RADIANCE
InternetSignalWi-FiBluetoothHFVHFLoRa
DMR
Choose talkgroup ▾
Fictional activity · no streamSample talkgroups
StoppedTalkgroup 724Monitoring stopped
Mesh RadioConnected · DEMOOpen Mesh Lab ↗

Mesh Radio · LoRa

Receive only · text appears in Communicator. Sending and radio-setting changes are not enabled.

Sample USB receiver · simulated connection

Radiance connects through USB/Companion. Your device’s BLE can use the Meshtastic phone app.

2 fictional nodes · heard and cached are not an online roster

Connection LED: green when connected, amber while connecting or needing attention, gray when disconnected. RF activity is reported separately. MQTT activity is separate, not proof of radio reachability.

Decoder

CW
Receive settings

Receive settings

Waiting for audio · decoding stays on this device

DEMO · CW · 600 Hz

Sample receiver · not connected

WaterfallRX A · SAMPLE

Synthetic signal
Display Professional SDR
Dark instrument display · spectrum and high-contrast waterfall
28.02628.03828.05028.06228.074 MHz
Saved locally

Club administration

Report a concern

Reports are stored for review. This is not an emergency service.

Local notebook & logbook

Raw notes are saved on this browser as soon as you press Save note. Export a backup to keep them elsewhere.

LISTEN TO THE WORLD

Free online radios

Internet · Receive only

Choose a community receiver, then tune using its controls. No radio hardware or antenna needed.

Open receiver ↗

Receiver blank or busy? Use Open receiver or choose another station. You may need to press the receiver’s audio start button. Closing this window stops the embedded receiver; separate tabs must be closed there.

Hosted by independent operators; availability and listening slots vary. For live CW decoding, open the receiver in its own tab, then select Online SDR · Internet receiver in Radio configuration and Start receive. The embedded listening window alone does not feed the decoder.

Station Setup

Setup help
Audio sourceYour radio · live waterfall · CW decoding

Connect Companion

Sample setup · no Companion paired

First time? Install and start Companion

For USB radios, SDR and Mesh Radio. Recordings and direct online listening can work without it.

Companion setup help

Download Mac companion

Adapter detailsPair the Mac companion to read Wi-Fi and Bluetooth power.

Mesh Radio

Mesh setup help
Radio configuration Sample nickname · not saved Unsigned developer package · Python 3.11+ required. IC-705 USB SEND and USB keying must remain off. This station is receive only.

Choose an input to begin.

Free online radios · receive only

No radio or antenna? Listen through a community receiver over the Internet.

Free listening · Internet required · no transmitting
FT8 · WSJT-X integrationFT8 transmission is controlled in WSJT-X. Radiance displays its decoded messages through paired Companion.
Receive & transmit setup ↗

Using IC-705 control in Radiance? Release it here before opening its control port in WSJT-X. This stops station receive audio; Mesh and the FT8 feed stay connected.

FT8 feed off.

Feature roadmap

Station configuration and CW receive are available. Internet test groups start with 12 hours and support four humans, including their creator.

Additional native decoders are coming soon. Locked controls remain unavailable.

FT8 audio decoder is coming soon.

Saved setups

Sample setup · not saved

Appearance

AUTOMATIC TOUR

Simulated station · no radio needed
Exit