RADIANCE / FIELD GUIDE

From a recording to readable CW.

You do not need a connected radio to test the decoder. Use a short, clear Morse recording and compare the result with a known message.

REAL LOCAL CW DECODING / INVITED TRIAL

Open a recording.

  1. Open the real Operate trial with your invited account. Choose Open recording and select a WAV or MP3 file under 50 MB and shorter than ten minutes. PCM WAV is a good fallback if a file cannot be read.
  2. Radiance checks the audio format, duration and signal level. A readable file shows its duration and sample rate. File readability alone does not mean the signal can be decoded.
  3. Playback and CW decoding start locally after a usable file is opened. If the browser blocks audio, select Decode. Keep playback volume low.
  4. Open Receive settings and set the approximate starting WPM. Use automatic tone tracking for a clean signal, or turn it off and select the intended CW trace in the waterfall.
  5. Watch the transcript and compare it with the recording. Use Pause and Resume as needed. Select Decode to replay from the beginning after adjusting settings.

Know what you are testing.

This is actual audio processing, not a scripted transcript. It is CW receive decoding. FT8, RTTY, PSK31, speech or music will not become readable just because the file opens.

The browser selects the strongest audio channel from a multi-channel file. Playback volume changes what you hear without changing the decoder input. Your recording is processed on your computer, not uploaded for decoding.

If text is missing or garbled.

Try a clean, single-station recording. Check the tone and approximate WPM, then replay. Strong neighbouring signals, fading, clipped audio and irregular hand-sent Morse can reduce accuracy. Uncertain characters may appear as squares; verify the text yourself.

For a repeatable first test, generate a clean 20 WPM CW WAV in Wav & More, keep its message as an answer key, then open that file in Operate.