.co.uk/pdf/Caroline_Publicity_6pp_2022.pdf","type":"Official documentation","checkedAt":"2026-11-07T13:06:00.000Z","note":"The station's own history, including 1964 origins, later vessels and modern services; promotional claims remain attributed."},{"label":"Radio Caroline — The History of 648","url":"https://www.radiocaroline.co.uk/history_of_648.html","type":"Official documentation","checkedAt":"2026-11-07T13:06:00.000Z","note":"Station-published historical account of the frequency and transmission sites."},{"label":"Radio Caroline official website","url":"https://www.radiocaroline.co.uk/","type":"Official documentation","checkedAt":"2026-11-07T13:06:00.000Z","note":"Official station homepage with listening options and links to station material."},{"label":"Ofcom — May 2017 AM community radio licence awards","url":"https://www.ofcom.org.uk/siteassets/resources/documents/manage-your-licence/community-radio/awards/five-am-community-radio-licence-awards-may-2017.pdf?v=322490","type":"Official documentation","checkedAt":"2026-11-07T13:06:00.000Z","note":"UK regulator identifies the original licensee and service area in its May 2017 award."},{"label":"Radio Caroline on 648 AM","url":"https://www.radiocaroline.co.uk/648_am.html","type":"Official documentation","checkedAt":"2026-11-07T13:06:00.000Z","note":"Station account dates the return to medium wave and explains how its engineering team uses reception reports."}],"body":[{"heading":"Read the story in stages","text":"The station's account describes the 1960s ships, the 1972 return, the loss of Mi Amigo in 1980, the Ross Revenge era beginning in 1983 and the later recovery of that ship. This is a participant's history; its political judgments and audience claims need independent corroboration before being treated as settled facts."},{"heading":"A frequency has a history too","text":"Caroline's separate history of 648 kHz follows earlier BBC uses and the development of the Orford Ness transmission site. It makes a useful companion to the ship story: studio location, transmitter location and programme identity need not be the same. Follow the station's own current listening information for today's services."},{"heading":"When did licensed AM broadcasting begin?","text":"In May 2017, Ofcom awarded Radio Caroline AM Broadcasting Ltd a community radio licence for Suffolk and northern Essex. The station dates its return to medium wave to the end of that year, using the land-based transmitter at Orford Ness. Its 648 AM page invites listeners to report what they heard, where they heard it and which receiver they used. The engineering volunteers read the reports and may be unable to answer each one."}],"caveats":["The linked publicity document is a historical source, not a current price, coverage or programme schedule.","This entry links to the originals; it does not reproduce the station's recordings, artwork or photographs."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-11-07T13:06:00.000Z","sourcePublishedAt":null,"status":"published","revision":2,"createdAt":"2026-10-27T02:51:21.004Z","updatedAt":"2026-11-07T13:06:28.100Z"}},{"resourceId":"radio-orienteering-first-hunt","revision":1,"reason":"User-requested ten-shelf expansion: mesh hardware, mapping, field networks and satellite learning; source-checked original guidance.","createdAt":"2026-10-27T02:50:56.177Z","record":{"id":"radio-orienteering-first-hunt","title":"Radio orienteering: turn bearings into a cooperative field activity","summary":"Radio orienteering combines receiving, direction finding and map reading to locate purposefully placed transmitters. ARRL describes the organized sport, while Open ARDF offers a progression for teaching beginners. It is an approachable way for a club to connect antenna knowledge with outdoor skills. Start with a controlled exercise and known transmitters; the useful outcome is learning to interpret bearings, not guessing a location from a signal-strength number alone.","canonicalUrl":"https://openardf.org/teaching-ardf/teaching-ardf-101/","topics":["maps-tracking","portable-field","antennas-diy"],"tags":["radio orienteering","ARDF","fox hunting","bearings","club activity","Morse identifiers"],"kind":"Guide","maturity":"Reference","level":"Beginner","sources":[{"label":"Open ARDF Teaching ARDF 101","url":"https://openardf.org/teaching-ardf/teaching-ardf-101/","type":"Official documentation","checkedAt":"2026-10-27T02:36:30.000Z","note":"Instructor-authored sequence, equipment and beginner-course considerations."},{"label":"ARRL Radio Orienteering","url":"https://www.arrl.org/amateur-radio-direction-finding","type":"Official documentation","checkedAt":"2026-10-27T02:36:30.000Z","note":"Explains the organized sport and points to participation resources."}],"body":[{"heading":"Make the first course easy to understand","text":"Open ARDF recommends matching receivers to the transmitters, a manageable practice area and skills taught in sequence. Its beginner lessons avoid the extra complexity of timed transmitter cycles. Our suggested club session begins with a visible demonstration, then a short hidden-transmitter exercise, followed by comparing what each participant heard and plotted."},{"heading":"Prepare people as well as equipment","text":"Assign responsibility for the authorized transmitters and confirm permission to use the site. Explain course boundaries and the return plan before separating the group. A map holder and compass make it easier to keep a bearing while moving. Progress to more complex hunts only after participants can operate their receivers confidently."}],"caveats":["The guide concerns an agreed exercise with placed transmitters; it does not authorize entering private property or tracking people.","No course, receiver or antenna was tested here; event details must be checked with the organizer."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:36:30.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:50:56.177Z","updatedAt":"2026-10-27T02:50:56.177Z"}},{"resourceId":"remote-hf-station-planning","revision":1,"reason":"Initial collection: primary-source research checked October 26, 2026.","createdAt":"2026-10-27T00:44:50.786Z","record":{"id":"remote-hf-station-planning","title":"A remote station needs a recovery plan","summary":"Michael Walker's introductory remote-HF guide looks beyond the radio connection to station power, modem recovery, a nearby computer and supporting hardware. Its planning questions remain useful: how will you restart equipment, diagnose a failure and recover access when you cannot visit the station? Read it as a collection of design considerations, then verify present-day equipment and requirements separately.","canonicalUrl":"https://www.flexradio.com/documentation/a-beginners-guide-to-remote-hf-station-components/","topics":["remote-control","antennas-diy","hf-digital"],"tags":["remote HF","station control","power","recovery","FlexRadio","planning"],"kind":"Guide","maturity":"Reference","level":"Beginner","sources":[{"label":"FlexRadio guide page","url":"https://www.flexradio.com/documentation/a-beginners-guide-to-remote-hf-station-components/","type":"Manufacturer","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."},{"label":"Remote HF Station Setup, May 2022","url":"https://edge.flexradio.com/www/offload/20221111132151/A-Beginners-Guide-to-Remote-HF-Station-Setup.pdf","type":"Manufacturer","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."}],"body":[],"caveats":["The document is dated May 2022; product names, prices and availability may have changed.","The author describes ideas rather than a warranted, fully tested system.","Do not repeat older claims about particular Internet technologies as universal current limitations."],"reactions":[],"media":null,"attachments":[{"label":"Remote HF station planning guide (PDF)","url":"https://edge.flexradio.com/www/offload/20221111132151/A-Beginners-Guide-to-Remote-HF-Station-Setup.pdf","hosted":false,"license":"Original source; no mirrored copy"}],"checkedAt":"2026-10-27T00:18:03.810Z","sourcePublishedAt":"2022-05-01T12:00:00.000Z","status":"published","revision":1,"createdAt":"2026-10-27T00:44:50.786Z","updatedAt":"2026-10-27T00:44:50.786Z"}},{"resourceId":"reticulum-sideband-start","revision":1,"reason":"User-requested ten-shelf expansion: mesh hardware, mapping, field networks and satellite learning; source-checked original guidance.","createdAt":"2026-10-27T02:50:45.392Z","record":{"id":"reticulum-sideband-start","title":"Reticulum and Sideband: build a messaging network around available links","summary":"Reticulum is a networking stack; Sideband is an application that uses it. The developer documents links carried over technologies including LoRa, packet radio and Wi-Fi, while Sideband provides messaging, telemetry and map features. This offers another route for people exploring communications beyond a single commercial service. Begin by understanding the application, network and hardware layers separately instead of assuming every device described as mesh belongs to the same network.","canonicalUrl":"https://reticulum.network/manual/gettingstartedfast.html","topics":["mesh-radio","remote-control","maps-tracking"],"tags":["Reticulum","Sideband","LXMF","off-grid","messaging","networking"],"kind":"Guide","maturity":"Reference","level":"Intermediate","sources":[{"label":"Reticulum Getting Started Fast","url":"https://reticulum.network/manual/gettingstartedfast.html","type":"Developer","checkedAt":"2026-10-27T02:36:30.000Z","note":"Describes platform-specific setup and available interfaces."},{"label":"Sideband developer repository and distribution notice","url":"https://github.com/markqvist/Sideband","type":"Developer","checkedAt":"2026-10-27T02:36:30.000Z","note":"Documents messaging, maps, telemetry and current distribution arrangements."}],"body":[{"heading":"Start with a small experiment","text":"Our recommended first exercise is two devices on a link you control, exchanging a short message and checking the result at both ends. Follow the platform-specific installation guide. Only then add another interface or relay. Record which path actually carried the message so an internet-assisted success is not mistaken for a radio-only result."},{"heading":"Keep capabilities and permission distinct","text":"Sideband's developer lists offline maps, authenticated telemetry queries and remote commands. Configure only features your group needs and protect its identities and credentials. The repository also says source development has moved to Reticulum-based distribution, while packages continue through documented channels; consult the current installation information rather than relying on an old checkout."}],"caveats":["Developer descriptions are not an independent security audit or a guarantee of delivery.","Check applicable radio rules before carrying encrypted traffic over a particular band; software capability does not supply transmission authorization."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:36:30.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:50:45.392Z","updatedAt":"2026-10-27T02:50:45.392Z"}},{"resourceId":"rez-scout-xform-modular-transformer","revision":1,"reason":"User-requested expansion: source-checked radio products and station-building references, with launch and preview status distinguished.","createdAt":"2026-10-27T02:49:00.852Z","record":{"id":"rez-scout-xform-modular-transformer","title":"REZ Scout XFORM: a modular 4:1 antenna accessory","summary":"REZ Antenna’s Scout XFORM adds a modular transformer option to its Scout antenna system. The manufacturer presents the 4:1 module for configurations such as Rybakov antennas and loops, with direct attachment to Scout XF and a jumper arrangement for older Scout bases. This is an accessory reference, useful for understanding which parts form a complete antenna before ordering or packing a field kit.","canonicalUrl":"https://www.rezantenna.com/xform","topics":["antennas-diy","portable-field"],"tags":["REZ Antenna","Scout","transformer","Rybakov","modular antennas"],"kind":"Guide","maturity":"Reference","level":"Intermediate","sources":[{"label":"Scout XFORM manufacturer reference","url":"https://www.rezantenna.com/xform","type":"Manufacturer","checkedAt":"2026-10-27T02:46:06.000Z","note":"Current module, compatibility and development status."}],"body":[{"heading":"Plan a complete configuration","text":"Write down the intended antenna configuration first, then check the base, transformer, radiator, return path and feed line against the manufacturer’s instructions. A transformer changes the impedance presented to the radio system; it does not supply the missing wire, support or matching range needed by every possible arrangement."},{"heading":"Separate available and planned parts","text":"The current page identifies additional 5:1 and 9:1 modules as being developed. Treat those as future options. It also gives different SSB and digital duty-cycle ratings, and conditions weather resistance on proper assembly. Verify the exact configuration and operating mode instead of applying the largest power figure universally."}],"caveats":["No dated launch was verified. Planned modules are not represented as available."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:46:06.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:49:00.852Z","updatedAt":"2026-10-27T02:49:00.852Z"}},{"resourceId":"rigexpert-match-upgradeable-analyzer","revision":1,"reason":"User-requested expansion: source-checked radio products and station-building references, with launch and preview status distinguished.","createdAt":"2026-10-27T02:48:57.569Z","record":{"id":"rigexpert-match-upgradeable-analyzer","title":"RigExpert MATCH: choose analyzer features by license","summary":"RigExpert MATCH is an antenna and cable analyzer whose measurement range and features depend on its license. The current manufacturer page specifies a base range of 0.1–75 MHz, with upgrades to 230 or 500 MHz. Its October 2025 announcement positioned MATCH as the successor to AA-55 ZOOM. This reference helps distinguish frequency coverage from the additional measurement tools included in each package.","canonicalUrl":"https://rigexpert.com/antenna-analyzers/upgaradeable-antenna-analyzer-match/","topics":["antennas-diy","portable-field"],"tags":["RigExpert","MATCH","antenna analyzer","test equipment","VNA"],"kind":"Guide","maturity":"Reference","level":"Intermediate","sources":[{"label":"MATCH product and license specifications","url":"https://rigexpert.com/antenna-analyzers/upgaradeable-antenna-analyzer-match/","type":"Manufacturer","checkedAt":"2026-10-27T02:46:06.000Z","note":"Current page lists 75 MHz base coverage."},{"label":"AA-55 ZOOM transition announcement","url":"https://rigexpert.com/news/a-new-chapter-begins-match-takes-the-torch-from-aa-55-zoom/","type":"Manufacturer","checkedAt":"2026-10-27T02:46:06.000Z","note":"Dated October 17, 2025; not a 2026 launch."}],"body":[{"heading":"Match the license to the job","text":"Start with the measurement you need: checking an HF antenna, comparing cable loss, measuring electrical length or locating a cable fault. RigExpert places cable tools and user calibration in upgraded licenses, with time-domain reflectometry in RFE. Compare the current license table before assuming every advertised feature is included in the base unit."},{"heading":"Make measurements repeatable","text":"Record the analyzer firmware, licensed functions, adapters and measurement location alongside a saved trace. Moving from the antenna feedpoint to the shack changes what is being measured. AntScope support offers a way to retain results; consistent setup makes those records more useful than comparing isolated minimum-SWR numbers from different configurations."}],"caveats":["Published specifications and feature bundles can change; confirm the current license before purchase."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:46:06.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:48:57.569Z","updatedAt":"2026-10-27T02:48:57.569Z"}},{"resourceId":"rigexpert-wilkinson-divider-measurement-report","revision":1,"reason":"Add a dated manufacturer-authored divider/combiner measurement reference with explicit employment attribution, sample-specific limits and no claimed Radcom testing; no duplicate subject or canonical URL found in all 75 public records.","createdAt":"2026-10-31T12:06:07.902Z","record":{"id":"rigexpert-wilkinson-divider-measurement-report","title":"Antenna dividers and combiners: look beyond the frequency label","summary":"In a September 25, 2026 report, RigExpert's Oleksandr Antonov describes measuring a low-cost Wilkinson divider for satellite reception. The useful lesson is to compare insertion loss, port isolation and matching at the intended frequency. This is a manufacturer-authored bench account, not independent Radcom testing or a recommendation to buy that board.","canonicalUrl":"https://rigexpert.com/news/a-few-dollar-wilkinson-divider-what-can-it-really-do/","topics":["antennas-diy","sdr-discovery","space-radio"],"tags":["Wilkinson","divider","combiner","RigExpert","VNA","receive chain","feed lines"],"kind":"Guide","maturity":"Reference","level":"Intermediate","sources":[{"label":"RigExpert — Wilkinson divider measurement report","url":"https://rigexpert.com/news/a-few-dollar-wilkinson-divider-what-can-it-really-do/","type":"Manufacturer","checkedAt":"2026-10-31T12:05:46.000Z","note":"Dated September 25, 2026; named RigExpert employee reports one board's measurements and limitations."}],"body":[{"heading":"Separate splitting from excess loss","text":"The report distinguishes the nominal 3 dB division into two equal paths from additional losses in the board. It reports increasing excess loss toward the upper end of its advertised range. Those results concern the tested sample, not every Wilkinson divider."},{"heading":"Keep the measurement setup with the result","text":"The author describes terminating unused ports with suitable 50-ohm loads and checking calibration. Record those conditions when comparing measurements. A receiving experiment does not establish transmitter power handling; the report identifies uncertainty about the board's rating."}],"caveats":["No measurements or reception were performed by Radcom. The source author works for RigExpert, whose equipment appears in the report.","This is an established technical reference, not a new product launch. Original graphs, photos and data files are linked, not copied."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-31T12:05:46.000Z","sourcePublishedAt":"2026-09-25T00:00:00.000Z","status":"published","revision":1,"createdAt":"2026-10-31T12:06:07.902Z","updatedAt":"2026-10-31T12:06:07.902Z"}},{"resourceId":"rtl-sdr-blog-v4l-launch","revision":1,"reason":"User-requested source-checked library expansion; original factual summary with source dates and product-status caveats.","createdAt":"2026-10-27T02:48:29.809Z","record":{"id":"rtl-sdr-blog-v4l-launch","title":"RTL-SDR Blog V4L: the 2026 Lite successor needs the right driver","summary":"RTL-SDR Blog announced the V4L Lite on August 11, 2026 after the original V4’s tuner-chip supply ended. The manufacturer explains that V4L uses an R828S tuner and two-way input filtering rather than the V4’s three-way arrangement, while retaining the general V4 approach. This is a documented product release, but its launch-era stock and delivery statements should not be treated as today’s inventory.","canonicalUrl":"https://www.rtl-sdr.com/rtl-sdr-blog-v4l-lite-now-available-for-purchase/","topics":["sdr-discovery","hf-digital","antennas-diy"],"tags":["RTL-SDR","V4L","V4","USB receiver","drivers","product announcement"],"kind":"News","maturity":"Reference","level":"Intermediate","sources":[{"label":"RTL-SDR Blog V4L launch announcement","url":"https://www.rtl-sdr.com/rtl-sdr-blog-v4l-lite-now-available-for-purchase/","type":"Manufacturer","checkedAt":"2026-10-27T02:40:23.000Z","note":"Dated August 11, 2026 launch and tuner/filtering change."},{"label":"RTL-SDR Blog V4L user guide","url":"https://www.rtl-sdr.com/v4l/","type":"Manufacturer","checkedAt":"2026-10-27T02:40:23.000Z","note":"Required driver updates and application-specific setup."},{"label":"RTL-SDR Blog V4 end-of-line notice","url":"https://www.rtl-sdr.com/rtl-sdr-blog-v4-end-of-line/","type":"Manufacturer","checkedAt":"2026-10-27T02:40:23.000Z","note":"May 14, 2026 manufacturer supply and product-transition statement."}],"body":[{"heading":"The compatibility step that matters","text":"The V4L guide says updated drivers are necessary; an old installation can produce no useful reception even when the USB device is detected. Follow the instructions for your actual application and operating system rather than assuming an older V3 or V4 setup is sufficient."},{"heading":"Compare the tradeoff","text":"The change in front-end filtering is a design difference, not a universal better-or-worse verdict. Your local signal environment and antenna matter. Check current official documentation and authorized seller information, and keep the older V4’s end-of-line status distinct from V4L support."}],"caveats":["No price, current stock promise or independent sensitivity test is included.","The August announcement is dated historical evidence, not a live inventory feed."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:40:23.000Z","sourcePublishedAt":"2026-08-11T00:00:00.000Z","status":"published","revision":1,"createdAt":"2026-10-27T02:48:29.809Z","updatedAt":"2026-10-27T02:48:29.809Z"}},{"resourceId":"satnogs-observation-starter","revision":1,"reason":"User-requested broader learning collection: DMR, CW practice and satellite reception, with current sources and operating caveats.","createdAt":"2026-10-27T02:50:24.234Z","record":{"id":"satnogs-observation-starter","title":"SatNOGS: explore satellite telemetry before building a ground station","summary":"SatNOGS connects an open ground-station project, an observation network and a searchable satellite database. It offers a way to study received spacecraft signals and dated observation records before designing your own receiving station. The project’s public pages explain the relationship between equipment, scheduled observations and shared results. Begin with a specific satellite and a question about its data, rather than assuming every listed object is currently audible.","canonicalUrl":"https://satnogs.org/","topics":["space-radio","sdr-discovery","remote-control","antennas-diy"],"tags":["SatNOGS","telemetry","ground station","SDR","open source","satellite database"],"kind":"Guide","maturity":"Reference","level":"Beginner","sources":[{"label":"SatNOGS: project overview","url":"https://satnogs.org/","type":"Developer","checkedAt":"2026-10-27T02:36:31.000Z","note":"Open ground-station network, satellite database and station documentation."},{"label":"SatNOGS: network overview","url":"https://network.satnogs.org/","type":"Developer","checkedAt":"2026-10-27T02:36:31.000Z","note":"Remote observation management, public observation results and documentation links."},{"label":"SatNOGS: satellite database","url":"https://db.satnogs.org/","type":"Developer","checkedAt":"2026-10-27T02:36:31.000Z","note":"Searchable satellite records and dated received-data entries; not a guarantee of current activity."}],"body":[{"heading":"Follow a record through the system","text":"Look up a satellite, check the dates associated with available data and compare observations where available. Distinguish a database listing from a successful recent reception. This is useful preparation for deciding which receiving band, antenna and decoder a future station would actually need."},{"heading":"Build from current project documentation","text":"The network links to construction and integration documentation for owners adding stations. Review the current supported setup before purchasing parts. Public observations also create publication responsibilities: use the project’s stated reuse terms and avoid treating a technical database as blanket permission to intercept or redistribute unrelated communications."}],"caveats":["Older FAQ hardware, cost and station-count examples were not adopted as current specifications.","No observation was scheduled and no ground station was operated."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:36:31.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:50:24.234Z","updatedAt":"2026-10-27T02:50:24.234Z"}},{"resourceId":"sdrconnect-1010-release","revision":1,"reason":"User-requested source-checked library expansion; original factual summary with source dates and product-status caveats.","createdAt":"2026-10-27T02:48:36.723Z","record":{"id":"sdrconnect-1010-release","title":"SDRconnect 1.0.10: small-screen controls and scheduled recording","summary":"SDRplay’s release notes date SDRconnect 1.0.10 to August 14, 2026. Listed additions include a compact view for smaller touchscreens, more appearance themes, a recording scheduler with recurrence, and a revised remote-device editor. The notes also specify an nRSP-ST firmware minimum. This entry preserves what that particular release changed; it does not assume that the document will remain the newest software release.","canonicalUrl":"https://sdrplay.com/wp-content/uploads/2026/04/SDRconnect_Release_Notes.pdf","topics":["sdr-discovery","remote-control"],"tags":["SDRplay","SDRconnect","software release","scheduled recording","accessibility","touchscreen"],"kind":"News","maturity":"Reference","level":"Intermediate","sources":[{"label":"SDRplay SDRconnect release notes","url":"https://sdrplay.com/wp-content/uploads/2026/04/SDRconnect_Release_Notes.pdf","type":"Manufacturer","checkedAt":"2026-10-27T02:40:23.000Z","note":"Version 1.0.10 date, scheduler, compact view, themes, firmware minimum and headless-only features."},{"label":"SDRplay SDRconnect product page","url":"https://sdrplay.com/sdrconnect/","type":"Manufacturer","checkedAt":"2026-10-27T02:40:23.000Z","note":"Official software entry point and platform context."}],"body":[{"heading":"Match the update to a real need","text":"A compact view may suit a small display, while recurring recording can help with planned listening experiments. Try the workflow on a signal you are authorized to receive and record, and check storage space and time settings before depending on an unattended capture."},{"heading":"Keep the requirements attached","text":"The 1.0.10 notes require nRSP-ST firmware 1.0.15 or later. They also distinguish headless-only WebSocket access-control and secure-connection features. Do not assume every listed networking feature appears in the ordinary graphical interface or replaces a secure network design."}],"caveats":["Release date is August 14, 2026; check the current download before updating.","No installation, unattended recording or security configuration was tested."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:40:23.000Z","sourcePublishedAt":"2026-08-14T00:00:00.000Z","status":"published","revision":1,"createdAt":"2026-10-27T02:48:36.723Z","updatedAt":"2026-10-27T02:48:36.723Z"}},{"resourceId":"sdrplay-nrsp-st-network-receiver","revision":1,"reason":"User-requested source-checked library expansion; original factual summary with source dates and product-status caveats.","createdAt":"2026-10-27T02:48:32.791Z","record":{"id":"sdrplay-nrsp-st-network-receiver","title":"SDRplay nRSP-ST: put the receiver near the antenna","summary":"The nRSP-ST combines an SDR receiver and host computer in a networked unit. SDRplay lists continuous 1 kHz to 2 GHz reception through its SMA inputs, Ethernet and Wi-Fi connectivity, and operation with SDRconnect. The appeal is placement: the receiving hardware can sit closer to the antenna while the operator uses a networked device elsewhere. This is a current product reference, not a newly claimed launch.","canonicalUrl":"https://sdrplay.com/product/nrsp-st/","topics":["sdr-discovery","remote-control","hf-digital"],"tags":["SDRplay","nRSP-ST","network receiver","Ethernet","Wi-Fi","product spotlight"],"kind":"Guide","maturity":"Reference","level":"Intermediate","sources":[{"label":"SDRplay nRSP-ST product specifications","url":"https://sdrplay.com/product/nrsp-st/","type":"Manufacturer","checkedAt":"2026-10-27T02:40:23.000Z","note":"Receiver role, inputs, network interfaces and operating limits."},{"label":"SDRplay nRSP-ST datasheet","url":"https://sdrplay.com/wp-content/uploads/2026/06/nRSP-ST_Datasheet.pdf","type":"Manufacturer","checkedAt":"2026-10-27T02:40:23.000Z","note":"Integrated receiver/host design and spectrum capabilities."}],"body":[{"heading":"Plan the physical side first","text":"Choose a suitable location with power, networking and appropriate antenna protection. A shorter RF feed can be useful, but the receiver still needs an environment within its published limits. Moving the box does not automatically solve local electrical noise or make an outdoor installation weatherproof."},{"heading":"Use the supported access path","text":"SDRplay’s setup flow uses SDRconnect to discover and operate the receiver. Establish local operation before evaluating access from elsewhere. Compare input connectors and frequency limits, and keep software and device firmware requirements together when planning an update."}],"caveats":["The BNC input has a different upper frequency limit from the SMA inputs.","Remote usability, RF performance and network reliability were not tested here."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:40:23.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:48:32.791Z","updatedAt":"2026-10-27T02:48:32.791Z"}},{"resourceId":"sdrpp-receiver-guide","revision":1,"reason":"Initial collection: primary-source research checked October 26, 2026.","createdAt":"2026-10-27T00:44:49.740Z","record":{"id":"sdrpp-receiver-guide","title":"Explore the waterfall with SDR++","summary":"SDR++ is an open-source receiver application with a spectrum display, waterfall and support for multiple receiver sources. Its official manual covers tuning, gain, filters, squelch, recording and using more than one VFO within available receiver bandwidth. It is a practical reference for moving from hearing a signal to understanding how the receiver's display and controls shape what you can hear.","canonicalUrl":"https://www.sdrpp.org/","topics":["sdr-discovery","hf-digital","remote-control"],"tags":["SDR++","waterfall","receiver","manual","recording","VFO"],"kind":"Manual","maturity":"Reference","level":"Beginner","sources":[{"label":"SDR++ project","url":"https://www.sdrpp.org/","type":"Official documentation","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."},{"label":"SDR++ User Guide, December 2022","url":"https://www.sdrpp.org/manual.pdf","type":"Official documentation","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."}],"body":[],"caveats":["The linked manual is marked December 2022 and covers SDR++ up to version 1.1; newer builds can differ.","The project homepage offers nightly builds, which should not be described as a guaranteed stable release.","Actual band coverage depends on the connected receiver and antenna."],"reactions":[],"media":{"src":"/hot-topics-media/hackrf-hackathon.jpg","alt":"Raspberry Pi, HackRF One and antenna at a hackathon (illustrative photograph).","credit":"Michaelgraaf / Wikimedia Commons","license":"CC0 1.0","licenseUrl":"https://creativecommons.org/publicdomain/zero/1.0/","sourceUrl":"https://commons.wikimedia.org/wiki/File:HackRF_One_etc.jpg"},"attachments":[{"label":"Official SDR++ manual (PDF)","url":"https://www.sdrpp.org/manual.pdf","hosted":false,"license":"Original source; no mirrored copy"},{"label":"Radcom signal observation worksheet (TXT)","url":"/hot-topics-downloads/signal-observation.txt","hosted":true,"license":"Radcom original · CC BY 4.0"}],"checkedAt":"2026-10-27T00:18:03.810Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T00:44:49.740Z","updatedAt":"2026-10-27T00:44:49.740Z"}},{"resourceId":"sdrpp-receiver-guide","revision":2,"reason":"Worksheet reuse notice clarified (v2); factual source checks unchanged.","createdAt":"2026-10-27T02:11:51.905Z","record":{"id":"sdrpp-receiver-guide","title":"Explore the waterfall with SDR++","summary":"SDR++ is an open-source receiver application with a spectrum display, waterfall and support for multiple receiver sources. Its official manual covers tuning, gain, filters, squelch, recording and using more than one VFO within available receiver bandwidth. It is a practical reference for moving from hearing a signal to understanding how the receiver's display and controls shape what you can hear.","canonicalUrl":"https://www.sdrpp.org/","topics":["sdr-discovery","hf-digital","remote-control"],"tags":["SDR++","waterfall","receiver","manual","recording","VFO"],"kind":"Manual","maturity":"Reference","level":"Beginner","sources":[{"label":"SDR++ project","url":"https://www.sdrpp.org/","type":"Official documentation","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."},{"label":"SDR++ User Guide, December 2022","url":"https://www.sdrpp.org/manual.pdf","type":"Official documentation","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."}],"body":[],"caveats":["The linked manual is marked December 2022 and covers SDR++ up to version 1.1; newer builds can differ.","The project homepage offers nightly builds, which should not be described as a guaranteed stable release.","Actual band coverage depends on the connected receiver and antenna."],"reactions":[],"media":{"src":"/hot-topics-media/hackrf-hackathon.jpg","alt":"Raspberry Pi, HackRF One and antenna at a hackathon (illustrative photograph).","credit":"Michaelgraaf / Wikimedia Commons","license":"CC0 1.0","licenseUrl":"https://creativecommons.org/publicdomain/zero/1.0/","sourceUrl":"https://commons.wikimedia.org/wiki/File:HackRF_One_etc.jpg"},"attachments":[{"label":"Official SDR++ manual (PDF)","url":"https://www.sdrpp.org/manual.pdf","hosted":false,"license":"Original source; no mirrored copy"},{"label":"Radcom signal observation worksheet (TXT, v2)","url":"/hot-topics-downloads/signal-observation.txt","hosted":true,"license":"Radcom original · CC BY 4.0"}],"checkedAt":"2026-10-27T00:18:03.810Z","sourcePublishedAt":null,"status":"published","revision":2,"createdAt":"2026-10-27T00:44:49.740Z","updatedAt":"2026-10-27T02:11:51.905Z"}},{"resourceId":"sharkrf-cross-mode-reference","revision":1,"reason":"Initial collection: primary-source research checked October 26, 2026.","createdAt":"2026-10-27T00:44:49.326Z","record":{"id":"sharkrf-cross-mode-reference","title":"Which digital-voice networks can your hotspot connect?","summary":"SharkRF's cross-mode reference lists the supported radio-to-network combinations for openSPOT4 and openSPOT4 Pro. It explains the Pro model's hardware transcoding and D-STAR cross-mode support, alongside the software conversions available on the standard model. The compatibility table is useful when matching an existing DMR, D-STAR or C4FM radio to a network without assuming that every digital format converts to every other one.","canonicalUrl":"https://manuals.sharkrf.com/openspot4/en/cross-modes.html","topics":["digital-voice","remote-control"],"tags":["SharkRF","openSPOT4","DMR","D-STAR","C4FM","hotspot","cross-mode"],"kind":"Manual","maturity":"Reference","level":"Beginner","sources":[{"label":"SharkRF cross-mode manual","url":"https://manuals.sharkrf.com/openspot4/en/cross-modes.html","type":"Manufacturer","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."}],"body":[],"caveats":["Model differences matter; the standard openSPOT4 does not support every Pro conversion.","Manufacturer sound-quality claims are not independent listening-test results.","Network access, radio configuration and applicable registration remain separate setup tasks."],"reactions":[],"media":null,"attachments":[{"label":"Official openSPOT4 online manual","url":"https://manuals.sharkrf.com/openspot4/en/","hosted":false,"license":"Original source; no mirrored copy"}],"checkedAt":"2026-10-27T00:18:03.810Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T00:44:49.326Z","updatedAt":"2026-10-27T00:44:49.326Z"}},{"resourceId":"sharkrf-link-app-compatibility","revision":1,"reason":"User-requested source-checked library expansion; original factual summary with source dates and product-status caveats.","createdAt":"2026-10-27T02:48:23.660Z","record":{"id":"sharkrf-link-app-compatibility","title":"SharkRF Link: check which device can supply the voice connection","summary":"The SharkRF Link app provides a convenient route to the management interface of supported openSPOT devices. Its additional voice-transceiver function is specifically supported by openSPOT4 Pro. SharkRF says M1KE is not supported by the app because M1KE already provides its own transceiver and web interface. These distinctions matter when someone expects the same phone or computer workflow to work across every SharkRF model.","canonicalUrl":"https://www.sharkrf.com/products/sharkrf-link-app/","topics":["digital-voice","remote-control"],"tags":["SharkRF Link","openSPOT4 Pro","hotspot","computer audio","compatibility"],"kind":"Guide","maturity":"Reference","level":"Intermediate","sources":[{"label":"SharkRF Link application documentation","url":"https://www.sharkrf.com/products/sharkrf-link-app/","type":"Manufacturer","checkedAt":"2026-10-27T02:40:23.000Z","note":"Supported devices, Pro-only transceiver function, Apple caveats and discovery conditions."}],"body":[{"heading":"Management is not the same as voice","text":"Opening a supported device’s settings is one capability; sending and receiving call audio through the app is another. Identify your exact model before treating a successful connection to the interface as proof that the microphone and speaker workflow is supported."},{"heading":"Check the client as well","text":"The manufacturer lists beta status for some Apple builds and specific unsupported iPhone models. Local device discovery also depends on the network. Consult the current compatibility notes before relying on a particular phone, and keep management access protected."}],"caveats":["Apple beta support and device exclusions can change.","This is documentation-based guidance; no app, phone or remote connection was tested."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:40:23.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:48:23.660Z","updatedAt":"2026-10-27T02:48:23.660Z"}},{"resourceId":"sharkrf-m1ke-network-handheld","revision":1,"reason":"User-requested source-checked library expansion; original factual summary with source dates and product-status caveats.","createdAt":"2026-10-27T02:48:20.875Z","record":{"id":"sharkrf-m1ke-network-handheld","title":"SharkRF M1KE: digital voice without a separate handheld-and-hotspot pair","summary":"M1KE is SharkRF’s battery-powered WLAN/IP voice device with its own microphone and speaker. The manufacturer lists access to DMR, D-STAR, C4FM, NXDN and other compatible networks, alongside direct communication between M1KE devices. It should be understood as a network voice product, not a conventional VHF/UHF handheld that gains every listed radio mode over the air. Network access requirements remain separate.","canonicalUrl":"https://www.sharkrf.com/products/m1ke/","topics":["digital-voice","remote-control","portable-field"],"tags":["SharkRF","M1KE","DMR","D-STAR","C4FM","IP voice","product spotlight"],"kind":"Guide","maturity":"Reference","level":"Intermediate","sources":[{"label":"SharkRF M1KE product page","url":"https://www.sharkrf.com/products/m1ke/","type":"Manufacturer","checkedAt":"2026-10-27T02:40:23.000Z","note":"Device role, direct communication and supported network families."},{"label":"SharkRF M1KE stable firmware changelog","url":"https://www.sharkrf.com/products/m1ke/changelog/","type":"Manufacturer","checkedAt":"2026-10-27T02:40:23.000Z","note":"Current firmware feature and maintenance history; dates not supplied for each revision."}],"body":[{"heading":"Follow the actual signal path","text":"For an internet-linked conversation, the microphone audio travels through the selected network connection and service. That differs from a handheld talking by RF to a local repeater. Decide which kind of contact you want before choosing between a M1KE, a hotspot or an ordinary transceiver."},{"heading":"Keep firmware and network setup together","text":"The stable firmware history records additions and fixes for supported services. Read the current manual alongside the changelog when configuring a connector. A supported protocol name does not establish that a particular server will accept an unregistered user or every feature."}],"caveats":["This is a current product overview; no launch date or independent audio test is asserted.","Amateur-network registration and operating requirements still apply where relevant."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:40:23.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:48:20.875Z","updatedAt":"2026-10-27T02:48:20.875Z"}},{"resourceId":"sharkrf-openspot4-firmware-notes","revision":1,"reason":"Add original source-linked firmware-maintenance reference after checking both manufacturer histories. No dated launch claim, hosted assets, attachment changes or independent testing claim.","createdAt":"2026-10-28T12:06:05.176Z","record":{"id":"sharkrf-openspot4-firmware-notes","title":"openSPOT4 firmware: distinguish stable updates from beta history","summary":"SharkRF publishes separate stable and combined stable/beta firmware histories for openSPOT4. Both checked lists identify v93 as stable and describe a fix to the BrandMeister Manager key check. This is an undated maintenance reference, not a claim that v93 launched today. Use the notes to match a reported problem to a documented change before planning an update.","canonicalUrl":"https://www.sharkrf.com/products/openspot4/changelog/","topics":["digital-voice","remote-control"],"tags":["SharkRF","openSPOT4","openSPOT4 Pro","firmware","BrandMeister","DMR","stable","beta"],"kind":"Guide","maturity":"Reference","level":"Intermediate","sources":[{"label":"SharkRF openSPOT4 stable firmware changelog","url":"https://www.sharkrf.com/products/openspot4/changelog/","type":"Manufacturer","checkedAt":"2026-10-28T12:06:01.365Z","note":"Stable list shows v93 and the BrandMeister Manager key-check fix; no release date shown."},{"label":"SharkRF openSPOT4 stable and beta history","url":"https://www.sharkrf.com/products/openspot4/changelog/beta/","type":"Manufacturer","checkedAt":"2026-10-28T12:06:01.365Z","note":"Separately labels v93 stable and distinguishes earlier beta entries."}],"body":[{"heading":"Read the status beside the version","text":"The combined history includes both beta and stable entries. A higher version number alone does not establish its release status. Start with the exact device model and installed version, then follow the manufacturer's current update instructions."},{"heading":"Keep troubleshooting evidence specific","text":"Record the symptom, firmware version and affected network feature before changing software. Afterwards, repeat the same check. A documented fix is a developer claim about a particular issue; it does not establish that every connection problem has the same cause."}],"caveats":["No publication date was established for v93; sourcePublishedAt is intentionally unset.","No firmware was installed, radio operated or independent performance test conducted."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-28T12:06:01.365Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-28T12:06:05.176Z","updatedAt":"2026-10-28T12:06:05.176Z"}},{"resourceId":"shortwave-reception-log-and-qsl","revision":1,"reason":"User-requested original radio-history and listening coverage, with attributed historical evidence, jurisdiction-specific legal sources and no copied recordings.","createdAt":"2026-10-27T02:51:17.094Z","record":{"id":"shortwave-reception-log-and-qsl","title":"Turn a shortwave catch into a useful reception log","summary":"A good reception report explains what reached your receiver, when it happened and how well you could understand it. HFUnderground describes the QSL tradition: a station may acknowledge a listener's report with a card or message. The useful part comes before the reply—an orderly record of frequency, mode, UTC time, identification and programme clues. Apply the same discipline to licensed shortwave broadcasts and historical pirate-radio listening.","canonicalUrl":"https://www.hfunderground.com/wiki/index.php/QSL","topics":["sdr-discovery","hf-digital","portable-field"],"tags":["pirate radio","QSL","SINPO","shortwave","reception log"],"kind":"Guide","maturity":"Reference","level":"Beginner","sources":[{"label":"HFUnderground — QSL","url":"https://www.hfunderground.com/wiki/index.php/QSL","type":"Operator report","checkedAt":"2026-10-27T02:40:22.472Z","note":"Community explanation of reception reports, QSL practice, required report details and obsolete relay contact information."},{"label":"Ofcom — radio spectrum and the law","url":"https://www.ofcom.org.uk/spectrum/radio-equipment/radio-spectrum-and-the-law","type":"Official documentation","checkedAt":"2026-10-27T02:40:22.472Z","note":"UK-specific explanation of general reception, unauthorised interception and disclosure; not a statement of U.S. law."}],"body":[{"heading":"A repeatable listening exercise","text":"Write one line for each reception: UTC date and start/end time, frequency and units, mode, receiver, antenna, approximate listening region, and the words actually heard in an identification. Mark uncertain identifications as tentative. Record whether reception was local or through a remote receiver, so later comparisons use the correct location."},{"heading":"Report quality and protect context","text":"SIO describes signal strength, interference and overall quality; SINPO adds noise and propagation disturbance. Short plain-language notes can be more useful than an unexplained score. QSL replies are voluntary, and an old contact address may be obsolete. Check applicable reception and disclosure rules before sharing; this guide does not authorise publishing private communications."}],"caveats":["No reception was attempted for this entry. It is a suggested logging workflow, not a current station report.","Share only necessary contact information. Do not assume a QSL image or recorded programme is free to republish."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:40:22.472Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:51:17.094Z","updatedAt":"2026-10-27T02:51:17.094Z"}},{"resourceId":"skcc-slow-speed-cw","revision":1,"reason":"User-requested broader learning collection: DMR, CW practice and satellite reception, with current sources and operating caveats.","createdAt":"2026-10-27T02:50:14.812Z","record":{"id":"skcc-slow-speed-cw","title":"Take CW practice on air with the Slow Speed Saunter","summary":"SKCC’s Slow Speed Saunter gives mechanical-key operators a recurring setting for relaxed CW conversations. The club describes an informal activity rather than a contest, with a full UTC day each month for operating at a slower pace. It can provide a bridge from solo practice to exchanging callsigns, names and other information with real people, while following the club’s particular keying rules.","canonicalUrl":"https://www.skccgroup.com/operating_activities/slowspeed/","topics":["cw-morse","hf-digital","portable-field"],"tags":["CW","Morse","straight key","SKCC","Slow Speed Saunter","operating"],"kind":"Guide","maturity":"Reference","level":"Beginner","sources":[{"label":"SKCC: Slow Speed Saunter","url":"https://www.skccgroup.com/operating_activities/slowspeed/","type":"Official documentation","checkedAt":"2026-10-27T02:36:31.000Z","note":"Monthly informal slow-CW event, schedule and practice purpose."},{"label":"SKCC: key policy","url":"https://www.skccgroup.com/keypolicy.php","type":"Official documentation","checkedAt":"2026-10-27T02:36:31.000Z","note":"Mechanically generated Morse requirement for club activities and policy exceptions."}],"body":[{"heading":"Prepare for a conversation","text":"Read the event page and club guidance, listen before calling, and choose a speed you can copy. Keep a short note of your own exchange information nearby. Treat a difficult contact as feedback about what to practice next; the purpose is comfortable participation rather than a high contact total."},{"heading":"Check the clock and key policy","text":"The published schedule runs from 0000 to 2359 UTC on the first day of each month. SKCC preserves mechanically generated Morse and has its own key policy. A trainer’s electronic keyer can be useful for practice without automatically qualifying for a specific SKCC activity."}],"caveats":["Confirm the event page and applicable rules before participating; no live activity is promised."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:36:31.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:50:14.812Z","updatedAt":"2026-10-27T02:50:14.812Z"}},{"resourceId":"skcc-slow-speed-cw","revision":2,"reason":"November 4 source review: clarify existing Slow Speed Saunter record's explicit nonmember key allowance, preserving practice guidance, permanent ID and undated reference status. No media or uploads.","createdAt":"2026-11-04T12:58:20.459Z","record":{"id":"skcc-slow-speed-cw","title":"Take CW practice on air with the Slow Speed Saunter","summary":"SKCC’s Slow Speed Saunter offers a monthly setting for relaxed CW conversations, open to licensed amateurs. The event has different key requirements for members and nonmembers. It can help bridge solo practice and on-air exchanges while keeping the pace manageable.","canonicalUrl":"https://www.skccgroup.com/operating_activities/slowspeed/","topics":["cw-morse","hf-digital","portable-field"],"tags":["CW","Morse","straight key","SKCC","Slow Speed Saunter","operating"],"kind":"Guide","maturity":"Reference","level":"Beginner","sources":[{"label":"SKCC: Slow Speed Saunter","url":"https://www.skccgroup.com/operating_activities/slowspeed/","type":"Official documentation","checkedAt":"2026-11-04T12:58:19.000Z","note":"Schedule and beginner guidance; explicit distinction between member and nonmember key requirements."},{"label":"SKCC: key policy","url":"https://www.skccgroup.com/keypolicy.php","type":"Official documentation","checkedAt":"2026-11-04T12:58:19.000Z","note":"Mechanically generated Morse requirement for club activities and policy exceptions."}],"body":[{"heading":"Prepare for a conversation","text":"Read the event page and club guidance, listen before calling, and choose a speed you can copy. Keep a short note of your own exchange information nearby. Treat a difficult contact as feedback about what to practice next; the purpose is comfortable participation rather than a high contact total."},{"heading":"Check the clock and key policy","text":"The schedule runs from 0000 to 2359 UTC on the first day of each month, with 12 WPM or slower encouraged. Members use a straight key, side-swiper or bug under the club policy. The event explicitly allows nonmembers to use any available key, while encouraging mechanical keys. That event-specific allowance does not change the general member policy."}],"caveats":["Confirm the event page and applicable rules before participating; no live activity is promised."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-11-04T12:58:19.000Z","sourcePublishedAt":null,"status":"published","revision":2,"createdAt":"2026-10-27T02:50:14.812Z","updatedAt":"2026-11-04T12:58:20.459Z"}},{"resourceId":"times-lmr-400-uf-flexible-coax","revision":1,"reason":"User-requested expansion including magnetic loops, Buckmaster OCF, G5RV history and digital voice; original sourced prose, no copied media.","createdAt":"2026-10-27T02:49:30.624Z","record":{"id":"times-lmr-400-uf-flexible-coax","title":"LMR-400-UF: choose coax for both RF loss and movement","summary":"Times Microwave’s LMR-400-UF is a 50-ohm coaxial cable intended for applications needing greater flexibility than a rigid feed-line arrangement. The manufacturer describes a stranded center conductor and a flexible outer jacket, including use where repeated movement matters. This established product reference is useful when comparing a mast jumper, portable cable or equipment interconnect: frequency, length, routing and mechanical demands all belong in the decision.","canonicalUrl":"https://timesmicrowave.com/cables/lmr-400-uf-coax-cables/","topics":["antennas-diy","portable-field"],"tags":["Times Microwave","LMR-400-UF","coax","feed line","connectors"],"kind":"Guide","maturity":"Reference","level":"Intermediate","sources":[{"label":"LMR-400-UF manufacturer page","url":"https://timesmicrowave.com/cables/lmr-400-uf-coax-cables/","type":"Manufacturer","checkedAt":"2026-10-27T02:46:06.000Z","note":"Construction, application and specification resources."}],"body":[{"heading":"Compare the actual cable run","text":"Use the manufacturer’s attenuation data for the operating frequency and total cable length. A short flexible jumper and a long permanent feeder solve different problems. Include adapters and connectors in the plan, and compare the full assembly rather than assuming every cable with a similar diameter has identical loss."},{"heading":"Treat flexibility as a specification","text":"Check the stated bend radius, suitable connectors and environmental requirements before routing the cable. Flexibility does not remove the need for strain relief or careful handling at connector joints. Keep a record of the exact cable type so future repairs use compatible parts rather than a visually similar replacement."}],"caveats":["Established reference; no new launch claimed. Verify assembly ratings for the intended installation."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:46:06.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:49:30.624Z","updatedAt":"2026-10-27T02:49:30.624Z"}},{"resourceId":"uhf-satcom-pirates-and-status-evidence","revision":1,"reason":"User-requested original radio-history and listening coverage, with attributed historical evidence, jurisdiction-specific legal sources and no copied recordings.","createdAt":"2026-10-27T02:51:24.388Z","record":{"id":"uhf-satcom-pirates-and-status-evidence","title":"UHF SATCOM and satellite 'pirates': separate reception stories from spacecraft status","summary":"UHF satellite monitoring is a different subject from shortwave music broadcasting or an amateur-satellite contact. A 2015 report by operator PU2VLW describes receiving SSTV he attributed to FLTSATCOM-8. It is an individual historical report, not confirmation of a present signal. The Naval Postgraduate School's 2025 FLTSATCOM article supplies useful system history—and a reminder to read beyond a headline before declaring a satellite dead or active.","canonicalUrl":"https://nps.edu/-/the-last-telemetry-of-fltsatcom","topics":["space-radio","sdr-discovery"],"tags":["pirate radio","UHF SATCOM","FLTSATCOM","Bolinha","satellite history"],"kind":"Guide","maturity":"Historical","level":"Beginner","sources":[{"label":"Naval Postgraduate School — FLTSATCOM history","url":"https://nps.edu/-/the-last-telemetry-of-fltsatcom","type":"Official documentation","checkedAt":"2026-10-27T02:40:22.472Z","note":"September 11, 2025 account distinguishes a ground qualification model from orbiting satellites; no current status inferred."},{"label":"PU2VLW — historical SSTV reception report","url":"https://pu2vlw.wordpress.com/2015/04/04/recepcao-sstv-no-satelite-fltsatcom-8-bolinha/","type":"Operator report","checkedAt":"2026-10-27T02:40:22.472Z","note":"April 2015 firsthand reception account attributed to its author; identification and legal commentary are not independently established."},{"label":"Ofcom — reception and disclosure rules","url":"https://www.ofcom.org.uk/spectrum/radio-equipment/radio-spectrum-and-the-law","type":"Official documentation","checkedAt":"2026-10-27T02:40:22.472Z","note":"UK-specific reception/disclosure boundaries illustrate why receiver capability does not itself establish permission."}],"body":[{"heading":"The ground-model distinction","text":"NPS's 'Last Telemetry' story concerns a ground qualification model used for student education. Its final laboratory exercise does not establish that every spacecraft in orbit stopped operating. The article separately described the orbital system as it stood in September 2025. Neither statement supplies a live operational check for a listening session today."},{"heading":"Identify cautiously","text":"A voice, image or strong carrier alone does not establish which spacecraft relayed it, who originated it, or whether the transmission was authorised. Keep observations separate from conclusions and check dated primary records. Military satellite systems are not amateur repeaters. Any listening or sharing must comply with the applicable rules; use authorised amateur satellites for amateur contacts."}],"caveats":["No current activity, orbital status, receiving direction or spacecraft identification is asserted here.","The old operator report's speculation that military use had ended is not adopted. No intercepted images or audio are copied into this library."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:40:22.472Z","sourcePublishedAt":"2025-09-11T00:00:00.000Z","status":"published","revision":1,"createdAt":"2026-10-27T02:51:24.388Z","updatedAt":"2026-10-27T02:51:24.388Z"}},{"resourceId":"unne-1b-telemetry-and-commissioning","revision":1,"reason":"Add primary-source educational satellite reference; retain testing/Experimental status and distinguish launch, telemetry reception and repeater activation. No duplicated canonical record, copied media or claimed Radcom testing.","createdAt":"2026-11-01T12:59:19.687Z","record":{"id":"unne-1b-telemetry-and-commissioning","title":"UNNE-1B: follow telemetry while repeater testing continues","summary":"Nebrija University's UNNE-1B educational mission page reports an October 1, 2026 launch and reception of satellite data from October 4. AMSAT's list updated October 31 still places UNNE-1B, also called HADES-E2, in testing. Its telemetry and learning materials offer a receiving project; those milestones do not establish that the voice repeater is available for general use.","canonicalUrl":"https://www.nebrija.com/unne1b/en/index.html","topics":["space-radio","sdr-discovery"],"tags":["UNNE-1B","HADES-E2","AMSAT-EA","Nebrija","telemetry","FSK","commissioning"],"kind":"Guide","maturity":"Experimental","level":"Intermediate","sources":[{"label":"Nebrija University — UNNE-1B mission","url":"https://www.nebrija.com/unne1b/en/index.html","type":"Official documentation","checkedAt":"2026-11-01T12:58:57.000Z","note":"Mission participant's launch and reception account, telemetry overview and educational modules; page publication date not established."},{"label":"AMSAT — testing, upcoming and unknown satellites","url":"https://www.amsat.org/upcoming-satellites/","type":"Official documentation","checkedAt":"2026-11-01T12:58:57.000Z","note":"October 31, 2026 update lists UNNE-1B (HADES-E2) under In Testing."}],"body":[{"heading":"Separate reception from repeater readiness","text":"The university describes telemetry-only operation before the transponder is enabled by the operator. A received packet can therefore be useful evidence of satellite activity without showing that two-way voice contacts are available. Check a current operator notice before planning that activity."},{"heading":"Use the learning materials","text":"The mission site links explanations of signals, receiver setup and packet structure, including an educational game payload. Begin with those original resources and keep observation time, receiver settings and decoding results together. This library has not received or decoded the satellite."}],"caveats":["Experimental: commissioning status can change. Published frequencies and pass predictions do not guarantee reception or authorize transmission.","Launch and first-reception dates are event dates; sourcePublishedAt remains unset because the mission page's publication date was not established."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-11-01T12:58:57.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-11-01T12:59:19.687Z","updatedAt":"2026-11-01T12:59:19.687Z"}},{"resourceId":"w1aw-cw-practice-files","revision":1,"reason":"User-requested broader learning collection: DMR, CW practice and satellite reception, with current sources and operating caveats.","createdAt":"2026-10-27T02:50:07.967Z","record":{"id":"w1aw-cw-practice-files","title":"Practice copying CW with W1AW audio and matching text","summary":"ARRL’s W1AW practice library pairs Morse audio with the text used to generate it, allowing you to check what you copied after listening. The collection offers multiple speeds rather than one recording for everyone. Its lower-speed files use Farnsworth spacing: characters retain a quicker rhythm while extra gaps slow the overall exercise. This is useful practice material alongside a course, mentor or club contact.","canonicalUrl":"https://www.arrl.org/code-practice-files","topics":["cw-morse","hf-digital"],"tags":["CW","Morse","W1AW","copying","Farnsworth","practice"],"kind":"Guide","maturity":"Reference","level":"Beginner","sources":[{"label":"ARRL: W1AW code-practice files","url":"https://www.arrl.org/code-practice-files","type":"Official documentation","checkedAt":"2026-10-27T02:36:31.000Z","note":"Practice MP3s, matching text, speed choices and Farnsworth spacing; visible files are dated March 2026."}],"body":[{"heading":"Try a short copy-and-check session","text":"Choose a speed you can follow for a short passage. Write or type what you hear, then compare with the matching source text. Record the characters or word endings that caused trouble and revisit a manageable section. Increasing speed is less useful than finding which sounds you consistently confuse."},{"heading":"Keep the recording’s context","text":"Use ARRL’s links for listening or permitted personal downloads; the library does not mirror its audio or QST-derived text. Check each file’s date and speed. The page inspected displayed March 2026 practice material, so this entry does not describe those files as a newly released October lesson."}],"caveats":["This is a practice method, not a measured learning-speed claim."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:36:31.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:50:07.967Z","updatedAt":"2026-10-27T02:50:07.967Z"}},{"resourceId":"wio-tracker-l2-pro-device","revision":1,"reason":"User-requested ten-shelf expansion: mesh hardware, mapping, field networks and satellite learning; source-checked original guidance.","createdAt":"2026-10-27T02:50:38.947Z","record":{"id":"wio-tracker-l2-pro-device","title":"Wio Tracker L2 Pro: messages and offline maps without a phone","summary":"Seeed's Wio Tracker L2 Pro combines a 3.2-inch touchscreen, an ESP32-S3 processor, LoRa and satellite positioning in a standalone Meshtastic device. The Meshtastic hardware guide confirms support for messaging and map display without a phone, using a memory card for offline maps. It is a useful product to investigate when a group wants a self-contained field messenger instead of keeping every node tethered to a phone.","canonicalUrl":"https://meshtastic.org/docs/hardware/devices/seeed-studio/wio-series/tracker-l2-pro/","topics":["mesh-radio","maps-tracking","portable-field"],"tags":["Wio Tracker L2 Pro","Seeed","Meshtastic","touchscreen","offline maps","GNSS","Product guide"],"kind":"Guide","maturity":"Reference","level":"Beginner","sources":[{"label":"Meshtastic Wio Tracker L2 Pro hardware guide","url":"https://meshtastic.org/docs/hardware/devices/seeed-studio/wio-series/tracker-l2-pro/","type":"Official documentation","checkedAt":"2026-10-27T02:36:30.000Z","note":"Confirms processor, screen, GNSS and standalone messaging/offline maps."},{"label":"Seeed Wio Tracker L2 introduction","url":"https://wiki.seeedstudio.com/meshtastic_wio_tracker_l2_intro/","type":"Manufacturer","checkedAt":"2026-10-27T02:36:30.000Z","note":"Manufacturer hardware specification and map-storage description; update date is not a launch date."}],"body":[{"heading":"What changes in the field","text":"The screen brings messages and positioning onto the node itself. Seeed documents Wi-Fi, Bluetooth, a microSD slot and a 3000 mAh battery. Our suggested comparison is practical: decide whether on-device reading and navigation are worth carrying a larger screen-based unit, then compare the complete kit rather than just the processor."},{"heading":"Prepare before leaving coverage","text":"Load the map area beforehand and confirm that the map remains available without an internet connection. Check the exact firmware target, region and group settings in the official guides. A GNSS fix establishes the device's position; it does not prove that another node received a message or location update."}],"caveats":["The documentation was checked; no battery-life, radio-range or touchscreen testing was performed here.","A launch date was not established. This is a product guide, not a claim of a new October release."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:36:30.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:50:38.947Z","updatedAt":"2026-10-27T02:50:38.947Z"}},{"resourceId":"wireguard-radio-network-boundary","revision":1,"reason":"User-requested ten-shelf expansion: mesh hardware, mapping, field networks and satellite learning; source-checked original guidance.","createdAt":"2026-10-27T02:51:00.165Z","record":{"id":"wireguard-radio-network-boundary","title":"WireGuard for a remote station: define the network boundary first","summary":"WireGuard connects trusted peers through an encrypted IP tunnel using public and private keys. That can be useful when a remote operator needs a controlled route into a station network. It does not itself provide radio control, audio, station power recovery or operating authorization. Begin with a drawing of the specific devices and services you need to reach, then use the official overview and quick start to understand the tunnel configuration.","canonicalUrl":"https://www.wireguard.com/quickstart/","topics":["remote-control","antennas-diy"],"tags":["WireGuard","VPN","remote station","networking","keys","access control"],"kind":"Guide","maturity":"Reference","level":"Intermediate","sources":[{"label":"WireGuard Quick Start","url":"https://www.wireguard.com/quickstart/","type":"Developer","checkedAt":"2026-10-27T02:36:30.000Z","note":"Documents peer configuration, private keys, keepalives and the demonstration-only setup."},{"label":"WireGuard conceptual overview","url":"https://www.wireguard.com/","type":"Developer","checkedAt":"2026-10-27T02:36:30.000Z","note":"Explains public-key peers, tunnel addresses and cryptokey routing."}],"body":[{"heading":"Decide what each peer can reach","text":"The official documentation associates peer public keys with allowed tunnel addresses. Our recommendation is to start with only the station destinations required for your task, alongside appropriate host and network firewall rules. Keep private keys private, record which device owns each configuration, and have a way to remove a lost device's access."},{"heading":"Test network access separately from radio control","text":"A recent tunnel handshake or successful network request is only one stage of the station check. Verify the radio application's authentication, audio and safe shutdown behavior separately. The quick start discusses keepalives for some NAT situations; they are a connectivity option, not a general requirement or a cure for every firewall problem."}],"caveats":["This is a planning guide, not a tested configuration for a particular radio, router or internet provider.","The official demonstration server is for testing; do not use demonstration credentials or insecure setup shortcuts for a production station."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:36:30.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:51:00.165Z","updatedAt":"2026-10-27T02:51:00.165Z"}},{"resourceId":"wsjtx-weak-signal-start","revision":1,"reason":"Initial collection: primary-source research checked October 26, 2026.","createdAt":"2026-10-27T00:44:48.901Z","record":{"id":"wsjtx-weak-signal-start","title":"FT8 and beyond: the WSJT-X starting point","summary":"WSJT-X connects familiar HF station skills with computer-assisted weak-signal operating. The official project covers FT8 and FT4 contacts, WSPR propagation experiments, and modes for meteor scatter and moonbounce. Begin with the project's own downloads and user guide, then choose a mode for the activity you want to try. The library entry is an orientation resource, with official documentation kept one click away.","canonicalUrl":"https://wsjtx.github.io/wsjtx/index.html","topics":["hf-digital","sdr-discovery"],"tags":["FT8","FT4","WSPR","WSJT-X","HF","Windows","macOS","Linux"],"kind":"Guide","maturity":"Reference","level":"Beginner","sources":[{"label":"WSJT-X official project","url":"https://wsjtx.github.io/wsjtx/index.html","type":"Official documentation","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."}],"body":[],"caveats":["The official homepage distinguishes full releases from development versions; check the release notes before installing.","No station or software installation was tested here."],"reactions":[],"media":{"src":"/hot-topics-media/icom705.jpg","alt":"ICOM IC-705 (illustrative equipment photograph).","credit":"Batchman99 / Wikimedia Commons","license":"CC BY-SA 4.0","licenseUrl":"https://creativecommons.org/licenses/by-sa/4.0/","sourceUrl":"https://commons.wikimedia.org/wiki/File:ICOM_IC-705.jpg"},"attachments":[{"label":"Radcom signal observation worksheet (TXT)","url":"/hot-topics-downloads/signal-observation.txt","hosted":true,"license":"Radcom original · CC BY 4.0"}],"checkedAt":"2026-10-27T00:18:03.810Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T00:44:48.901Z","updatedAt":"2026-10-27T00:44:48.901Z"}},{"resourceId":"wsjtx-weak-signal-start","revision":2,"reason":"Worksheet reuse notice clarified (v2); factual source checks unchanged.","createdAt":"2026-10-27T02:12:02.591Z","record":{"id":"wsjtx-weak-signal-start","title":"FT8 and beyond: the WSJT-X starting point","summary":"WSJT-X connects familiar HF station skills with computer-assisted weak-signal operating. The official project covers FT8 and FT4 contacts, WSPR propagation experiments, and modes for meteor scatter and moonbounce. Begin with the project's own downloads and user guide, then choose a mode for the activity you want to try. The library entry is an orientation resource, with official documentation kept one click away.","canonicalUrl":"https://wsjtx.github.io/wsjtx/index.html","topics":["hf-digital","sdr-discovery"],"tags":["FT8","FT4","WSPR","WSJT-X","HF","Windows","macOS","Linux"],"kind":"Guide","maturity":"Reference","level":"Beginner","sources":[{"label":"WSJT-X official project","url":"https://wsjtx.github.io/wsjtx/index.html","type":"Official documentation","checkedAt":"2026-10-27T00:18:03.810Z","note":"Original documentation and context."}],"body":[],"caveats":["The official homepage distinguishes full releases from development versions; check the release notes before installing.","No station or software installation was tested here."],"reactions":[],"media":{"src":"/hot-topics-media/icom705.jpg","alt":"ICOM IC-705 (illustrative equipment photograph).","credit":"Batchman99 / Wikimedia Commons","license":"CC BY-SA 4.0","licenseUrl":"https://creativecommons.org/licenses/by-sa/4.0/","sourceUrl":"https://commons.wikimedia.org/wiki/File:ICOM_IC-705.jpg"},"attachments":[{"label":"Radcom signal observation worksheet (TXT, v2)","url":"/hot-topics-downloads/signal-observation.txt","hosted":true,"license":"Radcom original · CC BY 4.0"}],"checkedAt":"2026-10-27T00:18:03.810Z","sourcePublishedAt":null,"status":"published","revision":2,"createdAt":"2026-10-27T00:44:48.901Z","updatedAt":"2026-10-27T02:12:02.591Z"}},{"resourceId":"yaesu-ftx1-field-optima","revision":1,"reason":"User-requested source-checked library expansion; original factual summary with source dates and product-status caveats.","createdAt":"2026-10-27T02:48:39.719Z","record":{"id":"yaesu-ftx1-field-optima","title":"Yaesu FTX-1 Field and optima: compare the complete configurations","summary":"Yaesu’s FTX-1 family combines HF, 50 MHz, 144 MHz and 430 MHz operation with a detachable field-oriented radio head. The Field package includes its battery; optima adds the SPA-1 amplifier for a base-station arrangement. Yaesu distinguishes battery output from externally powered output, so compare complete configurations rather than reading the largest power number as a capability of every portable setup.","canonicalUrl":"https://yaesu.com/product-detail.aspx?CatName=HF+Transceivers/Amplifiers&Model=FTX-1+Series","topics":["portable-field","hf-digital","digital-voice","cw-morse"],"tags":["Yaesu","FTX-1","Field","optima","C4FM","portable radio","product spotlight"],"kind":"Guide","maturity":"Reference","level":"Intermediate","sources":[{"label":"Yaesu FTX-1 series product page","url":"https://yaesu.com/product-detail.aspx?CatName=HF+Transceivers/Amplifiers&Model=FTX-1+Series","type":"Manufacturer","checkedAt":"2026-10-27T02:40:23.000Z","note":"Field/optima packages, battery/external power distinctions and supported modes."},{"label":"Yaesu FTX-1 operating manual","url":"https://www.yaesu.com/Files/4CB893D7-1018-01AF-FA97E9E9AD48B50C/FTX-1_OM_ENG_EH084M201_2506E-DS.pdf","type":"Manufacturer","checkedAt":"2026-10-27T02:40:23.000Z","note":"Operating configurations, battery duty-cycle context and optional tuner."}],"body":[{"heading":"Match the package to the outing","text":"The manufacturer lists 6 W operation from the supplied battery and up to 10 W from an external 13.8 V supply for the field head. Decide whether your priority is a compact battery station, a higher-power home configuration, or moving between the two."},{"heading":"Count the supporting equipment","text":"Check which tuner, cooling and antenna accessories are included or optional for the exact package. Yaesu’s battery-runtime figures use stated duty cycles, so they are not a promise for continuous transmission or your chosen digital mode. Use the manual to plan the actual station."}],"caveats":["Product reference; no first-release date or present stock guarantee is asserted.","Published battery and power figures are manufacturer specifications, not results from a field test."],"reactions":[],"media":null,"attachments":[],"checkedAt":"2026-10-27T02:40:23.000Z","sourcePublishedAt":null,"status":"published","revision":1,"createdAt":"2026-10-27T02:48:39.719Z","updatedAt":"2026-10-27T02:48:39.719Z"}}]}