RADIANCE / FIELD GUIDE

Start with the audio your radio receives.

A compatible receive-audio path matters more than a model name in a list. Begin with USB audio or a suitable audio interface on current Chrome or Edge.

CW RECEIVE BETA / HARDWARE TESTING IN PROGRESS

Generic receiver audio.

If your computer can see your receiver or interface as an audio input, you can try My radio · USB / audio input. Allow browser audio access, choose that input explicitly and start receive. No Companion is needed for this path.

This provides a live audio waterfall and CW decoding. It does not provide general CAT tuning or radio control. Tune on the radio; Bluetooth radio control is not available.

Experimental Companion paths.

  • Icom IC-705: Mac Companion can read frequency and mode through CI-V. Receive audio is a separate connection. This is read-only status, not full CAT control.
  • RTL-SDR: receive and spectrum use the Mac Companion path and compatible hardware. This remains experimental.

Start Companion locally and use its current pairing code. The developer package is unsigned and requires Python 3.11 or newer. Hardware combinations still need operator field testing; these paths are not compatibility certifications.

What is not supported by a promise.

A radio appearing in a catalogue does not verify that its control adapter works. Other radios can still supply generic receive audio through a compatible interface. Full control for additional models and native decoding of future locked modes are not available.

Receive only. Start with low audio levels. Never connect an antenna, RF output or speaker-power output directly to a computer audio input. On IC-705, leave USB SEND and USB keying off.